Separate names with a comma.
Some features disabled for guests. Register Today.
yep, fails in check mode. the lines are X1.6707 Y3.2185 G3 X1.6479 Y3.2243 Z-0.8544 I-0.0125 J-0.001 The small I and J values indicate a very...
you can invert the pulse pins in GRBL Grbl v1.1 Configuration · gnea/grbl Wiki
please upload the gcode file and an image of your drawing
your 'name/number' is long, and is inserted into the Gcvode as a comment to help you keep track of what generated your gcode. Comments in the...
for syntax checking you can send a $C to the controller and then send the Gcode. the controller will accept the commands and interpret them, but...
You are correct, you did not add any brackets. Congratulations! you found a real bug (-: The bug caused extra brackets when long comments got...
this is the problem ((Drawing name : AtlantaBraves/Georgia georgia pocket 1/4 fix) (screw up v1)) (Program Name : scrw up) too many brackets!...
yeah, had to reset to get mine to connect to wifi after I set the details.
it cant work because the blackbox has it's own drivers built in, and they are for 2 phase motors. you have 3 phase motors and drivers to match...
i claim age related memory loss....
grbl 0.9 not equal to grbl 1.1 (-: OBCOntrol likes 1.1 1.1 has slightly different pinouts, but it is possible to compile it with the correct...
to be clear, $4 has to be inverted on the Blackbox - ie this is the default in the versions of GRBL that OBCONTROL will install in the controller...
GRBL supplies PUL/DIR signals The blackbox has drivers for 2 phase steppers built into it and does not have a pinout for PUL/DIR so how are you...
please post only the pocketing operation that failed and attach that Gcode file here so we can check it for problems.
I loved TurboCAD back in MSDOS days (-:
don't forget to review the resource on calibration HOWTO Calibrate your CNC Machine for MACH3 or GRBL but using the OBCONTROL calibration wizard...
just write a little Gcode G21 G90 G54 G17 ; always set the modes you wnat and need G0 X100 ; move X from 0 to 100 M30...
if you are just drilling holes then why not use Sketchup (Make2017 free version is great) and SketchUcam? SketchUcam has a hole pattern wizard (-:...
I wonder if the wheels on one side should be allowed to pivot? That would account for any irregularity in the floor surface and maximize the...
I don't know anything about durometer but have cut various kinds of rubber and foam and can speak about bits. SHARP, very sharp, and have spares...