Welcome to Our Community

Some features disabled for guests. Register Today.

Build List

  • Active Filters:
    2

F-Ender-Plus 3D Printer

Sep 7, 2024
Category
Cartesian Style Bots
Build Progress
Build in Progress...

F-Ender-Plus its based on the Ender 3 Pro, but improved: CR-10 hotend, double gear extruder, double z-axis motor, bltouch incorporated, hotbed leveling improved strings kit. Most made using local vendor parts, and still I'm increasing my knowledge of how get better 3D printings by calibrating motors steps, leveling the hotbed and z-axis; using a 3mm thick glass...

Nema 23 Belt and Pinion Actuator

Aug 20, 2024
Category
ACTUATOR
Build Progress
Build Complete!

This easy to build and effective system can take your builds to the next level! This design is strong and accurate and could be the solution/upgrade that you've been looking for!

Arduino Mega to EMC2 (LinuxCNC) Plasma Table Conversion

Jul 29, 2024
Category
Plasma Cutter Builds
Build Progress
Build Complete!

This is a story about a guy who started with a $25 set of plans, and through 4 iterations/ rebuilds, ended up with a professional quality CNC plasma table capable of cutting anything steel up to 2 inches thick.

Standalone Torch Height Controller for CNC Plasma Cutting

Mar 4, 2021
Category
Plasma Cutter Builds
Build Progress
Build Complete!

A Torch Height Controller helps improve plasma cut quality and can save a CNC Machine from crashing. This design doesn't require you to know electronics or need any custom circuits... Its plug and play! This is a COMPLETELY standalone controller with a built-in Driver powerful enough to run just about any stepper motor. (maybe a little to powerful for a NEMA17)

Rezo 1390 100W CO2 Laser

Jul 26, 2023
Category
Laser Cutter Builds
Build Progress
Build Complete!

This laser is a beast. Designed by Jonathan Frost, and built with 45x45mm aluminum for ultimate rigidity. It has a 4'x3' bed with a pass through that can be utilized to cut full 8x4' sheets of plywood, and has a motorized bed. Rēzo is not only faster and more capable than lasers like Thunder Lasers Nova 51 and Aeon Nova 10, but the final build costs are 40-60% less than said commercially available machines. Plans can be found at https://rezo1390.bigcartel.com/product/rezo-1390-plans

Embroidery machine with XY belt and pinion drive.

Apr 22, 2014
Category
Everything Else
Build Progress
Build in Progress...

A simple Embroidery machine using an XY belt and pinion drive to drive a hoop under a standard sewing machine. Needle timing, machine power and stepper control are all provided by a PIC processor. A tablet provides the higher level formatting required for communicating with the PIC chip.

M4: 1510SS Heavy Mk.I

Aug 22, 2020
Category
Cartesian Style CNC
Build Progress
Build in Progress...

A 1500x1200mm, 20mm rail and 1610 ballscrew, heavy-duty, four-axis gantry machine. As high speed as spindle power MRR will allow for. Approx 4 x 3 x 1ft travels, intermediate size between benchtop and floor-scale units. Aiming at $10-15k machine in the $3k region.

C-Beam XLarge X/Y Table

Oct 25, 2019
Category
ACTUATOR
Build Progress
Build Complete!

This OpenBuilds C-Beam XLarge X/Y Table is a great display of how easy it is to modify and create awesome configurations with the OpenBuilds system!

Cricut Expressions 2 to ESP32 GRBL Control

Nov 18, 2018
Category
Everything Else
Build Progress
Build in Progress...

A log of my "brain surgery" on a Cricut Expressions 2 to change the control board to something open so that I could cut what I wanted. The ESP32 GRBL board I used has bluetooth and WIFI built-in and was very easy to get working just the way I wanted.

45W CO2 Laser Build

Jun 10, 2021
Category
Laser Cutter Builds
Build Progress
Build Complete!

A co2 laser build that is heavily inspired and based quite a bit off Pedro Fernandez' 50w co2 laser build. This is my first build post so, bare with me.

Y-1200 co2 laser

May 31, 2022
Category
Laser Cutter Builds
Build Progress
Build in Progress...

Y-1200 Build The Y-1200 has a cutting area of 1200 x 600mm and the main chassis has a external size of 1620 x 955 x 450mm. The recommended power output is 60-90W, this can also be increased with the use of an extension box. designed by furtherfabrication ROB CHESNEY FREELANCE INDUSTRIAL DESIGNER.

