Separate names with a comma.
Some features disabled for guests. Register Today.
the frame by itself is not strong enough to be moved about like this. (you can do it, but you would have to re-align it every time you want to use...
good, but then your overcut% was greater than 100%, which means it is supposed to cut through the material, but it cannot because min_z is zero....
yeah, the @ is part of a Ruby variable name that was supposed to be printing the value instead of the name (-:
BTW you should NOT be seeing (RAMP limiting Z to min_z @min_z) This means you have not set min_z and max_z correctly. on the main help page,...
to quote the help Plunge holes are automatically grouped. This prevents underlying geometry from interfering with G-code generation. Only an...
ran it in LinuxCNC and it gives a nice informative error message (-: but wait, it is actually a Sketchup anomoly resulting from the tiny...
Interesting to know. Havn't fired up the LinuxCNC box yet but will have to try it and see. The plunge hole code from SketchUcam always uses IJ...
I solved this problem by realigning the holes in the drawing and regenerating Gcode. seems the specific spacing and position of the holes creates...
the top and bottom belts must be at the same tension.
the message has nothing to do with the TB6560, and probably everything to do with XP being 'several years expired and no longer supported', and...
BTW CAMotics is very fault tolerant, in other words, it will not complain about errors in the Gcode at all >-: Maybe I should dig out my LinuxCNC...
Hi Here is the meaning of the error message Invalid GCode ID: 33 · Issue #619 · grbl/grbl · GitHub in short, GRBL doesn't think the arc starts...
to get back to your long load times...... I see that too, almost a minute to load when Sketchucam is an active plugin. but then, that drawing does...
please send me your sketchup file so I can look into this in more detail (start a private conversation if you like). oh and "why don't THEY fix...
from what you say here, I gather you are doing a full 3D drawing. This then has nothing to do with SketchUcam at all, since SketchUcam generates...
Hi in Sketchup, turn off the 'autosave on schedule' thing. Window|Preferences|General - uncheck 'autosave' I have Sketchup 7, 8, 2013, 2014,...
what size are the holes? Sketchup does internal comparisons down to 0.001". (took me ages to figure this out, and it is not documented much...
hi can you post here, (or privately to me) your 2 files, one inch and one mm, for the same cut? I am keen to have a look. (yes, I have an idea...
I see that only when the 'plate' is not flat, ie one of the corners is not in line with the other three. (for a flat drawing) select the plate and...
if you know how fast your router is going you can calculate the feed rate to match that speed. this is important because if you feed too slow the...