Separate names with a comma.
Some features disabled for guests. Register Today.
You are using an older version of the postprocessor, please upgrade as soon as you can from Releases ·...
please read Home, Fusion360 and G53 Z moves
too hot I think, the foam will melt back far beyond what you want, hard to predict
a stepper motor can easily generate more volts than your power supply outputs when you turn it by hand. so disconnect the motor, or turn very very...
put a counterweight on the head to support the weight. just a pulley above the head and a rope from the head, up, over, down to a weight that just...
[MEDIA]
agree He died in 2012 and there is a new holder of the call, a lady in East London. Dad was a ham since his school days in the early 1930's....
could also be the X driver is overheating and cutting out.
Hiya Frik I'd be surprised if such a project does not exist, but I would be surprised if it really works well (-: Let me Google... some products...
remember to reset the BB after changing the settings before you do another move to check the distance
note that aluminum oxide is not conductive So, it is quite easy to fail to probe the surface of aluminum, and if it is anodized (which creates a...
Not just 2D of course, though not true 3D [MEDIA]
There is also the SketchUCam plugin for Sketchup Make, I use it with Sketchup Make 2017 which is the last free version.
no surprise there, Openbuilds CONTROL is made for stock GRBL 1.1 on Arduino Uno Have you tried bCNC?
Here is what I have come up with Note where the origin point is, the end of the stock on the centerline. I have 12mm extra stock there to...
lathes normally run as X and Z where Z is the spindle axis and X is the tool infeed axis. if I understand you correctly, you are using Y as 'Z'....
unless they have changed something in the 3 weeks since I last used Fusion, yes our post puts most of the missing G0 moves back in right click...
Note that slotting is hard even for very expensive cast iron framed machines and should be avoided when possible, see the first 3 videos here
Looks like you were cutting anticlockwise. this means the cutting forces move the bit into the work. If you cut clockwise you get 2 benefits, the...
you need to identify the coils in the motors, then connect them to the blackbox. docs:blackbox:faq-identify-motor-coils [OpenBuilds Documentation]...