Welcome to Our Community

Some features disabled for guests. Register Today.

Build List

OpenBuilds ACRO System

Aug 20, 2024
Category
DRAWBOT/ARTBOT
Build Progress
Build Complete!

The OpenBuilds ACRO System was developed to be the most accurate and cost effective positioning system in its class. The ACRO System incorporates the OpenBuilds V-Slot system and, therefore, has the unique ability to expand to multiple sizes creating a size configuration custom to your needs. Choose the size that best fits your workshop. This versatile system allows for precise positioning of many different mountable tools and attachments.

A simple XY laser engraver/cutter

May 31, 2018
Category
Laser Cutter Builds
Build Progress
Build Complete!

A simple low-cost XY plane laser engraver/cutter inspired by the Much 4 laser build, with minimal parts and assembly time. Uses standard off the shelf components in almost 90% of the build with the exception of the axes motor and wheel mounts which need to be 3D printed.

3D printed Laser Engraver

May 8, 2019
Category
Laser Cutter Builds
Build Progress
Build Complete!

i´ve designing this laser taking care of every part to be functional, This laser has Endstops mounts on the corners and the X axis both sides too. The corners has fasbelt tension knobs for easy operation. The laser mount has adjustable knob to manually rise or down the laser for focusing purpose. all the parts have been printed at 65% infill a 2 perimeter lines just to make the parts stronger. Attached you will find a part list with quantity and link where to buy. SIZE 1mts x 75cm Built area

Modular DIY CNC Machine

Jan 21, 2018
Category
Cartesian Style CNC
Build Progress
Build Complete!

This modular CNC machine is based on the OpenBuilds ACRO System, however I wanted something that did more than just laser engrave. So I designed my machine using the same style as the ACRO but with some upgrades such as an actual Z-axis and the ability for multiple tool attachments.

LS-LASER

Oct 3, 2018
Category
Laser Cutter Builds
Build Progress
Build Complete!

I have completed some custom build 3d printers (i3 and delta style) and a cnc mill based on v-slot and c-beam. From the beginning the cnc was built to fit/change between router, 5w led laser module and plotter pen. While all three works great, the build is primarily focused on heavy duty milling and brings some disadvantages when it comes to laser - slow because of leadscrew motion system and not as powerful because of “only” led laser. That is why I have started this build of co2 laser machine.

45W CO2 Laser Build

Jun 10, 2021
Category
Laser Cutter Builds
Build Progress
Build Complete!

A co2 laser build that is heavily inspired and based quite a bit off Pedro Fernandez' 50w co2 laser build. This is my first build post so, bare with me.

Beamlazer Laser cutter CO2 100W

Jan 4, 2020
Category
Laser Cutter Builds
Build Progress
Build in Progress...

Hi everyone, im new to the world of lasercutters but i have been granted access for a Trotec laser for a while with old firmware and only compability trought Windows XP. Then i decided to build my own laser, with some easier workflow and support for Windows 10. Since im still a student i have limited resources, so i will try too use scrap parts as much as possible. I will publish photos and updates during my build continously. Gladly taking advices from others.

cnc plasma table

Apr 5, 2015
Category
OTHER BUILDS/PROJECTS
Build Progress
Build in Progress...

ive got most of the wire harness made up too im using Chinese electronics for now I will upgrade later when this thing makes me some cash lol im using a ibm think center to case to hold my electronics ive got a 25' parallel cable to put some distance between the table and the computer

CO2 laser

Sep 10, 2016
Category
Laser Cutter Builds
Build Progress
Build in Progress...

http://www.buildlog.net/sm_laser/drawings.html using this as a baseline.... Going to try and use all or most off the shelf parts.

Fun and Functional Laser Build

Sep 12, 2016
Category
Laser Cutter Builds
Build Progress
Build in Progress...

A very fun and fulfilling build. I can't say enough about the whole Open Builds site and Open Source movement. I strongly believe this is the fastest and most creative way of getting ideas out of the mind, and onto the floor.

core xy smoothie

Oct 14, 2015
Category
LASER - PLASMA BUILDS
Build Progress
Build in Progress...

i had som left over parts and i dit like to test the corexy control so this is wat i came up with. sorry bad englich.

Rotary Axis for Laser Engraver/Cutter

Oct 9, 2019
Category
Laser Cutter Builds
Build Progress
Build Complete!

This is a fully adjustable, low profile rotary axis for your Laser Cutter. Many OpenBuilds components are used, plus a handful of 3D printed parts.

Rezo 1390 100W CO2 Laser

Jul 26, 2023
Category
Laser Cutter Builds
Build Progress
Build Complete!

This laser is a beast. Designed by Jonathan Frost, and built with 45x45mm aluminum for ultimate rigidity. It has a 4'x3' bed with a pass through that can be utilized to cut full 8x4' sheets of plywood, and has a motorized bed. Rēzo is not only faster and more capable than lasers like Thunder Lasers Nova 51 and Aeon Nova 10, but the final build costs are 40-60% less than said commercially available machines. Plans can be found at https://rezo1390.bigcartel.com/product/rezo-1390-plans

20x24 inch Fixed Gantry Mill

Mar 25, 2018
Category
CNC ROUTER BUILDS
Build Progress
Build Complete!

I have shared many pictures of this project it is now complete I have had my first cuts on this machine and it is solid , still learning the new motion Controller. The Acorn is more like you would find on a commercial built CNC or CNC Lathe.But it does have all of the functionally one needs

Modified LEAD machine

Sep 27, 2019
Category
OTHER BUILDS/PROJECTS
Build Progress
Build in Progress...

At the moment this build is in progress, I will be updating the files as I finish the remainder of the machine. This machine is intended to be a multipurpose CNC, but a bit bigger than a desktop unit. The machine is scalable in the X and Y axis.

One more life for a cube

Feb 4, 2018
Category
CNC ROUTER BUILDS
Build Progress
Build in Progress...

Modify a Gen1 Cube printer into a small cnc router to cut pcbs and light (VERY light) milling work. Also easy to swap out the rotary head and mount a laser head for engraving.

Loading...
Loading Build images...
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice