Separate names with a comma.
Some features disabled for guests. Register Today.
you need to do this https://www.circuitspecialists.com/dcs3/documentStoreContentServlet?documentId=418118 which is linked from Stepper Motor...
You have already tested for this and proved a faulty port, now you need to contact the store Submit a ticket
SketchUcam generates Gcode, which is just text (no fancy codes like you would see if you looked inside a Word .docx file). Gcode files are just...
M8 is the 'flood coolant' code. So in your CAM software you need to set the flood coolant on for the tool, then the M8 will be output in the...
If what it calls a 'pgm' file is plain text that contains Gcode, then yes you can. You need the SketchUcam plugin loaded into Sketchup Make 2017...
those D-shell connectors are not really rated for Amps of current so I am not surprised if it gets hot at ~3A 'same wire type' is an illusion...
how about thicker wires that can carry the current without getting hot?
first read all of the XPro v5 wiki at Home · Spark-Concepts/xPro-V5 Wiki particularly the sections on hard and soft limits.
With everything switched off, take good photos of the motor connections on the drivers. Gently move each motor by hand, noting the feel and...
'Gerbl' is you might say it, 'GRBL' is the actual software (-: read all about it here Home · gnea/grbl Wiki What does this involve? remove the...
so the room is 10C, is dew condensing? condensation will definitely affect capacitive buttons.
I feel our communication has become a little warped somewhere along here (-: The dialout group exists by default Members of the group can use...
Thankyou I was right, that -4mm Z plunge on the finishing is a problem because the roughing did not cut the shape out to the edge, only to the...
Does it do this in the same place every time?
I believe your Z axis is losing steps, or maybe a shaft coupler is slipping. Check the shaft coupler to make sure 1 of the screws is firmly...
The Blackbox has stepper motor drivers, you have servo motors with their own drivers. If those servo drivers have "step and direction" inputs,...
Yes, but it depends on your actual machine step size, ie, how far does X/Y move for 1 motor step? That has to be <= half of the 0.025mm tolerance...
or you might read the instructions on the bCNC Wiki (-: Installation · vlachoudis/bCNC Wiki
So you are relying on a connection through the greased bearings of the spindle, right? Clearly this is not a good connection, causing probe...