Welcome to Our Community

Some features disabled for guests. Register Today.

Sign Up

Chinese 3040 cnc.

Discussion in 'General Talk' started by Edong1174, Oct 7, 2022.

  1. Edong1174

    Edong1174 New
    Builder

    Joined:
    Sep 27, 2022
    Messages:
    7
    Likes Received:
    0
    Hi guys I am new to cnc and I replace my existing chinese control box that come with it when I bought the unit. with black box motion control.

    The machine movement are fine, Homing is ok. But when the machine start to run, it stop on z axiz..

    The total length of the Z axis is 100mm.
    The machine lead screw is 10mm with 12thread/inch 20221006_233709.jpg 20221006_232647.jpg 20221006_233709.jpg 20221006_232647.jpg
     
    #1 Edong1174, Oct 7, 2022
  2. Peter Van Der Walt

    Peter Van Der Walt OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Mar 1, 2017
    Messages:
    14,877
    Likes Received:
    4,285
    Post your GCODE file please
     
    #2 Peter Van Der Walt, Oct 7, 2022
  3. Edong1174

    Edong1174 New
    Builder

    Joined:
    Sep 27, 2022
    Messages:
    7
    Likes Received:
    0
    This are the machine settings.

    Walk me through if I didn't send the right info..


    Thank you

    Ed G
     

    Attached Files:

    #3 Edong1174, Oct 7, 2022
  4. Peter Van Der Walt

    Peter Van Der Walt OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Mar 1, 2017
    Messages:
    14,877
    Likes Received:
    4,285
    Attach the actual GCODE file, we want to look through and see if any moves are high

    Next up, did you check your machine is setup correctly (Jogs move per the Cartesian standard?) and that all axis were calibrated?
     
    #4 Peter Van Der Walt, Oct 7, 2022
  5. Gary Caruso

    Gary Caruso OpenBuilds Volunteer
    Staff Member Moderator Builder

    Joined:
    May 19, 2016
    Messages:
    1,193
    Likes Received:
    532
    The machine lead screw is 10mm with 12thread/inch

    Are you sure? Might need to carefully measure a full turn of the screw and see how far it travels, best to keep it all in mm for the maths.
    Cheers
    Gary
     
    #5 Gary Caruso, Oct 8, 2022
  6. Edong1174

    Edong1174 New
    Builder

    Joined:
    Sep 27, 2022
    Messages:
    7
    Likes Received:
    0
    Hi

    I hope is this it..if not please let me know where and what command to input it.

    Thank you Sir.
     

    Attached Files:

    #6 Edong1174, Oct 9, 2022
  7. Edong1174

    Edong1174 New
    Builder

    Joined:
    Sep 27, 2022
    Messages:
    7
    Likes Received:
    0
    That's the homing of the machine..

    Thank you sir.
     

    Attached Files:

    #7 Edong1174, Oct 9, 2022
  8. Alex Chambers

    Alex Chambers Master
    Moderator Builder

    Joined:
    Nov 1, 2018
    Messages:
    2,770
    Likes Received:
    1,357
    No, please upload the actual g-code file - the file you uploaded to your controller. Camera shots of a screen are really hard to read.
    Alex.
     
    #8 Alex Chambers, Oct 9, 2022
    Peter Van Der Walt likes this.
  9. Edong1174

    Edong1174 New
    Builder

    Joined:
    Sep 27, 2022
    Messages:
    7
    Likes Received:
    0
    Hi

    I finally get the proper set up please see attached video.

    The machine is working fine.


    Thank you sir.

    Sincerely yours


    Ed G
     

    Attached Files:

    #9 Edong1174, Oct 9, 2022

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Accept Learn More...
    Dismiss Notice