Separate names with a comma.
Some features disabled for guests. Register Today.
no, once an arc is exploded it cannot be put back together as an arc since the line segments no longer contain the radius information. but, if you...
it's easy, select a vertex on the edge of the bolt and line it up with a vertex on the edge of the hole (rather than try for centers) (-:
you say 'snap' , Sketchup says 'inference', look it up in the Sketchup help/online. Sketchup is inherently an architectural drawing tool that...
1/8 steps is probably what you want on the belts. gives a nice balance between resolution and power IMHO. however, if you can live with lower,...
this is great! now on my 'must build' list.
oh boo hoo, 2:1 huh? try 15 to 1, as in 15 Rand to 1 USD, and no, that does not mean we earn more )-: and ~R22 to 1UKP. nope, you ain't got...
an alternative to weld is the BZ Spline tools, which has a 'make polyline' function. select a segment, right click, select , select all...
well, how about Googling for the web site? the first link I see is for winder/Universal-G-Code-Sender · GitHub and you want the 1.0.9 build linked...
I would put a transistor between the tinyg and the relay. us the 'open collector' type of connection, and 5 volts supply to the transistor....
sadly, you are wrong (and right) and you are misleading newcomers. yes the rate of the step pulses determines the speed of the motor..... but...
ah yes, the old line presentation order thing..... you drew the left hand line 'going up' and the right hand line 'going down' (or down/up), and...
voltage is more important than amperage in determining speeds for stepper motors. 2A at 1volt will give you the same power as 2A at 24volt, but...
you should wire your limit switches to the 'normally closed' terminal. that way if a wire comes off the machine stops.
this is in the 'resources' but here is a direct link to it. after this one, watch my other SketchUcam videos. Some are very specific to...
well, have you got a computer with a parallel port that is a not a laptop? if so, I would use Mach3 if you can get a decent breakout board....
you had to go and choose THE hardest thing to do (-: that groove is really a 3D part, and currently the 3D module does not cut the correct size. I...
you mean a circular groove? how thick is the wall? how wide is the cutter bit? I would: (In Sketchup of course :) draw a circle for the inside...
um, tabs are not supposed to be cut, they are left behind to keep the part in place so it does not jump up and jam the cutter.
if a line intersects the purple 'here is a hole' line in the plunge hole symbol, then you will get 2 holes, because each 'begin' end of those...
and then you pulled the belts tight and they stretched, so the pitch is not precise anymore. you need to calibrate! OpenBuilds OX CNC Machine |...