Separate names with a comma.
Some features disabled for guests. Register Today.
you can replace the belts with rack and pinion, just search these forums for details
in the postprocessor are a collection of event handlers. onRapid handles the output of rapid codes and my guess is that the internal processor...
your jumpers are correct, leave them alone. Peter is talking about wires, the wires from the drivers to the stepper motors. I am talking about...
side bet : one of those tiny stepper drivers is overheating. point fan at the drivers during a job to prove/disprove (-:
also, did you select the correct USB port from the list before you clicked connect? when my OpenbuildsCONTROL starts it shows this \[ATTACH] but...
$100 and $101 do not store 'microsteps', they store 'steps per mm', this tells the controller how to calculate how many steps to do to move a...
I say again, you need to calibrate the machine after you increase the microstepping to 8x or 16x. once the machine moves 100mm when told to move...
you need to calibrate your steps per mm values ... HOWTO Calibrate your CNC Machine for MACH3 or GRBL if you are using OpenBuildsCONTROL there is...
read this gnea/grbl then set $130 $131 $132 to the correct values In OpenBuildsCONTROL click the 'GRBL settings' tab and change the values, then...
this is perfectly normal for GRBL, just don't go to 0,0,0 (-: the exact trigger point is influenced by homing speed deceleration time...
The default settings of the Openbuilds post for Fusion360 will work just fine since they cause Z to be raised to (home minus 10mm) at begin and...
positive Z motion, whether jogged or programmed MUST be UP, negative is down into the cut. Z home is UP at the top of travel. This is an...
The Openbuilds fusion post will automatically generate a Gcode file per tool.
Uno with GRBL Marlin is designed for 3D printing and it does that very well, others things not so much
that is what I do, Arduino Uno with GRBL on it right here on my desk even though my actual machine is about 4 meters behind me (-: I also have an...
or issue $C in the serial console which puts GRBL into check mode, it will accept and 'run' all code but not actually move the machine.
fusion remembers settings for each drawing (-:
no fusion does not provide a way to hide options. Why would someone change anything? Print some check sheets of what it is supposed to look...
In the post options dialog you see entries for the 'end of job Z position' This is used for the start of the job as well so if you have home...
your bluetooth adapter is corrupting the data stream, go back to a real USB cable.