CNC ROUTER BUILDS
C_Beam X5L Hybrid_Tank
classic router with a ab table
My Second CNC
In short...this was a fun project.
My first OX build
This is the story of my experience building a 1000 x 750mm OOZNest OX CNC router
Build Author Weldsmith Views 6951
CUT SMITH
I am building a multi tool CNC. I plan to have a quick change tooling system that will accept Routers, oxy acetylene torch, Plasma torch. etc. there will be a water bed under the convertible router table / work bench. The inspiration to build this machine is from having a small garage and not a shop.
New Custom CNC with C-Beam Rails
Hello all, wanted to share my custom build that I planed to do. My idea was to drill foam blocks to make molds for my projects. The CNC will be 1500-1500mm with a higher Z-Axis. So I redesigned the Gantry Plates that will be cut out at some other place. I hope you can share your opinion on my project.
C-BEAM 1K
The new C-Beam kit expanded to 1000mm . extra support built in for the extents of the travel.
k nest
This Build Is Is Inspired By OOZ Nest CNC, But With Some Changes,
My Little OX
This build has been an educational experience. Software and hardware alike.
Build Author Quentin Karmark Views 6877
Laguna Swift 4X4 CNC mill retrofitted with OpenBuilds
Used Laguna Swift 4X4 CNC mill with Water-cooled Spindle and RichAuto serial pendant retrofitted with OpenBuilds/Blackbox/Interface
CoreXY Tower
CoreXY Table with Symmetric Lead Screw Z axis, Build volume: 293mm x 290.75mm x 223.83mm
Ooznest OX CNC for Architecture Modell
While i achieved the desired taler Z axis this was very notable of the cost of the stiffness of the Y axis - the Y axis is now quite wobbly. i do not recommend such a big Z axis on a OX CNC machine where the requirement is a good precision.
Square OX
Square shaped OX for doing general purpose engraving and cutting into wood, acrylic, and aluminum.
Heavy duty C Beam
a 1000mm x 1500mm CBeam build with hgr20 hiwin rails 600w er16 spindle
C-Beam Plate Machine
My first openbuilds submission, plain old c-beam machine. Seems like I've spent more time fighting the forum here redirecting in circles than actually building the machine. I'll try to add more pics if I ever find a path out of this corn maze...
Build Author Lindsey Lewis Views 6815
CNC Mini Mill Build
CNC Mini Mill build with some mods after following standard build on Youtube video.
Portable Sphinx 1050
Sphinx 1050 kit mounted to a Husky 46" x 24.5" mobile workbench.
Arctic_Stingray CNC
This build is based on the C-Beam build by Mark Carew. I have added axis limit switches and a remote mounted control cabinet. This build also uses a custom moveable table.
Brokkr CNC 2.0
1M C-beam xy variant
Build Author Jay Almers Views 6703
FlashPoint CNC v1: 500mm x 1000mm 3-Axis CNC Router
My build is based on many different builds but pieced together into a unit specifically to suit my needs. The footprint, without motors, is around 500mm x 1000mm with a gantry height of around 250mm. I used a combination of C-Beam, for the linear transmission, and V-Slot for the base and gantry supports. Forged angle connectors were used for attachment and I utilized the C-Beam gantry cart kits with anti-backlash blocks for both Y axes, the X axis, and Z axis.
Build Author Carl Siren Views 6694
CNC-machine 650by700
A home-made CNC-machine with a 1.5 kW air cooled spindle motor suitable for milling materials such as wood, plastic and soft metals. The work table is 650 mm wide by 700 mm deep and the maximum movement is set to 560 mm for the x-axis, 480 mm for the y-axis and 105 mm for the z-axis.
OX CNC Build
OX CNC built using the kit from SMW3D with a Smoothieboard 5 and external motor drivers.
Build Author OffAxis Views 6629
OffAxis CNC 1000x1500
Cut Area: 825 x 1340. Max Cutting depth: 2 inches. Arduino based control with Nema 23 and Nema 17 drive. 8mm leadscrew and 2GT belt drive. 400W 48V quite cut spindle.
Build Author Brandon Satterfield Views 6619
SMW3D OX
The SMW3D OX, original other than a lot of learning!
Project There is No Kill Like Overkill
Very stout 2'x4' machine with a deep Z axis
1500 x 1500 mm OpenBuild CNC
1500 x 1500 mm OpenBuild CNC
CNC MILLING ROUTER
CNC MILLING ROUTER
First CNC Router
My very first CNC Router build. It's completely scratch built.
Build Author openhardwarecoza Views 6502
Pocket Ox (Sheetmetal)
Small CNC - made with some custom lasercut+bent sheetmetal parts + Openbuilds V Slot
Build Author Frank Del Favero Views 6494
Portable self-contained Lead 1010 table
I have a two car garage NOT devoted to 3d printing or CNC. I have set aside a space for my 3d printer and a place to store my portable CNC table. The reason it’s portable is so that I wheel and can use my Lead 1010 outside where it won’t make a mess in the garage. The table is self contained. It houses a vac system as well as my CNC tools and supplies.
Strong? CNC
The goal is to have a relatively strong CNC to be able to cut alu. Working space will be around 800x350x100mm.
Build Author tmadrms Views 6455
C-Beam Mods
C-beam machine mods.
Soundproof case for Ox
Not much to say... Soundproofing box for noisy works... Build in MDF and 20 mm plexiglas. Very effective!!!
The BEE and ME
I have always wanted to work with CNC machinery...a few years back I got my chance to learn some basics at the Double Glazing Company where I was employed (very basic I might add) before the firm folded and I was made redundant...I wanted to continue learning and when I came across this site which push affordable machines I thought I'd give it a go. So I purchased a !000mmx750mm Screw Driven Workbee from Ooznest and I'm about to embark on my quest as many have done before me...Wish me Luck!
Lead 1010 First time build
First time build of the Lead 1010 CNC with the High Z add on.
Build Author Matt Barile Views 6390
Fixed Gantry Welded Steel Router
Fully welded, fixed gantry CNC router, with chinese linear motion parts, in progress
Builder Bob's CNC
Here is the consolidation of my woodworking shop, a CNC Router!
Build Author Wes Dwight Views 6349
Modified Sphinx 55 with MGN12 linear rails
Inspired by previous Sphinx builds by Sorin (w/ MGN Rails) and Kenneth's witthuhnCNC XKLBR-1S. I wanted to create a desktop unit that kept a minimal profile and neatly contained the PS, Controller, and all wiring, making it a singular unit that could be easily transportable (as it will be doing double duty at my home and at work)
Build Author Vin1027 Views 6311
C-Beam Sphinx
This is the original C-Beam Sphinx with the 16 wheel X gantry plates. I'm using the Ethernet Smoothstepper, Gecko G540 stepper driver and Mach 4 for motion control.
Birdie CNC
OpenBuilds CNC 500x500
Small Red OX
A small router for thin plate stock
MakerSL MSL-21 OB Minimill Enclosure
Simple enclosure for the OB Minimill
Build Author TurfnSurf Views 6228
DIY C-Beam CNC
Theoretical Working Area: 360x360x75mm Actual Working Area: 300x300x75mm Will Update Later
Meister-CNC
This is a cnc router with 3 axis and a kress 1050 motor. Its 140x120cm and a homebuild with your help!
eeYZee Router
The first criteria was portability, the second was cutting out a sheet of ply, the third was the ability to shape a foam surfboard blank, but the main criteria was a small budget.
Build Author Fábio Pires Views 6183
Frezar - Desktop CNC
This is a small desktop CNC inspired by the Mini OX project. It's designed with the nema 17 motors in mind. It's a 650mm x 500mm machine that it will be used to mill cast acrlic.
HardKnot OX 4x4
I've been working on commercial woodworking CNC's for year's under shop owner's that didn't want me to progress any further at a certain point. This is a project I've wanting to build for about 10 years now. I can't wait for the freedom to build what I know is possible without any negative input.
Build Author Hytech2k Views 6177
Micro Ox 2 x 2
Micro Ox Build
Build Author Sonny Lowe Views 6162
The MakerSL Customized OB Minimill
This is my interpretation of the OB Minimill, what I've changed so far, and what may continue to change as my requirements change.
Modified OX CNC Router (1000x750 mm)
An OX Router I'd like to modify to improve the frame rigidity and resolve some alignment problems
OX based lead screw Machine
Initial design for my CNC mill\router based around C beams
C-Beam Sphinx Vacuum
A modified 1000x1000 Sphinx, with a built in vaccum table.
My Shapeoko Router build
I built this as it is a small portable design.
Build Author ChrisViral Views 6066
OP C-Beam Machine XL by ChrisViral
Video diary C-Beam XL build with massive steppers and a 1.5kW Chinese spindle.
Aluminium Router From Dubai
Another modification on the OX
OB Lead 1515 CNC Router 2021
Building the OB Lead 1515 was straight forward. The on-line OpenBuilds assembly videos were extremely clear and easy to follow. Initial build of this machine is with OpenBuilds BlackBox which simplified getting the electronics to work the first time. OpenBuilds staff are friendly and helpful.
Build Author Vunnie Views 6000
Workbee CNC on steroids
My First major improvement was changing the controller to a Acorn board. I loved the way a dedicated userinterface was speeding up my workflow. Next project my Y Axis. On Aliexpress I ordered a couple of 16mm ballscrews and some lineair rail. Before I took my gantry off I quickly made some aluminium profiles to fit my carriages. Withouth any doubt these improvements where worth it
C-Beam XL with Aluminum Bed
C-Beam XL with v-slot aluminum bed for fixturing.
Build Author txcomp Views 5994
WorkBee 1010 "Get Rid of the Slop" Build
My goals for this build were to eliminate slop and flex while also allowing easy serviceability.
My First CNC Machine
This will be a step by step record charting my successes and failures in my voyage of discovery while building a CNC router. Please excuse my English-English which may lose something in translation to American-English. I would be grateful for any advice during the build
Yet another 1x1 Sphinx
Build a 1x1 Sphinx/Sphinx XL style CNC.
Ooznest build - 1500mm x 1000mm
Its the first build for me so its just the story of me attempting to build the kit and hopefully end up with something I can use. Hopefully without destroying anything or anyone.
Yamm (Yet another MiniMill)
First time CNC user having a good time with a MiniMill
YAWBM - Yet another Workbee Modification
Increase Z axis travel by 20-25mm with minimal modifications
C-Beam Machine Build
This is my first CNC router build. I want to gain basic CNC building experience so I can go on to build other items such as a frosting or pancake printer.
Build Author Stokrotka74 Views 5912
Racoon CNC
This is a Sphinx variation, aimed to minimize footprint and maximize workarea. Work in progress.
Build Author Joerharris Views 5898
Joe Harris's all metal CNC Router build
I'm building a CNC router in my garage (almost finished!) and I'm keeping a video build log of the process in the hope it may be useful to others wanting to do the same. I don't have much in the way of fancy tools so expect a bit of innovation on the way!
Build Author Zootalaws Views 5865
OXENlarged
This is a 1500 x 1500 Ox build
Zebu ( OX clone with Brasil materials)
An OX clone with alternative parts.
First Ooznest OX
The ooznest OX CNC Machine is based on the OX CNC Machine designed by Mark Carew of Openbuilds, and incorporates many upgrades from the Openbuilds community. Mark Carew based the OX on the Routy, which was in turn based on the Shapeoko
Cnc Mill using standard and 3d printed cimponents
I used the cad designs for the c beam to find a solution to my initial sourcing problem. I figured that I could use 2x 20x20 and 1x 20x80 Profil to create a c beam actuator. I sourced all of the profiles from a local machin builder and t-nuts and screws in my local hardware store. Some parts are currently in 3d printed pla for testing reasons.
KillerBee 1515 customized
Killerbee 1515 with modifications.
Large OX
A larger version of the OX.
Workbee Z-axis Upgrade
Z-Axis upgrade with linear rails, SFU1204 Ball Screw and full aluminium construction.
C beam machine (with larger T-slot platform)
Larger, more rigid build plate C beam machine
Non OX CNC Router
This CNC Router is to 95% made of standard parts and almost all of them from the http://openbuildspartstore.com/.
C-Beam Machine upgrade to 1000mm x 1000mm
This built is to convert an existing 500x500 C-Beam Machine into 1000x1000. Inspired by several builds including C-Beam Machine : (http://www.openbuilds.com/builds/c-beam%E2%84%A2-machine-plate-maker.2020/) and Gino's build : (http://www.openbuilds.com/builds/c-beam-gtc.3250/)
Joe's Minimill Build
I put this together to cut aluminum. Chips get everywhere! Cover your lead screws. Put the mill inside an enclosure. DON'T mount electronics (especially the power supply) inside the enclosure, chips will get into it and short it out. Remove the manual jog wheels, they contribute to chatter (something about having a mass on the end of the lead screw causes vibration). I cut at 14000 RPM, 0.05 inch width of cut, 0.05 inch depth of cut, 30 inches per minute and just barely avoid chatter.
1000mm X 1000mm with tinyg
1000mm X 1000mm overhead cnc machine
Build Author joetemus Views 5593
Shapeoko 2 Z-Axis Upgrade
This is a major redesign to the Z-axis of an otherwise stock Shapeoko 2.
Build Author Camvec Views 5587
WorkBee CNC full kit 1500mm x 1500mm
This will be my first build ever! Looking forward to it , just gotta finish the new workshop first then I'm on it!
Build Author Hussein Dermay Views 5582
Ooznest WorkBee 1000mm x 1000mm Screw Driven
I have decided to buy and build the ooznest workbee screw driven cnc (1000x1000) and also decided to use some plates and extrusions from the ox cnc. I will never use two machines anyway and hoping to build a strong base for the workbee.
Workbee 1000x1000 mm screw driven Full Kit From Ooznest
A short summary of my Workbee CNC Build. I try to update it where I can
Workbee CNC 1500
Trying to build a machine of atleast 4x4ft working area. Work is in progress, hope to finish it soon
TAZ C-Beam CnC Router by RC-CnC
C-Beam inspired CnC Router (1000x750) Approx 90mm of Z travel
My first build: a other OX CNC
I love to build things. I decided to build a CNC machine to help me build more things! I had a lot of fun and I learn a lot of thing in the process of building this machine. p.s. my primary language is french not english. Forgive me if I made some mistake.
Build Author Corey Corbin Views 5507
Ball Screw Carrier.
Create a ball screw carrier with out BF BK bearing blocks.
Another Sphinx - 1000mm x 750mm
The reason for building this CNC is to help me in my guitar building hobby. (telecasters)
Homemade CNC
This started as an attempt to learn to weld and quickly took on a life of its own.
Build Author Dave420 Views 5470
Dave's Z axis and powder coated.
I just did my first Powder coat paint job on a Z Axis with 9inchs of travel for the DIY CNC Plasma Cutter, Mill Head, Router, Engraver, Laser Head, Water Jet Cutter Machine. 2 different Z Axis ride plates and a 80mm Router/Mill Head/Spindle clamp. Baked on finish in a old oven i had.
Build Author TurfnSurf Views 5447
3-Axis Plywood CNC
Theoretical Working area: 38" x 24" x 6" Actual Working Area: 31" x 23.6" x 4" Positioning Accuracy: about 0.01mm
Build Author Karan Singh Sisodia Views 5436
My Home made CNC
Home Made CNC Router from Scrape
Build Author Gary Bonard Views 5382
OxZilla
This is my second Ox with a working area of 14" x 14" x 5" I wanted to build a small sturdy potable CNC router and this OxZilla has the nice upgrades !
The MULE (an OX inspired 3-axis CNC)
The Mule is a 3-axis CNC inspired by the OX CNC by Mark Carew. This machine borrows the OX's sturdy frame and upgrades the X and Y linear actuators through the use of three 500mm lead screws (as opposed to the belt system of the OX). The result is an inexpensive, sturdy, and powerful design built for cutting tough materials such as aluminum.
My build
I am satisfied with my build and next one will be even better.
KerryH's OX
My adventure in CNC routing.
Gigantesque CNC
This is a upgrade to make a little deeper and a little bigger foot print for cutting. This is a copy of design off Rob Taylor idea for Dbl C Beam setup. The goal though is to design it around a new build with minimal tools for some one with no cnc access. Drillpress and drill bits and tap set. A 10in Non ferrous metal cutting blade for my table saw. Paper printer for printing DXF files.
Router / Plasma Prototype Build
this is my first attempt at a CNC Table
Build Author DaveStewart Views 5339
Small C-Beam Plate Maker With Remote Login & Operation
C-Beam Plate cutter with Raspberry Pi V3, Arduino Mega2560 and Camera. Remote login & operation via SSH with cnc.js server, mjpg server on the Pi.
Lead CNC build, Mansfield, Texas - BUILD COMPLETED WITH REVIEW OF THE KIT
The machine is a stock Lead CNC, with the Black Box controller and StepperOnline 269oz NEMA 23 motors. I'll be using the DeWalt 611 from Openbuilds, as well.
Build Author inhan Views 5316
openbuilds rovo 1000mmx1000mm(rovo x)(korea)
Open build rovo 1000mm * 1000mm. (Rovo x ver) 20.06.2015 now in progress. rovo kit is the 10th product. 8th rovo 750,9 th rovo1000, 10th rovo x ver progress at the same time. 10th item is an aspect of 1000. It changes the size and z-axis has been up.