Separate names with a comma.
Some features disabled for guests. Register Today.
I wish you had included the entire Gcode file as an attachment. I believe it will show that you selected the bottom of the part as origin in...
The G53 move is a safety move, an industry standard for preventing expensive crashes. Z home is the top of Z travel, so moving to Z-10 raises the...
1 - The rattling noise means that your GRBL calibration for 'max rate' is too fast, and possibly also the acceleration values. Set them much lower...
yes, you must select a laser tool for laser output
After you have probed the front left corner of the material, do the numbers on the display show 0's for all axes with the tool at 0,0,0 correctly?...
make sure you always turn on with the Z as high as it will go. and read this for full details on why and how
Ian explained most of it so I will try the next step..... If you click 'wizards and tools' and then 'mobile job widget' you get an address...
I have a handy paintbrush which i use to brush the Vslot clean between or during jobs. I suppose one could permanently attach wipers, but I always...
Do not 'drill them out' as they will not be concentric unless you do it in a lathe. You might get away with very careful hand reaming. Off center...
In the SketchUcam options there is a setting [ATTACH] that last one, "End position Z for G53", set it to -5mm and it will raise to Zhome - 5mm to...
no, just click the 'go flat' icon in the toolbar, either before you close it, or after you open it. The 'open flat' feature caused about half of...
I recommend NOT building a router style CNC for milling stainless Tormach – Affordable CNC Machines, Tooling, & Accessories | Tormach Haas...
for theracermark... here is my terrible KF plane.... as I sit at my desk I look up and right and there it is.... not on the wing rack, the one...
nice to see a Phlatprinter in operation!
blue sides up, if you flip a shape along any axis you need to phlatten it again then add the cut lines.
On a Phlatprinter the tabletop is NOT Z Zero, the top of the material is Z Zero, ie end of bit level with the surface of the machine. Then Z moves...
so the laser is just a pointer for setting X and Y, right? How are you setting Z? since you have to set Z with the current tool you may as well...
in the post options, turn on 'linearize small arcs' and regenerate your Gcode.
nope, gplot is compiled from Delphi code (Pascal) and has no links to the inards of Sketchup at all. nope, 1.5 was released for Christmas, and...
oops, missed the attached gcode earlier. You have somehow infected all your shapes with the backtick disease. A few posts ago I mentioned that...