Welcome to Our Community

Some features disabled for guests. Register Today.

Cover for OpenBuilds ultra low profile power supply 24v 14.6A V2

Cover for OpenBuilds ultra low profile power supply 24v 14.6A

  1. Belgath

    Belgath New
    Builder

    Joined:
    Dec 8, 2014
    Messages:
    33
    Likes Received:
    3
  2. Mark Carew

    Mark Carew OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Jun 28, 2013
    Messages:
    2,759
    Likes Received:
    2,438
    I like this idea @Belgath will make the build much nicer and neater.
    Do you happen to have the other (stl) parts you could add to the resource as well as a pic of it on the unit?
    Thanks in advance
    Mark
     
  3. Belgath

    Belgath New
    Builder

    Joined:
    Dec 8, 2014
    Messages:
    33
    Likes Received:
    3
  4. Ronald van Arkel

    Staff Member Builder Resident Builder

    Joined:
    May 7, 2014
    Messages:
    472
    Likes Received:
    245
    I'm almost done with the SketchUp drawing of the PSU. I will import the STL and add it to the drawing and post it here if you would like that.

    -Ronald
     
  5. Belgath

    Belgath New
    Builder

    Joined:
    Dec 8, 2014
    Messages:
    33
    Likes Received:
    3
    Some quick pictures of the mock up.

    image.jpeg image.jpeg image.jpeg
     
    Mark Carew and Ronald van Arkel like this.
  6. Belgath

    Belgath New
    Builder

    Joined:
    Dec 8, 2014
    Messages:
    33
    Likes Received:
    3
    The SketchUp image with the STL would be great to have.
     
  7. Ronald van Arkel

    Staff Member Builder Resident Builder

    Joined:
    May 7, 2014
    Messages:
    472
    Likes Received:
    245
    How is the yellow connected named?

    Later today I will check out the file you provided to see what can be done :D, thank you.

    -Ronald
     
  8. Ronald van Arkel

    Staff Member Builder Resident Builder

    Joined:
    May 7, 2014
    Messages:
    472
    Likes Received:
    245
    Okay, imported it, looks cool:

    upload_2016-2-10_17-41-31.png
    upload_2016-2-10_17-42-53.png
    Side-holes don't align 100%, my model has the holes 151mm from each other and are not aligned with the holes on the bottom. I might pull out another PSU to see if I have one that is a bit off ;).

    Mark has to prove the model of the PSU first, then we'll add it to the resources.

    -Ronald
     
    #8 Ronald van Arkel, Feb 10, 2016
    Last edited: Feb 10, 2016
  9. Belgath

    Belgath New
    Builder

    Joined:
    Dec 8, 2014
    Messages:
    33
    Likes Received:
    3
    With my calipers I had the holes at 150mm lengthwise 50 mm apart on the width, 32.5 mm from the front edge. But I was eyeballing the center of the 4m holes.
     
  10. Belgath

    Belgath New
    Builder

    Joined:
    Dec 8, 2014
    Messages:
    33
    Likes Received:
    3
    Nice job on the model.
     
  11. Belgath

    Belgath New
    Builder

    Joined:
    Dec 8, 2014
    Messages:
    33
    Likes Received:
    3
    I will be putting a low profile version out latter this week that will sit within the frame of the power supply. This currant version, I needed room for some extra electronics. So I know won't work for a good portion of you.
     
  12. Ronald van Arkel

    Staff Member Builder Resident Builder

    Joined:
    May 7, 2014
    Messages:
    472
    Likes Received:
    245
    Okay, tossed my stupid ruler and used my caliper... it was 150mm indeed, now it looks like this:

    upload_2016-2-10_18-45-22.png

    The model was made in 2D CAD, and from there 100% with SketchUp; total work-time about 12 hours :D. Fan, pot-meter and LED are simplified versions that I found on the net

    -Ronald
     
  13. Belgath

    Belgath New
    Builder

    Joined:
    Dec 8, 2014
    Messages:
    33
    Likes Received:
    3
  14. Mark Carew

    Mark Carew OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Jun 28, 2013
    Messages:
    2,759
    Likes Received:
    2,438
    Awesome thank you @Belgath looking forward to printing this.
    Do you have a parts list where we can get all the plugs, etc.
    BTW you can add updates/changes to your resource at the top right. There is no need to make a whole new resource for each update.
    Thanks again
    Mark
     
  15. Belgath

    Belgath New
    Builder

    Joined:
    Dec 8, 2014
    Messages:
    33
    Likes Received:
    3
    That is a different resource it is a entirely different cover designed to protect just electrical connections and sit under the build plate so there is no place added for connectors or the switch. Unless I am misunderstanding sumthing here which is very possible. Been using the Green update resource button. For this one. I'll link the parts shortly.
     
  16. Belgath

    Belgath New
    Builder

    Joined:
    Dec 8, 2014
    Messages:
    33
    Likes Received:
    3
  17. Belgath

    Belgath New
    Builder

    Joined:
    Dec 8, 2014
    Messages:
    33
    Likes Received:
    3
    Also get my wire from Hobby King it's high-quality silicon clad wire that is designed to deal with movement and heat.
     
  18. Belgath

    Belgath New
    Builder

    Joined:
    Dec 8, 2014
    Messages:
    33
    Likes Received:
    3
    If any of you have printed this out let me know how it works out for you.
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice