Separate names with a comma.
Some features disabled for guests. Register Today.
glue the nuts in, and tighten the springs, maybe put spacers under the springs. have you googled for problems with this bed? if this is common the...
Use the zeroffset tool SketchUcam Toolbar (and read all of the rest of that manual too! knowledge is power!) also see [MEDIA] or set a plunge...
downcut bits push the chips INTO the slot you are cutting. if they get stuck in there and get RECUT this will dull the bits really quickly. to...
My shopvac blows a lot of hot air so it warms the room nicely when the machine is cutting (-: Condensation is the enemy for all electronics, so...
Great! Stairsteps point to 2 things 1 - the bit is not exactly 60 degrees, or your software has not accounted for the size of the flat spot on the...
yes of course you can. The combination of motors steps per rev, driver microstepping, leadscrew pitch, and any gearing between motor and leadscrew...
You can use a BlackBox which connects to the PC via USB. Connect a motor only to the X driver. Generate suitable Gcode to drive only the X as you...
Somewhere a ground wire has come loose, not visibly 'off the terminal', but loose nevertheless. I would disconnect and reconnect every wire on the...
Very hard to help you when you do not supply the pictures of the machine Rick asked for, so it was much easier for your son who could see what was...
What you want is a C axis (a rotary axis parallel to the Z axis). For this you will need a more advanced controller than the BlackBox, and some...
I agree with Rick, look at the current builds like the LEAD and Workbee and modify yours to be more like them, at some point you will be able to...
that error Smells like USB corruption to me. Use a high quality SHORT USB cable and keep it away from power cables (AC and motor power). The X...
Also look at Sketchup Make 2017 (the last free version) and the SketchUcam plugin [MEDIA]
Thankyou set this $11 Junction deviation, millimeters 0.010mm to 0.02mm, which is the default, changing these settings ($11 and $12) from the the...
That is because the setting is saved inside the controller (inside the Arduino), not in the GUI software, so each GUI just reads it from the...
please post the Gcode file and a screen image of the drawing, ie what it is supposed to cut
Taig/Sherline will fit in a drawer (-:
If the controller setting is not 255, which GUI you use will never make any difference since it is inside the controller. If the problem is in...
1/8" shank bits are available for tools like Dremel and for drilling PCB's like this: 1/16" drill pcb - Google Search Also, anyone with a lathe...
Hi open OBControl connect to the controller click the 'grbl settings' tab set '$1 Step idle delay, millisecond' to 255 click the save button at...