Separate names with a comma.
Some features disabled for guests. Register Today.
you need something like this https://www.aliexpress.com/item/1005005709569100.html then you program the X32 with the XYZA firmware from CONTROL...
there are various keyboard macro packages that can probably do it, you will have to do the programming though. AutoHotKey is what this guy uses to...
if you watch the video I linked AND his other ones on the topic you will see that he is using a microcontroller to sense the position and control...
next to check is the 'cutter size'. ie the actual size of the kerf that is being cut and set that in the tool setup in Fusion. it uses the kerf...
you put the sensor disk on the output shaft and the electronics shoud take up the backlash to hold position, it helps if there is some preload on...
this guy has a few videos on creating your own rotary feedback which you caneasily do with an extra Uno. thus you would keep the cnc controller...
lots and lots of 0.1mm moves, would be hard for many controllers to manage the planner buffer. do you really need 0.1mm resolution?
a Nema17 motor can have many different electrical characteristics for the same size and weight of motor, so you will be able to find a physically...
ctrl+0 to reset to standard sizes, just like any web page in a browser, since the interface is actualy a web page (-:
you need to be using the Openbuilds post processor for Fusion360. It will automatically generate a gcode file per tool, since grbl does not...
with that low acceelration rate it is not going to be able to get to 3000mm/min except on quite long moves. have you done any tuning of speed and...
can the machine even do 3000mm/minute? my belt drive machine can, but few screw driven/stepper machines can. maybe the wiki has some clues, and a...
your Gcode is not good for GRBL controllers.... % O00001(ARM) ; unsupported (but may come later on the X32) ( T1 | 1/8 FLAT ENDMILL | H1 ) N100...
got a yardstick? use it (-: the longer distance for calibration the better
so long as you can hold a finger on a hot motor for 5 seconds they are not too hot
It is possible to calibrate a completely unknown system, you just have to do the cilibartion wizard several times and use a little l best...
the BB4x must be in laser mode ($32=1) the Gcode must use M4 power mode (a setting in lightburn I guess).
this video shows the drawings though I recall a video showing the mechanism but cannot find it [MEDIA]
then please follow the link I gave you to the 'fake the home' instructions and do it everytime you turn the machine on, that will solve your...
do you watch Peter Stanton? he has a video showing how his big Mazak mill/turn swaps between lathe and C axis mode. The lathe motor is belted...