Separate names with a comma.
Some features disabled for guests. Register Today.
Doing this hinges on having a defined home position. This means you either have home switches OR you always turn on with the gantry in the same...
error 1 and 2 mean: 1 G-code words consist of a letter and a value. Letter was not found. 2 Numeric value format is not valid or missing an...
No. The plans are available here free but cutting the parts out and assembling are now for you to do. If you want a kit of parts to build a...
[MEDIA]
plenty of tutorials for Sketchup on youtube, and I gave the link to my tutorials for SketchUcam for generating the Gcode
get carbide for plywood, the glue will quickly blunt HSS bits.
Sketchup it is then. I say this because you can adjust the line thickness for all lines (under the styles menu) so that all lines are more than...
You have already been pointed to the Openbuilds software which is a great place to start but no-one has asked 2 vital questions, can you see well...
First Change the GRBL settings to turn off homing entirely and check that it then comes up without an alarm. Home will then be wherever you turned...
an option is to test cut on insulation foam if you don't have a simulator to check for collisions
yeah, I might use that stuff to make a relief carving my wife could paint (-: (some of your expensive wood comes from here in Africa (-: ) we have...
Well...... I havn't done any long projects but even short ones can end up surprising us. Just the other day I generated code to cut a Barbie bed...
This is a bug @Peter Van Der Walt You need to go and remap the key to 'right' instead of 'arrowright' click 'wizards and tools' click "customize...
error:9 is "G-code locked out during alarm or jog state". so why is it in an alarm state? do you have homing switches? anything changed?...
there are many solutions to the large video file situation: ffmpeg this has an option for everything so can be complicated, but the good news...
Note that having the CONTROL display inches or mm is separate from the numbers in any Gcode file. A Gcode file must always have either G21 (mm) or...
Hiya The BlackBox runs GRBL so you need a GRBL post. If there is no post labelled as such then use the one that outputs the simplest Gcode, this...
I got one of these 'missile switches'... It has 2 sides and so far I have wired one side to the power supply. The other side will eventually go...
So... anyone keen on this.....(watch the attached video) Working in Sketchup Make 2016, should work from Make 2014 onwards, sadly not in Sketchup 8
A couple of BlackBox's and OpenbuildsCONTROL will get your machines working just fine and is as simple as it gets (and cheep).