Separate names with a comma.
Some features disabled for guests. Register Today.
Since I have an USBasp I have been thinking to just burn GRBL directly without a bootloader at all.
Maybe because tinyG is not GRBL it is sending the wrong commands?
I would use the Spindle Enable pin. M3 will turn it on and M5 will turn it off. Yes you can use this even if GRBL is compiled in PWM spindle...
I think you need edit the post processor to fix this, google will find out how if you search for it. Looks like you started at the official...
LinuxCNC is a system comprising Linux operating system that has been modified to be deterministically realtime. (the realtime kernel) a...
No doubt you saw in the code that I started working on a plasma mode. I gave up when i realized I just did not know enough about plasma cutters....
Watch this guy use SketchUcam to design and cut his new CNC machine.... Atividade Maker
ugh I used to use TurboCAD, a long time ago. I found the 3D to be very hard to use. Now I do everything in Sketchup. Well, I am biased, but...
Also, on the 'tool' tab there is a 'calibrate' box, I think that is where you put in the touch plate thickness
What does TLO do ?
just googled it and read a couple of pages, then ran bCNC and nosed around. I conclude that you add the thickness of your probe plate in the...
To run the router you use an Arduino+GRBLsoftware+a driver board (or a TinyG or other controller) If you use a dedicated controller like the above...
crashed it inside a minute (-:
What Arduino boards are you using? There are some that have problems with the USB chip. from Frequently Asked Questions · grbl/grbl Wiki ·...
agree absolutely, don't do this at home folks. In my case the motor is not connected to the machine until I pick it up and engage the drive fork....
For a change, this is not a moan or complaint or question (-: Instead, I achieved something cunning and think others should have a chance to...
In the help there is a red link to the bit where it says 'what to do after install' which has a discussion on the importance of setting z_min and...
In SketchUcam you can very quickly generate a grid of holes. Hundreds at a time if you need them. The grid can be just one line of holes too,...
seems to me the microstepping setting has changed, check the jumpers for proper contact. (turn everything off first)