Separate names with a comma.
Some features disabled for guests. Register Today.
I think your flutes are packing up with dust, you have to go shallower so that the chips get time to clear. 3 flute cutters are not so good for...
nice! science works, it seems (-:
according to my (simple) speed calculator you should be running that bit above 34000 rpm at 69 to 139 IPM for a ~2 thou per rev chipload. halve...
an outside cut cuts around the thing you want to keep. you want the best finish on the edge of the part you keep, right? some machines give a...
eh? you can cut either direction on outside cuts, just tick or untick the 'overhead gantry' checkbox. to quote the help: 2) "Overhead Gantry"....
Controller software like Mach3 and LinuxCNC only need a single pulse per rev from the spindle in order to synchronize threading on a lathe.
Hi Stepper motors are driven via electronic drivers that are driven by 'step' and 'direction' inputs. The direction pin is either on or off, on...
why is Z negative? negative Z is normally 'cutting into the work'! note that in SketchUcam there are settings for doing this automatically....
and how do you make the 1mm wide separator in the middle of the roller? that keeps the roller centered on the 2 bearings.
I did mine out of square 10mm stock. set up the 4 jaw, face, cut 7.15 dia portion, part off. repeat. now, make a spacer to get the required...
phlatforum.com is the official host for the software and is the only host for it. why? because keeping multiple hosts updated and in sync is a...
yeah, lots of them, all you need is money (-: however, this is free for personal use 3D CAD/CAM Software for Product Design | Fusion 360 and...
vacuum dust collector should handle it. (-:
what about a cheap airbrush spraying ethanol or methanol? the ethanol will evaporate so no cleanup. example [MEDIA]
V1.4 has been released Bug fixes Fix for Phlatten tool. Fold/centerline/pocket tool depth in VCB. The depth can now be set to floating point...
SketchUcam V1.4 has been released, get it from the official download page
have you looked at some of the NYC CNC videos on youtube? he does some nice stuff on Fusion...
also keep in mind that the bigger the motor, the lower the top rpm you can expect from it.
Hi Johan Those steppers will be fine when driving leadscrews since the leadscrews increase the force. The OX normally has a Nema17 on the Z which...