Welcome to Our Community

Some features disabled for guests. Register Today.

C-beam machine build video suggestion

Discussion in 'General Talk' started by Dave Parson, Nov 26, 2016.

  1. Dave Parson

    Builder

    Joined:
    Aug 30, 2016
    Messages:
    3
    Likes Received:
    2
    It would be great if some annotations could be added to the C-beam build video about having to cut the aluminum extrusions for the frame to length. Yesterday when I started my build I ran into issues with the short ~250mm ones being slightly different lengths, so this morning I fixed these with a table saw. Unfortunately tonight I ran into another issue where the 500mm ones are actually 510mm and discovered this would not work when trying to mount the X/Z gantry after completing the build of the frame. So I had to take everything apart in order to do more cuts tomorrow. So a little annotation about ensuring all the short aluminum extrusions are the same length and at least 2 of the long extrusions are the same length as the X-axis C-beam extrusion would have been a big help to a newbie like myself.
     
    Mark Carew and Rick 2.0 like this.
  2. Mark Carew

    Mark Carew OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Jun 28, 2013
    Messages:
    2,759
    Likes Received:
    2,438
    Great tip @Dave Parson thank you we will look into adding annotations for the cuts to the video.
    EDIT added, thanks
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice