Separate names with a comma.
Some features disabled for guests. Register Today.
When I need a specific depth I do a two stage drawing On one copy I do the lines that need a specific depth. On another copy is all the general...
I am told that there are key combinations for HOME and END but I don't know what they are. Google for a mac specific forum to answer that, then...
They moved it to Window|Extention manager [ATTACH]
Could it be the same problem as detailed here? Power Cabristor: DRV8825 missing microsteps In my testing the 8825s and the 4988s both do this odd...
The new version of SketchUcam, V1.4c has been released. It has some new things, like complex pocketing and support for GRBLv1.1's new laser mode....
ahem, cough, 50"/min is slow (-: search youtube for 'datron cnc'. Yes, big stiff machine, but that is how fast you can cut aluminum if...
Using the kerosene is then more important as it prevents the chips sticking to the bit. why yes.... Holding parts on the CNC router For...
For cutting aluminum you MUST turn on ramping in SketchUcam. I wrote it for aluminum, just for the C-beam (-: Milling bits do not like to plunge...
looks like Y lost a lot of steps. reduce acceleration and max speed for Y ($111 and $121). half the current values should do it. if it works...
The only things you need to set on a controller are steps/mm and max feed rate/acceleration. That is all the controller needs to run the machine...
Hiya Not sure what you mean by software that 'uses' GRBL.... I will take it to mean 'software that generates GRBL friendly G-code' GRBL uses...
GRBL does not support multiple 'pens', but it does not need to. G-code supports multiple work offsets, and tool offsets, so there are two ways to...
you need to select the correct COM port and Connect to the Arduino before the panel can do anything. AND the arduino must have GRBL loaded before...
says 'error this is too big' or WARNS that it might be too big? the warning is normal and it will still work. run UGS using the batch file...
how about using the workpiece as the Y axis? so if the base is made as a triangle, drive 2 wheels on a flat edge, and spring load a wheel on the...
how about just a stock Routy ? simple and cheap.
no, 'swaged' is the word, bent to a new shape without cutting. swarf is 'metal sawdust' , I make a lot of it with my lathe (-:
no, not PWM, a 0-10v DC signal that sets the speed. you will need an interface board that takes the PWM signal from the Arduino and turns it...
You can use the calculator at GRBL settings calculator to calculate the $100-$102 values. After that you can fine tune the settings using the...