Welcome to Our Community

Some features disabled for guests. Register Today.

Build List

  • Active Filters:
    2

SOLAC: Space Optimized LAser Cutter

Mar 9, 2017
Category
Laser Cutter Builds
Build Progress
Build in Progress...

The Space Optimized LAser Cutter is a 40 watt CO2 laser cutter that supports a maximum part volume of 24" x 16" x 6.25". It consists of a V-slot frame + brackets/mounts designed to be 3D printed on a consumer desktop printer. Total cost of the machine is ~ $1,400 USD.

Rob's C-Beam Machine XLarge

Feb 28, 2018
Category
X/Y Table Style CNC Mill
Build Progress
Build Complete!

This is my first CNC router build, so I started with the OpenBuilds C-Beam Machine XLarge mechanical bundle, including four high torque stepper motors. I took my time with the mechanical build, sought and found some great help for my control system, and designed and built a custom cabinet to house everything.

Desktop CNC

Oct 15, 2018
Category
Cartesian Style CNC
Build Progress
Build Complete!

This unit is made with openbuild v-rail and c-beam. using direct drive with lead screws. Nema23 motors

CNC-machine 650by700

Feb 4, 2018
Category
CNC ROUTER BUILDS
Build Progress
Build in Progress...

A home-made CNC-machine with a 1.5 kW air cooled spindle motor suitable for milling materials such as wood, plastic and soft metals. The work table is 650 mm wide by 700 mm deep and the maximum movement is set to 560 mm for the x-axis, 480 mm for the y-axis and 105 mm for the z-axis.

Live C-Beam Build @ MRRF2018

Mar 26, 2018
Category
X/Y Table Style CNC Mill
Build Progress
Build Complete!

Contained within are links to our OpenBuilds sponsored C-beam Machine live build taking place at MRRF 2018 (Midwest Reprap Festival) on March 24 and 25, 2018. There will also be some build images and a few 3D printed STL items that were added.

C-Beam Rigid - 'The Hog'

Apr 25, 2017
Category
X/Y Table Style CNC Mill
Build Progress
Build Complete!

C-Beam Machine baseline build. DW618 Spindle. SuperPID. Gcode Controlled Mist Coolant. Rigid Work Surface. NEMA 23 (425oz-in) Leadshine 4 Axis Stepper Driver. LinuxCNC (MachineKit) Tool Touch Off Probe.

Bedroom Builds (BrB) DIY CNC

Jan 12, 2018
Category
X/Y Table Style CNC Mill
Build Progress
Build in Progress...

So I am employed in the automotive industry and I walk by thousands of dollars of CNC products daily that are no use to me due to being a Technologist and not a machinist. So therefore with some research I found openbuilds and their great selection of products to build my own CNC. This CNC will consist of 4 axis one removable 360 degree axis for turning alongside a x axis table Y axis stationary gantry and a Z axis attracted to the Y axis linear actuator.

DaveP's Homemade CNC Project

Feb 7, 2018
Category
Cartesian Style CNC
Build Progress
Build in Progress...

Somewhere along the line sometime around February 2017 I got the bug in my head that I needed to build a CNC router. This is where I am today...

Upgrading the C-Beam machine

Jan 20, 2017
Category
Other Style CNC Mills
Build Progress
Build in Progress...

So we have new plates, stronger motors, belt drive reduction, but what should we do with them? In this article you might find the answer you were looking for as we took an “old” C-Beam machine and started to upgrade the X/Z body and added more torque and precision to the Z-axis.

Build #2 - Bigger & Stronger

Jan 11, 2018
Category
X/Y Table Style CNC Mill
Build Progress
Build in Progress...

Large format CNC router with a 1500mm x 3000mm cutting envelope (5 x 10 ft) strong enough to cut wood and aluminum constructed from 20-series and 40-series aluminum extrusions. Complete Project Log w/ Pictures: https://goo.gl/photos/Co81AvGwVijE2zow9

Arizona OpenBuilds MiniMill CNC

Jan 1, 2018
Category
X/Y Table Style CNC Mill
Build Progress
Build Complete!

I ordered the OpenBuilds MiniMill from the OpenBuilds Parts Store http://openbuildspartstore.com/ They were out of Motors and Electronics when I ordered so I had to source these items elsewhere. But it turned out well doing it this way.

80watt Lasercutter, workingarea 105x52[cm], steel frame

Dec 13, 2017
Category
Laser Cutter Builds
Build Progress
Build in Progress...

I will write a short buildlog here with mostly pictures. I designed this lasercutter in solidworks(not totally finished) for a good overview and such that the steel tubes could be lasercut by a company, the metal frame is based on the lasercutter the KÄSER, which you can find on cnczone.nl. The mechical parts are designed by myself because I had no mill to my use, so the mechnical parts are lasercut(same company as tube) steelplates welded together.

Small Portable PCB CNC Machine (CoreXY)

Jun 24, 2015
Category
CNC ROUTER BUILDS
Build Progress
Build in Progress...

This is a small CNC mill/router specifically for manufacture PCBs. This is based on the corexy gantry setup. The plan is to have a small, light self-contained machine that can be used and easily but away when it's job is done.

Vertical Mill

Nov 22, 2017
Category
X/Y Table Style CNC Mill
Build Progress
Build in Progress...

This will be a CNC milling machine. My goal is to make this mill for the minimum cost I can while not sacrificing quality. In hope of staring an educational YouTube channel on CNC milling and 3D Printing. Along with when to use both.

UltiFaker 2 Go

Mar 21, 2016
Category
Cartesian Style Bots
Build Progress
Build Complete!

This is a breakdown of how I designed the UltiFaker 2 Go as well as how I machined and assembled it. I'll include a complete BOM and all of the drawings and prices.

1500x1000mm Adjustable Height

Jul 9, 2017
Category
Cartesian Style CNC
Build Progress
Build in Progress...

I have the demand to cut/etch tall pieces of material. For this reason, I have designed a machine with 500mm uprights with adjustable gantry height. This way I can raise/lower the sled and z-axis as needed. I've also chosen to use a linear C-channel assembly for the Z axis with the plate mounted to the gantry instead of the other way around. This will allow for maximum range of the z-axis. The parts list/BOM does not include motors/belts/pulleys or electronics.

RiNo Route

Jan 5, 2017
Category
CNC ROUTER BUILDS
Build Progress
Build Complete!

A CNC router designed to handle a 4'x8' sheet, for as close to $2000 as possible. The price barrier resulted in my choice to use timing belts rather than leadscrews or rack&pinion. Build List still being updated

CO2 Tube life expectancy experiment - Sponsored in part by Openbuilds

May 11, 2017
Category
Laser Cutter Builds
Build Progress
Build in Progress...

Hypothesis - Running CO2 laser tubes at high amperage may shoirten tube life in number of hours, but will be made up for by the increase in actual inches engraved/cut using the higher power. This is a long term experiment, so the build status will remain as "Build in progress" until the experiment has been completed.

Live D-bot build at MRRF 2017 (Mar 25-26)

Mar 21, 2017
Category
H-Bot and Core XY
Build Progress
Build in Progress...

I will be attending the 2017 Midwest RepRap Festival (MRRF) with a small team of printer enthusiasts with a goal to fully assemble a Core-XY D-bot onsite during the event. This is our first attempt at building a D-bot and we will be learning things as we go. Our hope is to have the entire machine assembled, wired, and functional (at least to the setup and testing phase) before the end of the show. Please attend and watch us in person or visit our feed channel during/after the event.

L'FOX - Large Format OX deriviative. Designed and built by Revision 13 Prototypes

Mar 9, 2017
Category
Laser Cutter Builds
Build Progress
Build in Progress...

This build is for a testing rig to use while testing out different controller boards and CAM software for milling and routing. It is in the early stages, planning is complete, parts are ordered. Awaiting parts delivery to start build. Please not the BOM only covers parts from the OpenBuilds part store. I will be posting the other required items very shortly.

MULIMATERIAL 3D PRINTER (in progress)

May 16, 2016
Category
Cartesian Style Bots
Build Progress
Build in Progress...

ELECTRONICS - ARDUINO Mega 2560 + RAMPS 1.4 + power supply 12V - Leadshine DM 5042 external driver + Power supply 36V + NEMA 23 stepper motor SOFTWARE - Repetier Host to communicate with the Ramps - ARDUINO to upload the firmware (Marlin) MECANIC - V-Slots rails 40x40 + home-made plates - everything goes fine on the side of the build

Hlidskjalf, CoreXYU (dual X-carriage)

Jan 21, 2017
Category
H-Bot and Core XY
Build Progress
Build in Progress...

Dual X-Carriage CoreXY. Not impossible, but probably the only one. Use the link to Thingiverse "Hlidskjalf" for parts and downloads.

CNC Line Boring Machine

Aug 8, 2016
Category
Everything Else
Build Progress
Build Complete!

This is a CNC Line Boring Machine for our cabinet shop. It drills the holes every 32 mm for the adjustable shelf pins in the cabinet side pieces. I chose this option over purchasing a multi-head boring machine that requires 11 drill bits - Left & Right hand twist - that also requires a lot of strength to plunge that many drill bits into the wood to be drilled.

Fun and Functional Laser Build

Sep 12, 2016
Category
Laser Cutter Builds
Build Progress
Build in Progress...

A very fun and fulfilling build. I can't say enough about the whole Open Builds site and Open Source movement. I strongly believe this is the fastest and most creative way of getting ideas out of the mind, and onto the floor.

C-Beam Big Mouth

Jun 27, 2016
Category
CNC ROUTER BUILDS
Build Progress
Build in Progress...

My first build was with the basic C-Beam Build. I soon found the z clearance a little constricting So I added 2 500 mm actuators to support the x axis rail . I also left off the front and back y axis support rails for easy cleaning. I mounted the base of the machine to 1/2" mdf with 10/32 screws and blind nuts.

CO2 laser cutter

Aug 16, 2016
Category
Laser Cutter Builds
Build Progress
Build in Progress...

A build which is based on a metal frame and aluminium plate which I salvaged from a skip. The frame is sized to hold 19" rack units so I'll build my control box into a 3U rack unit (also salvaged). The area available for the build is 700x1200mm. I'll sling a 60W CO2 tube under the base, the beam path will be initially upward into the enclosure.

C-Beam Prototype

Jul 15, 2016
Category
Cartesian Style CNC
Build Progress
Build in Progress...

This is a variant of a typical OX (Mark Carew inspiration) router using C-Beams/8mm Acme rods to drive all three axis. I went with a 1000mm x 1000mm frame size. Useable space is 28" (711mm) X 26" (660mm) with a Z axis work travel of approx. 3.25" (82.5mm). A TinyG is used as a controller along with Fusion 360/Chilipper as the software for generating and running gcode files.

Expanded Routy using 290 build instructions

Apr 6, 2016
Category
CNC ROUTER BUILDS
Build Progress
Build in Progress...

Using the Routy290 build and an awful lot of help from puntoMX, this machine has been expanded in the X and Y axis. My first build, I'm learning a lot about all of this. I've had to disassemble parts of this thing many times due to forgetfulness, but that's ok. Also, I've forgotten to take constant pictures throughout the build.

CO2 laser.

Jul 10, 2014
Category
LASER - PLASMA BUILDS
Build Progress
Build in Progress...

Here it is my intention to show what was involved in adding a CO2 laser to my existing CNC machine.

RONIN OX | The G10/Carbon Fiber Hogger

Nov 19, 2015
Category
Cartesian Style CNC
Build Progress
Build Complete!

The Ronin OX is a dedicated fiber composite milling machine. I give a complete in-depth article on how to take a nearly stock OX build and easily turn it into something that can mill carbon fiber and G10 plate effectively and quickly.

McRouter 3 Axis CNC

Jul 9, 2015
Category
Cartesian Style CNC
Build Progress
Build in Progress...

I wanted to put together a medium size router using PTFE slides from McMaster-Carr. I've had great experience with these slides in long term continuous motion operations in industrial environments.

COTSPnP

May 1, 2015
Category
Everything Else
Build Progress
Build in Progress...

The COTSPnP pick-and-place machine (PnP) is used to place surface-mount devices (SMDs) onto a printed circuit board and was designed and built exclusively from off-the-shelf (COTS) components, predominantly sourced from OpenBuilds and Actobotics. Its intended use is prototyping and not high rate, high volume production and is capable of precisely placing parts as small as 0402 capacitors and resistors but more importantly, can precisely place components with lead spacing as small a 0.4mm.

Loading...
Loading Build images...
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice