Separate names with a comma.
Some features disabled for guests. Register Today.
I spent the weekend pondering running GRBL on my Mega2560. I noticed that the pinouts are on 2 separate ports, PORTA and PORTC. I also noticed...
quite interesting.... your filename on your 'D' file is very long, long enough to trigger a function to split it into smaller pieces to keep GRBL...
Hi Lew Are the files you are joining created from SketchUcam? The joiner looks for the starting line G90 G21 G49 G61 G17 (really only needs the...
I was doing some calculating yesterday. an 8mm diameter, 8mm pitch lead screw can give you some impressive resolution. here is a quick table...
Mark is working on it, and a software upgrade too.
there should be a setting for 'reverse homing direction', that is what you need. Homing and Limits Setup and Troubleshooting · synthetos/TinyG...
yes you can cut it. you may need to make a fixture to hold it you will need a long enough cutter to reach the bottom without the collet hitting...
to get easy release you need to polish the punch, I think. and maybe make it thinner so it is not expanding the material a much = less grip. but...
Hi according to this RADDS - RepRapWiki the RADDS is for 3D printers. However, you should be able to follow the connections instructions, and...
I am becoming a believer in 'always' using ramping. The few jobs I have done with it since adding it to SketchUcam have benefited, even in...
here are some ideas I found via Aunty Google http://home.earthlink.net/~anelsen/cabinet.htm http://www.woodworkforums.com/showthread.php?t=131710...
In sketchup, draw a rectangle the size of your spoil board, actually just the size of the area your router can reach otherwise you might run into...
the extension does not matter at all, what matters is the code inside the file. Gcode is a plain text format which you can edit with 'notepad'...
Have you watched Marks OX build videos? He goes through the setup in detail in the second one IIRC [MEDIA] [MEDIA] and then there is the GRBL...
how will you adjust for wear? it will wear, everything wears (-: that is the beauty of the rollers/eccentric design, you can adjust for wear.
I don't have my grbl reference handy so don't know what those numbers mean. (-: however, there is a good calibration thread at...
David the swarfer published a new build: A modified OX with more X clearance, MDF plates, vacuum table Read more about this build...
fractals are also fun R_B...
not really backwards (-: just keep in mind the X Y and Z motions refer to 'tool movement' and it makes sense.
Very nice! Boils down to knowing your tools (-: Know your hammer, you can hit anything with it, successfully. Don't know it, all you can do it...