Separate names with a comma.
Some features disabled for guests. Register Today.
adjust the motor current using the pot on the side of the Blackbox docs:blackbox:currentadjustment [OpenBuilds Documentation] Halfway is how it...
if you read the GRBL wiki, it explains that there are 2 settings for direction, one for main direction , and one for homing direction....
my question is, it is arcs only or everything? G21 G90 G17 G54 G53 G0 Z-5 G0 X10 Y10 G1 Z-1 F500 G1 X-10 Y10 F500 G1 X-10 Y-10 G1 X10 Y-10 G1 X10...
You should read all of this Genmitsu PROVerXL 4030 Offline Controller User Guide before doing anything else. some snippets from a speed read: do...
Fusion360
Peter, it is GRBL for esp32 and supports an A axis (-: (don't know if it is GRBL-HAL or some other variant) but i agree, do not flash until...
maybe it is this? Home, Fusion360 and G53 Z moves
he said it should be 200.236, but changes to the 7xxx value when sitting idle it can be faulty EEPROM (-: comparing a 'it all works' GRBL...
Not strange at all. G28 is a stored position, stored as an offset from home. (often used for tool changers) The default offset is 0,0,0, which is...
if you don't home, home is probably where you turned on and that means it won't cut in Y+ space. can you jog to all corners of the bed?
looking at the gcode, it should start in the middle, move tool left, then cut the top of the circle going clockwise. The drawing in the picture...
read this Grbl v1.1 Configuration · gnea/grbl Wiki
it is a reminder that homing is necessary, not an "instruction to home now because we detected a fault".
flashback to watching 4 tons of machinery bouncing around the floor because the software based Estop did not stop anything at all. (not my...
The controller must be fed the proper diet (-: In this case it thinks 'M3 S0' is the same as 'M5' which is 'spindle off' If you are using the...
Yeah, I had a Banggood parcel in the post office (after customs) for 3 months, had pretty much given up on it when it suddenly started moving and...
so in other words 'something changed between morning and evening' (-:
You have a 128gb SSD, Windows uses ~half that in a default install. How full is it now? Windows starts to act crazy when there is less than...
No, you do not need a PC (-: Mac uses a single LineFeed character at the end of each line PC uses a CarriageReturn and LineFeed character at the...
If you are running your machine commercially for that many hours a day and it is critical to your cashflow, then you should have a spare Blackbox...