Separate names with a comma.
Some features disabled for guests. Register Today.
in your image the arc has a radius of 0.64mm. As the radius decreases, the limits of accuracy of the endpoints approach rapidly. The best fix...
are you follwing the build video? [MEDIA]
Yes, I think there is something wrong with the controller, time to talk directly to the supplier
in the meantime you can do it yourself. in the Serial Console give $# which shows data like [09:42:50] [ $# ] [G54:-60.000,-50.000,-20.000]...
If we look at the Gcode we can diagnose some things.... what speed are you expecting vs what speed is given in the gcode what are the settings in...
y should be homing with the table toward you, that is positive end of tool travel. hard to see the machine movements with the camera gyrating. if...
Please use the openbuilds postprocessor docs:software:fusion360 [OpenBuilds Documentation] and, from the code (dunno what postprocessor you used)...
[MEDIA]
no, the BB has built in drivers, you will need to use a bare Arduino Uno or other controller that supports external drivers. yes, dependant on...
I think it is jamming during some part of the commanded moves because it is not getting enough power. Pretty much all stepper motors get at least...
The code I posted should return the pen to X0 Y0 after the draw. Did it do that? If not then Y is not capable of moving at 2500mm/min as given in...
Here is the Fusion post options dialog The Z start and end offset setting is arrowed [ATTACH]
Peering at your screenshot I think you have the origin set incorrectly for what you want to do. This is what I get when I set up for a 'long...
The posts do not have an issue, your machine, or how you are setting it up, is the issue. In Fusion you must set the origin to the top of the...
@Peter Van Der Walt knows the answer to that one (-:
oh! you edited your post! please use the unaltered OB post and lets see what the machine does. once that is all correct you can alter the post...
ok, so the G53 G0 Z-10 is hitting the limit switch at the top of Z travel? lets just make sure we have the basics.... Z positive tool travel is...
no. you do need to rehome after any errors or alarms, USB reconnect, or power cycle. It will use WCS G54 (the default) and will not warn you...
Ok, so you have set the origin in F360 to be top right. For the probing, you can mess around with custom macros or you can just probe Z (the...
The post processor options allow you to set the Z clearance, which it will then use for the G53 safety move. If you are getting a G53 G0 Z0 move...