Separate names with a comma.
Some features disabled for guests. Register Today.
yes and yes. Machine home or 0,0,0 is absolute, everything else is relative to it. When you use the 'setzero' buttons in the CONTROL software,...
You cannot set it yourself. GRBL, the software in the blackbox, sets it to 0,0,0 when it boots or is reset. It resets everytime something makes...
There is a macro available that changes the Z step for you... I think @sharmstr did it try here OpenBuildsHacks/Macros at main ·...
As i have mentioned before, and someone did mention it above, bCNC has a handy block 'hide' in the editor. You don't have to use bCNC for your...
Congratulations! you found an actual bug! (-: A long time ago in trying to fix arc errors 2 output formatters were created, one used for linear...
There is no Z downward command where one is expected, so the controller is doing exactly what it is told to do, goto Z5.5 and stay there for that...
could easily be the extension, they tend to be 'for charging fones' quality while being advertised as 'high speed' or similar. in all types of...
Looks like Fusion now forces an 'NCProgram' for all post operations and the display of the options has changed. Pushed a fix just now as Release...
I think the only thing I would do differently is allow for the camera lens to be mounted on the axis of rotation, so the rig is going around the...
'high torture' made me laugh (-: I would mount so Y run horizontal, so a minimum of weight has to be lifted, ie only X will be lifting.
OBCam is used by many to go from DXF to Gcode (and can draw some primitives too), Fusion360 is also used by many (with the OB postprocessor...
You have a 'didnt read the manual' problem (-: OBControl is designed to work with the Blackbox and similar controllers, like a bare Arduino Uno...
for sliding we have all the various plates that can mount V wheels that can then move along the V slot rails. Plates - V-Slot Plates - OpenBuilds...
Thing is, if you build stuff, once you have a lathe you will use it often. I certainly cannot envision life without my lathe. Used it on Sunday...
By a lathe buy tooling for it learn to use it buy more tooling (repeat these 2 lines for a while) mount the pulley accurately bore and ream to...
I think the pins 0 and 1 are the hardware serial port on the Uno, so you cannot softwareserial them, the ordinary 'Serial.println' is already...
I don't know exactly as i don't have that software. I see the tool is moving in expanding rectangles with sharp corners. Do the diagonals occur...
This is probably due to the grain in the wood interacting with the direction of cut, as well as the cut direction interacting with the backlash in...
The only correct one is OpenbuildsGRBL postprocessor (-: Linuxcc and others support Gcodes that GRBL does not support and will cause error...
Not an issue for the controller, but will certainly kill the solenoid in a relatively short time, they do have a limited life span.