Build List
-
Active Filters:
o
Build Author Fábio Pires Views 6183
Frezar - Desktop CNC
This is a small desktop CNC inspired by the Mini OX project. It's designed with the nema 17 motors in mind. It's a 650mm x 500mm machine that it will be used to mill cast acrlic.
HardKnot OX 4x4
I've been working on commercial woodworking CNC's for year's under shop owner's that didn't want me to progress any further at a certain point. This is a project I've wanting to build for about 10 years now. I can't wait for the freedom to build what I know is possible without any negative input.
Build Author Hytech2k Views 6177
Micro Ox 2 x 2
Micro Ox Build
Build Author Sonny Lowe Views 6162
The MakerSL Customized OB Minimill
This is my interpretation of the OB Minimill, what I've changed so far, and what may continue to change as my requirements change.
Modified OX CNC Router (1000x750 mm)
An OX Router I'd like to modify to improve the frame rigidity and resolve some alignment problems
OX based lead screw Machine
Initial design for my CNC mill\router based around C beams
C-Beam Sphinx Vacuum
A modified 1000x1000 Sphinx, with a built in vaccum table.
Build Author andrizzle Views 6109
Printer1
Open source 3D printer with very powerful heated bed and light weight x axis design. Full source repository can be found here: https://github.com/a-drizzle/Printer1
My Shapeoko Router build
I built this as it is a small portable design.
Build Author Bruce Walker Views 6076
BD's Burn Box - ACRO Laser Engraver System
Two plus years in the making, I finally have a working ACRO 510 laser engraver system complete with enclosure and air filtration.
Build Author ChrisViral Views 6066
OP C-Beam Machine XL by ChrisViral
Video diary C-Beam XL build with massive steppers and a 1.5kW Chinese spindle.
Aluminium Router From Dubai
Another modification on the OX
OB Lead 1515 CNC Router 2021
Building the OB Lead 1515 was straight forward. The on-line OpenBuilds assembly videos were extremely clear and easy to follow. Initial build of this machine is with OpenBuilds BlackBox which simplified getting the electronics to work the first time. OpenBuilds staff are friendly and helpful.
Build Author Vunnie Views 6000
Workbee CNC on steroids
My First major improvement was changing the controller to a Acorn board. I loved the way a dedicated userinterface was speeding up my workflow. Next project my Y Axis. On Aliexpress I ordered a couple of 16mm ballscrews and some lineair rail. Before I took my gantry off I quickly made some aluminium profiles to fit my carriages. Withouth any doubt these improvements where worth it
C-Beam XL with Aluminum Bed
C-Beam XL with v-slot aluminum bed for fixturing.
Build Author txcomp Views 5996
WorkBee 1010 "Get Rid of the Slop" Build
My goals for this build were to eliminate slop and flex while also allowing easy serviceability.
My First CNC Machine
This will be a step by step record charting my successes and failures in my voyage of discovery while building a CNC router. Please excuse my English-English which may lose something in translation to American-English. I would be grateful for any advice during the build
Build Author Fabio Orsi Views 5988
147 RepStrap 002
This project is focused on developing a low-cost, portable and open-source FDM 3D Printer.
C-Beam-McDrew
After seeing different egg bots designs, I decided to incorporate my own design.
Ooznest build - 1500mm x 1000mm
Its the first build for me so its just the story of me attempting to build the kit and hopefully end up with something I can use. Hopefully without destroying anything or anyone.
Build Author HuguesP Views 5969
Peristaltic pumps, Automatic Cocktail mixer
This is an automatic cocktail mixer made with 8 small peristaltic pumps. this is driven with the touch screen or over wifi. the controller used is a raspberry pi with a Apache webserver
Build Author James Evanko Views 5960
Laser Displacement Golf Ball Scanner
Getting an accurate scan of a golf ball can be difficult with general-purpose 3D scanners. This purpose-built golf ball scanner uses a very accurate Keyence LK-081 laser displacement sensor with an Open Builds linear actuator for the vertical axis and a Sherline CNC rotary table for the turntable. Scan detail is determined by the sample step size and can be set arbitrarily based on desired scan time.
V-Slot Linear Actuator Bundle
v-slot linear actuator build.
YAWBM - Yet another Workbee Modification
Increase Z axis travel by 20-25mm with minimal modifications
Build Author Stokrotka74 Views 5913
Racoon CNC
This is a Sphinx variation, aimed to minimize footprint and maximize workarea. Work in progress.
Build Author Joerharris Views 5898
Joe Harris's all metal CNC Router build
I'm building a CNC router in my garage (almost finished!) and I'm keeping a video build log of the process in the hope it may be useful to others wanting to do the same. I don't have much in the way of fancy tools so expect a bit of innovation on the way!
Build Author patnap71 Views 5896
MEGADELTA, TLM CLONE with 500MM bed
All metal frame 500mm bed Delta 3D printer
Kraken Core-XY Printer
Core-XY build witha quad nozzle
Openbuilds CubeBot 3D Printer
Cartesian type 3d printer build
Build Author Zootalaws Views 5865
OXENlarged
This is a 1500 x 1500 Ox build
Zebu ( OX clone with Brasil materials)
An OX clone with alternative parts.
First Ooznest OX
The ooznest OX CNC Machine is based on the OX CNC Machine designed by Mark Carew of Openbuilds, and incorporates many upgrades from the Openbuilds community. Mark Carew based the OX on the Routy, which was in turn based on the Shapeoko
Build Author mytechno3d Views 5837
DSLR ( video ) motorized slider
In order to make some nice traveling video you need a slider .
Cnc Mill using standard and 3d printed cimponents
I used the cad designs for the c beam to find a solution to my initial sourcing problem. I figured that I could use 2x 20x20 and 1x 20x80 Profil to create a c beam actuator. I sourced all of the profiles from a local machin builder and t-nuts and screws in my local hardware store. Some parts are currently in 3d printed pla for testing reasons.
Large OX
A larger version of the OX.
Workbee Z-axis Upgrade
Z-Axis upgrade with linear rails, SFU1204 Ball Screw and full aluminium construction.
Eddie's Build of Niko's (gianakop) Egg Painter
This is my build of Niko's (gianakop) Egg Painter. Egg decorating is something many Christians do for Easter Sunday and the Easter (Paschal) Season that follows. This will be my initial use for the build, but also with minimal modification to be able to write/paint on other round objects like Christmas ornaments, coffee mugs, etc. Many people also decorate eggs for purely secular reasons.
Build Author Tommy Williamson Views 5749
Motion control camera slider based on the V-Slot® NEMA 17 Linear Actuator Bundle (Belt Driven)
I built a motion control camera slider with the V-Slot® NEMA 17 Linear Actuator Bundle (Belt Driven)
Build Author Kyo Views 5743
C-beam Delta Printer
Large scale delta robot using c-beam as the core frame component.
Build Author crystaldragon141 Views 5740
Rostock TETRA V0
This is an experiment to build a Linear Delta Printer using four towers instead of three. Primary reasons: 1. Build area is roughly cubic vs roughly cylindrical 2. Greater speed and precision from additional control provided by fourth tower. 3. Symmetric kinematics from even number of towers.
Stabilus 3d Large Format Printer Kit
Stabilus 3d Large Format Printer Kit
750x750 Plasma cutter table
It startet in May with some leftovers from a cnc router build. Now in the middle of December its 99% finish. Everything is lowcost, spend about 1600$ so far.
C beam machine (with larger T-slot platform)
Larger, more rigid build plate C beam machine
Build Author Jacob Christiansen Views 5672
ACRO 1010 with custom Z axis
This is my build for an ACRO system with a custom z-axis for changing z height for focusing or for adjusting depth when making multiple passes when cutting.
Build Author OpenBuilds Views 5665
V-Slot Ventilator
The idea is to make a simple effective ventilator, studying the concept of using a simple push process with and actuator.
Build Author dodgenet Views 5663
Budget 1500mm OpenBuilds V-Slot Deltabot Build
This 1500mm tall Delta is a work in progress. The triangle corners are water jetted from 1" 6061 Aluminum, and are welded to 1" square tubing. The 1500mm OpenBuilds 20x20 V-Slot extrusions are held into the corner brackets by two stainless steel set screws per bracket. This printer will need to be reinforced with wall brackets due to the combination of height/materials.
Build Author thehans Views 5658
Voxel OX with Helix Gear Z Transmission (single z motor)
This is a modification I made to my Voxel Ox 3D Printer Z axis, which synchronizes the Z leadscrews via a shaft and helical gear transmission. It prevents the two Z leadscrew from getting out of adjustment relative to each other, and uses a single Z motor instead of two. This build is just documenting the specific changes I have made to the Z-axis, since the frame and other axes are still from the original Voxel Ox design.
Non OX CNC Router
This CNC Router is to 95% made of standard parts and almost all of them from the http://openbuildspartstore.com/.
Mendal Max 1.5 EX2 - a part of this, a part of that.
I like this design a lot. It's very stable, very strong and with the EX2 enhancements, it prints like a champ.
C-Beam Machine upgrade to 1000mm x 1000mm
This built is to convert an existing 500x500 C-Beam Machine into 1000x1000. Inspired by several builds including C-Beam Machine : (http://www.openbuilds.com/builds/c-beam%E2%84%A2-machine-plate-maker.2020/) and Gino's build : (http://www.openbuilds.com/builds/c-beam-gtc.3250/)
Build Author Terone Burgenheim Views 5632
CoreXY - Tower Printer
I wanted to try a different way of operating the Z Axis so I setup a tower using 40x40. In the end it worked excellently and can easily print 60mm/s with 150mm/s travels. The coreXY is a very cool kinematic, and you can get some pretty great speed and accuracy. The main issue is the fact your Steps/mm are doubled, so the lower end motors don't like it at high speeds.
Build Author Ariel Yahni Views 5623
OB 2x72 Belt Grinder
Build a 2x72 Belt Grinder out of OpenBuilds V-Slots
1000mm X 1000mm with tinyg
1000mm X 1000mm overhead cnc machine
Build Author Liam Dahler Views 5602
Affordable Cartesian Printer (Initial Design)
This specific build page is a collection of screenshots sampling some of my initial SolidWorks design and pictures showing physical construction of the initial design. I will be creating individual build articles as I redesign, test, and implement new aspects of the printer.
Build Author joetemus Views 5593
Shapeoko 2 Z-Axis Upgrade
This is a major redesign to the Z-axis of an otherwise stock Shapeoko 2.
Build Author Camvec Views 5587
WorkBee CNC full kit 1500mm x 1500mm
This will be my first build ever! Looking forward to it , just gotta finish the new workshop first then I'm on it!
Build Author Hussein Dermay Views 5582
Ooznest WorkBee 1000mm x 1000mm Screw Driven
I have decided to buy and build the ooznest workbee screw driven cnc (1000x1000) and also decided to use some plates and extrusions from the ox cnc. I will never use two machines anyway and hoping to build a strong base for the workbee.
Workbee 1000x1000 mm screw driven Full Kit From Ooznest
A short summary of my Workbee CNC Build. I try to update it where I can
Workbee CNC 1500
Trying to build a machine of atleast 4x4ft working area. Work is in progress, hope to finish it soon
Build Author rkugler Views 5560
Miter Saw Stop Block
Just starting a miter saw stop system. Any suggestions appreciated.
Vacuum laser table
Large 10’x6’ vacuum table made from steel tubing and 1/4 inch steel plate
Z Axis for ACRO
Created a small Z axis for the ACRO motion system. I wanted to more easily adjust the height of the laser to accommodate various thicknesses of material, without having to manually loosen screws to adjust. Also wanted to be able to vary the height for multiple cutting passes on some materials. Try to stick to a similar aesthetic as the original ACRO system and plates.
Build Author Sonny Lowe Views 5552
MakerSL MSL-65 Manual Coffee Grinder Stand
I know this build is a little off category here at OB, but I wanted to share it with the community (as well as other coffee lovers) and show however vast the possibilities are when OB hardware is involved. This is a powered stand intended to operate a manual coffee grinder. It is compact, light, portable and uses simple drive components (B&D Cordless Screwdriver). I will post two version, V-1 (Beginner skill level ) and V-2 (Intermediate skill level). Both accomplish the same results.
TAZ C-Beam CnC Router by RC-CnC
C-Beam inspired CnC Router (1000x750) Approx 90mm of Z travel
Build Author Martin.Barfoed Views 5541
40x40 V-Slot Rod Type Linear Actuator
A Rod-type Linear Actuator based on the 40x40 V-slot profile
My first build: a other OX CNC
I love to build things. I decided to build a CNC machine to help me build more things! I had a lot of fun and I learn a lot of thing in the process of building this machine. p.s. my primary language is french not english. Forgive me if I made some mistake.
Home made CNC Plasma Cutter
Not completed yet but it does work, I will be changing small things as I finish the build and I have learned a lot from this build I am looking forward to finishing this one and Building another maybe larger table.
Build Author Connor Mckeown Views 5512
My Prusa Build
The process from my bought printer, to a custom home built machine
Build Author Corey Corbin Views 5508
Ball Screw Carrier.
Create a ball screw carrier with out BF BK bearing blocks.
Another Sphinx - 1000mm x 750mm
The reason for building this CNC is to help me in my guitar building hobby. (telecasters)
Build Author Dave420 Views 5470
Dave's Z axis and powder coated.
I just did my first Powder coat paint job on a Z Axis with 9inchs of travel for the DIY CNC Plasma Cutter, Mill Head, Router, Engraver, Laser Head, Water Jet Cutter Machine. 2 different Z Axis ride plates and a 80mm Router/Mill Head/Spindle clamp. Baked on finish in a old oven i had.
Build Author Blyn3D Views 5455
Fourth Axis Mill Prototype
I really like the 4th axis I purchased a few years back, but when I went looking for it again the suppliers who once carried it no longer do. Anyone know who makes it? Center hole receives collets. I own a ShopSmith so I am using a 5/8th rod and can mount it's chucks onto this machine. Also I like the use of the skateboard wheels, they are adjustable and one could use more sets over a longer axis. The Sherline z-axis is not my first choice, I just had a spare.
Build Author TurfnSurf Views 5448
3-Axis Plywood CNC
Theoretical Working area: 38" x 24" x 6" Actual Working Area: 31" x 23.6" x 4" Positioning Accuracy: about 0.01mm
Build Author Karan Singh Sisodia Views 5436
My Home made CNC
Home Made CNC Router from Scrape
Corexy laser
I have tested my Opt Lasers laser module on a "open" frame for some time. Decided that I want to test a corexy setup and combine it with a boxed/enclosed design - my goal is to get high precision + a safe setup with protection from the laser light + a fan to extract the smoke/exhaust..
Build Author Gary Bonard Views 5382
OxZilla
This is my second Ox with a working area of 14" x 14" x 5" I wanted to build a small sturdy potable CNC router and this OxZilla has the nice upgrades !
Build Author cbordeleau Views 5370
Slider Levelling Platform
3d printed V-Slot Gantry Plate leveler.
The MULE (an OX inspired 3-axis CNC)
The Mule is a 3-axis CNC inspired by the OX CNC by Mark Carew. This machine borrows the OX's sturdy frame and upgrades the X and Y linear actuators through the use of three 500mm lead screws (as opposed to the belt system of the OX). The result is an inexpensive, sturdy, and powerful design built for cutting tough materials such as aluminum.
My build
I am satisfied with my build and next one will be even better.
KerryH's OX
My adventure in CNC routing.
Router / Plasma Prototype Build
this is my first attempt at a CNC Table
Build Author DaveStewart Views 5339
Small C-Beam Plate Maker With Remote Login & Operation
C-Beam Plate cutter with Raspberry Pi V3, Arduino Mega2560 and Camera. Remote login & operation via SSH with cnc.js server, mjpg server on the Pi.
Lead CNC build, Mansfield, Texas - BUILD COMPLETED WITH REVIEW OF THE KIT
The machine is a stock Lead CNC, with the Black Box controller and StepperOnline 269oz NEMA 23 motors. I'll be using the DeWalt 611 from Openbuilds, as well.
Silverchris's Laser Cutter
Work in Progress of a laser cutter design. Based on the CoreXY build from https://makerstore.com.au
Controlbox for a CNC Router
A Controlbox for my CNC-Router, containing stepper-drivers, Planet-CNC MK3 Controller and a Controlpanel with joysticks.
Build Author inhan Views 5316
openbuilds rovo 1000mmx1000mm(rovo x)(korea)
Open build rovo 1000mm * 1000mm. (Rovo x ver) 20.06.2015 now in progress. rovo kit is the 10th product. 8th rovo 750,9 th rovo1000, 10th rovo x ver progress at the same time. 10th item is an aspect of 1000. It changes the size and z-axis has been up.
Dust Boot and Holddown in one
only 2 screws to hold down even bent sheet material and vaccum dust removal in one
Double trolley X and Z belt training
Total belt drive GT2
Build Author pek Views 5310
V-Slot Hand Cutting Jig
To help cutting v-slots with hand saw
Build Author Mark Carew Views 5293
OpenCase Mounting Kit
The OpenCase Mounting Kit makes wire management quick and easy!
Custom Ox
Custom black and red Big Ox
Build Author msdosfx Views 5284
Workbee 1510 Screw Driven
Workbee 1510 screw driven build by MsDosFX.
V-Slot 2020 EggBot
To build a simple EggBot
Build Author John Bolduc Views 5228
SG Duet Delta
This my version of a large no corners cut Delta.
Build Author Shaun Weitzel Views 5226
OpenBuilds Lead 1515
First build of a Lead 1515!
Build Author Sonny Lowe Views 5223
MakerSL MSL-7 Laser Cut Tape Dispenser
An easy simple Tape Dispenser, spawned out of necessity, and shared for the fun of it...
1250x1000 Build
A new design of my based on a couple different machines I have seen both on openbuilds and youtube. In the end will have a and X/Y workspace of 1250mm x 1000mm and a Z axis range of about 200mm.
Build Author JerwanDavis Views 5185
Coined by my family as the: Davomatic
Build Notes: Here are all the parts necessary to re-produce this design. Please note, all of the parts are either sourced through openbuilds or have been selected and printed from thingiverse.
1200X600 SPHINX
Need cnc to make alumunium sign, brass stamp, etc