Separate names with a comma.
Some features disabled for guests. Register Today.
I believe you should increase the pulloff setting gnea/grbl
yes. Fusion360 adaptive toolpath with small retract height during those short rapids as it repositions for a cut. Z rapids up, XY moves, Z...
make sure GRBL's $30 and $31 parameters are set correctly.
my reaction is 'sticky spot'. that is what my machine did at first, Vslots and belts and I tuned X and Y to 7500mm/min but was only moving on...
Also note that in GRBL moving to X0 (or Y or Z) WILL hit the switch and cause an alarm. This is why the OpenBuilds Fusion360 post will output...
When GRBL does a homing cycle it finds the limit switches just fine and hitting them is not a fatal error 'during the homing cycle'. After that...
You need to calibrate the axes. Note there is a calibration Wizard in OpenBuildsCONTROL but do follow the link to understand how it works....
This can be caused by 2 things: 1 - You need to set the end of job Z position option for the post-processor correctly: [IMG] you need to set the...
try different cable different usb socket
maybe turn up the current on Z? and turn down the acceleration. both will make it easier for it to raise Z without missing steps.
great, been wondering where you have been hiding (-:
I think I see what is happening. The inch display has only 2 decimal digits when it should have 3 (or 4). if you do g20 g0 x10.955 you see...
I feed Kicam gerber files into pcb2gcode/pcb2gcode to generate Gcode. Works ok so far.
if a 0.01" jog does not register it means that this is a smaller step than your hardware can take. and that depends on the pitch of your...
you may want to look at GRBLHAL which can use a variety of 32bit hardware with spare timers. terjeio/grblHAL
you said it is a reflective opto sensor, does this mean it is mounted like a tool and is moving toward the workpiece? I would like to see a photo...
Z25 is a movement UP away from the work. is that what you intend? probing will usually be down toward the work (negative), and should also be a...
ALWAYS ramp into metals. just, ALWAYS (-:
That long comment is a result of the new restrictions on 'personal' fusion360 usage licenses, you shoudl have got an email from them about 3 weeks...
the big difference between the files is that the Vcarve one is FULL of M4/M5 pairs where as lightburn does not have that. The way that GRBL...