OpenBuilds OX CNC Machine

Apr 23, 2021
Category
Cartesian Style CNC
Build Progress
Build Complete!

OpenBuilds OX CNC Machine. A strong easy to build shop CNC router that can be sized to suit your needs. Many new features have been incorporated into the OX to make it a great router that is sure to inspire!

Custom 40W Laser Cutter

Oct 11, 2022
Category
Laser Cutter Builds
Build Progress
Build in Progress...

So this is my custom 40W build. I wanted to make another laser similar to the one I built but a lot smaller and an all in one system so that if I ever decide to do a farmers market or something similar, I wanted to be able to put the laser on the back of the car and drive to whatever location. I think it's going to work. It will be see-through with lights and screens eveywhere. The lights alone should attract people like flies. That's the plan anyway.

Sphinx 55 on MGN12 linear rails

Sep 8, 2019
Category
Cartesian Style CNC
Build Progress
Build in Progress...

My machine is a combination of the Openbuilds Sphinx 55, MGN12 linear rails knockoffs and custom made plates made by Chris Laidlaw

DIY Embroidery Machine V2

Jun 11, 2019
Category
Everything Else
Build Progress
Build Complete!

My second attempt at an affordable sewing machine embroidery add on. This one uses readily available electronics modules and 3D printable parts where possible.

+Laser

Sep 2, 2018
Category
Laser Cutter Builds
Build Progress
Build Complete!

A minimalist 2-axis A2 sized laser diode cutter/engraver. Designed to give the most function using the very least number of parts at the lowest price.

Indie i2

Mar 10, 2021
Category
Cartesian Style Bots
Build Progress
Build Complete!

A lightweight, portable, accurate 3D Printer that has a good sized print area and small overall footprint that is easy to build, with easy to source components. The design is OpenSource allowing those with the capability to make their own parts get up and running.

Travel Printer

Jun 9, 2022
Category
Polar Bots
Build Progress
Build in Progress...

Build using standard parts as much as possible, Open Builds etc. To keep printer usable for more materials will be trying a heated bed with rotary elec union for the thermistor and power.

UK40OB

Mar 9, 2020
Category
Laser Cutter Builds
Build Progress
Build Complete!

Modifying the K40 laser cuter stock gantry in favor of OpenBuilds superior and smoother movement. Also will provide me a better level control for easier beam alignment.

Custom build 80w Co2 Laser Cutter

Jan 18, 2022
Category
Laser Cutter Builds
Build Progress
Build Complete!

Building a custom made 80W Co2 Laser cutter. Making it from scratch and it's a work in progress but I've learned a lot and I'll be sharing a bit of that knowledge with you guys since I've learned a lot from here.

LS-LASER

Oct 3, 2018
Category
Laser Cutter Builds
Build Progress
Build Complete!

I have completed some custom build 3d printers (i3 and delta style) and a cnc mill based on v-slot and c-beam. From the beginning the cnc was built to fit/change between router, 5w led laser module and plotter pen. While all three works great, the build is primarily focused on heavy duty milling and brings some disadvantages when it comes to laser - slow because of leadscrew motion system and not as powerful because of “only” led laser. That is why I have started this build of co2 laser machine.

A simple XY laser engraver/cutter

May 31, 2018
Category
Laser Cutter Builds
Build Progress
Build Complete!

A simple low-cost XY plane laser engraver/cutter inspired by the Much 4 laser build, with minimal parts and assembly time. Uses standard off the shelf components in almost 90% of the build with the exception of the axes motor and wheel mounts which need to be 3D printed.

Phlatformer v2

Aug 29, 2015
Category
VACUUM FORMING MACHINES

Hello, I have been looking around for a vacuum forming machine for a long time, and could not find one that was either in my price range or was safe enough for me to want in my home. The Phlatformer answers both of these requirements... Unfortunately, it was not available in either cut-out or...

K40 upgrades

Jan 26, 2022
Category
Laser Cutter Builds
Build Progress
Build in Progress...

Cheap chinese K40 laser upgrades, including 60x30cm working area, MKS or SKR controllerboard (smoothieware or marlin, not yet decided.) Light, psu and a bit more :)

GIGAWATT 2.1 LASER CUTTER

Jan 6, 2022
Category
Laser Cutter Builds
Build Progress
Build in Progress...

Progetto di un laser CO2 da 50w Autocostruito, con scheda di controllo MKS Sbase v.1.3 Firmware Smoothieware versione CNC Struttura realizzata con profili T-slot 20x20 e 20x40

(Smaug) 100w 1500x1000mm CNC Laser

May 11, 2021
Category
Laser Cutter Builds
Build Progress
Build in Progress...

Laser CNC made with mostly Openbuilds and amazon sourced components. Lots of 3d printed components as well. The main purpose is to cut EVA foam.

Modified Sphinx 55 with MGN12 linear rails

Aug 2, 2020
Category
Cartesian Style CNC
Build Progress
Build Complete!

Inspired by previous Sphinx builds by Sorin (w/ MGN Rails) and Kenneth's witthuhnCNC XKLBR-1S. I wanted to create a desktop unit that kept a minimal profile and neatly contained the PS, Controller, and all wiring, making it a singular unit that could be easily transportable (as it will be doing double duty at my home and at work)

Bessy 4x4

Jan 24, 2021
Category
Cartesian Style CNC
Build Progress
Build Complete!

I found this to be a very fun exercise in building Bessy and will continue to improve her in the future.

Sphinx Derived Router

Jul 6, 2020
Category
Cartesian Style CNC
Build Progress
Build in Progress...

I Like the Sphinx design thought I would attempt my first build. I wanted to build this and use Arduino controller with GRBL to be able to learn and understand my machine.

Beamlazer Laser cutter CO2 100W

Jan 4, 2020
Category
Laser Cutter Builds
Build Progress
Build in Progress...

Hi everyone, im new to the world of lasercutters but i have been granted access for a Trotec laser for a while with old firmware and only compability trought Windows XP. Then i decided to build my own laser, with some easier workflow and support for Windows 10. Since im still a student i have limited resources, so i will try too use scrap parts as much as possible. I will publish photos and updates during my build continously. Gladly taking advices from others.

Openbuilds CNC (witthuhnCNC XKLBR-1S)

Feb 25, 2020
Category
Cartesian Style CNC
Build Progress
Build Complete!

Based on the popular C-beam / V-wheel design, with the largest available work area, relative to machine size. Screw driven with anti-backlash, integrated drag chains, Carbon fibre gantry plates, Openbuilds BlackBox Controller (USB), Transformer & kill switches, with internal wiring, limit switches & Nema 23 motors.

INDY-TR12 CNC (12mm Diameter Lead Screws)

Jun 7, 2019
Category
Cartesian Style CNC
Build Progress
Build in Progress...

TR12x3 screws, M8 wheel sets, a draw built into the design, an electronics set built onto the kit, back brace to stop C-Beam twist.

Emmett-Delta

Oct 21, 2016
Category
Delta Bots
Build Progress
Build in Progress...

Delta 3d Printer using 3/4" Electrical Metal Tubing (EMT) for Horizontals & 2060 V-Slot for the Verticals and adding a tetrahedron at the top.

Openbuilds rovo laser mini(오픈빌드)

Sep 16, 2015
Category
Laser Cutter Builds
Build Progress
Build Complete!

laser mini 20 * 40 OPENBUILDS base frame.(크기 412x455mm) laser mini 20*40 기본프레임입니다. 기존 여러부품을 사용한 제품보다 부품수를 줄이면서 최소한의 단가를 뽑을려고 디자인했습니다.. 기존대비 부품수 절반에 단가도 절반을 줄이면서 최적의성능을 내려합니다.

Lead 1010 Build - Anything but stock.

Feb 24, 2020
Category
Cartesian Style CNC
Build Progress
Build in Progress...

This is a lead 1010 build that I wanted to have a little fun with. I purchased the whole Lead 1010 kit, and felt like studying a few shortcomings of the original to see if I can improve it or just have some fun with it.

1250x1000 Build

Jan 9, 2020
Category
Laser Cutter Builds
Build Progress
Build in Progress...

A new design of my based on a couple different machines I have seen both on openbuilds and youtube. In the end will have a and X/Y workspace of 1250mm x 1000mm and a Z axis range of about 200mm.

RigidOko

Sep 3, 2019
Category
Cartesian Style CNC
Build Progress
Build Complete!

Heavily upgrading my 1200x500 Shapeoko 2... ...er, wait, scratch that... Building an all new machine, roughly the same size, that should be more rigid than a Shapeoko 3!

Fixed Gantry CNC Router with Old Industrial Supplies

Oct 8, 2019
Category
X/Y Table Style CNC Mill
Build Progress
Build Complete!

I got lucky enough to purchase aluminum extrusions and linear motion components (and nuts/bolts/etc) at scrap metal prices when a bunch of industrial automation equipment was decommissioned. The only problem is that the aluminum extrusions are not metric sizes... they are the 1.5"x3" 80/20 series. It has presented a few challenges but nothing too bad.

TrueUp Kit Version

Aug 10, 2017
Category
Cartesian Style Bots
Build Progress
Build Complete!

A Cartesian printer using bushings for the Z axis instead of wheels or linear bearings. The design also synchronizes two Z axis screws with a timing belt for a level lift. The ratio of the drive pulley and Z axis pulleys produce .005 lift per full step on a 200 step motor, eliminating layer resolution "drift" caused by microstepping.

CoreXY 3D build one

Sep 20, 2019
Category
3D PRINTER BUILDS
Build Progress
Build Complete!

an 8020 build with 1010 extrusion (1") Square tubing Rough size is 24x24x36 (600x600x900) The expected usable print area 21.5x21.5X32"roughly (510x510x760) An XY 3D printer with 3 extruders and 3 Z-axis 0.9 degree motors the table (Z-AXIS) will lift up to the XY Carriage on 3 12mm linear rod and 3 8mm Lead screw's Corexy designs complete and Z-axis build is started don’t have a 3D cad system yet so building my prototypes on a pcb layout tool

D&R Tiger Paw build combo

Feb 17, 2019
Category
Cartesian Style CNC
Build Progress
Build Complete!

The Tiger Paw will be a 1000mm X 500mm Cartesian style CNC with the Minimill attached to the end. It is named the D&R Tiger Paw because my son, Daniel, and myself, Richard, will put this Tiger strong and fast machine together. Our goal is to have a Tiger strong build with a Paw print that wouldn’t take up a huge amount of space in our garage.

Rawcnc 1.5 Desktop Edition

Jul 11, 2018
Category
Cartesian Style CNC
Build Progress
Build in Progress...

This will showcase the build of my Rawcnc 1.5. A rigid cnc router from the Swedish company Rawcnc, featuring a rather cool linear motion system, rack & pinion and steel reinforced X-axis capable of milling aluminum.

Openbuilds Co2 80w Laser Cutter

Apr 28, 2017
Category
Laser Cutter Builds
Build Progress
Build in Progress...

Co2 80 watt openbuilds laser cutter, 1200mm laser tube, 1500x1000x500mm dimensions. Build frame first and then panels to be added.

South Carolina Workbee 1000X1000

Jun 8, 2019
Category
Cartesian Style CNC
Build Progress
Build in Progress...

This is about my build of a Workbee 1000X1000 being built here in Trenton, SC. My goal is to use it to help cut the new panel for my RV6A airplane.

Shapeoko 2 - my first CNC

Jan 4, 2019
Category
Cartesian Style CNC
Build Progress
Build Complete!

This was my first foray into CNC. I chose to go with a reliable kit build since my knowledge of GCode, controllers, and steppers was pretty rudimentary.

Coined by my family as the: Davomatic

Aug 12, 2018
Category
Cartesian Style Bots
Build Progress
Build in Progress...

Build Notes: Here are all the parts necessary to re-produce this design. Please note, all of the parts are either sourced through openbuilds or have been selected and printed from thingiverse.

Black Rabbit 1500

Sep 2, 2016
Category
Cartesian Style CNC
Build Progress
Build Complete!

This is a router that I designed that is loosely based on the Openbuilds Ox, but designed to be heavy duty, rigid, and yet quick and agile.

Workbee "style" 1010 cnc

Feb 12, 2019
Category
CNC ROUTER BUILDS
Build Progress
Build in Progress...

This build is based on the Workbee 1010 CNC. It is not a kit build and is much the same as the original but with some significant changes made here and there as the build progresses.

CNC ESS Controls System

Jan 22, 2019
Category
Everything Else
Build Progress
Build in Progress...

My Controls box to run my Workbee 1510 That was retrofitted with Lead Screws as well as Lineal Bearings. The stock electrical configuration was not enough, so here are the Measures that I took to not only make this machine Run again, but to have fun with it, and make this system be able to run any CNC I run in the future with the installed microcontroller.

Loading...
Loading Build images...
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice