Separate names with a comma.
Some features disabled for guests. Register Today.
ah, ok, missed the clues (-: what are you max rates for the machine? I see in the code speeds over 10 meters a minute, which is pretty fast
some posts do that because GRBL insists that a feeedrate be set before the first g1 move, and since they coudl not figure out how to ensure an F...
I see and 'M3 S18000' line which is commanding 18000rpm however, this won't work unless your GRBL settings are correct for your spindle. look at...
you coudl also search and replace the existing numbers in the Gcode file with new numbers. if you post a sample Gcode file here we can check for...
the problem is that you are not using the OB post for Fusion (the default GRBL post sucks because the folks at Autodesk have not read the GRBL...
it is a particularly dry day? that can lead to the vacuum hose generating static electricity that causes a pro0blem. keep in mind, vacuum hoses...
I use a fishing scale to pull the belt tension to a known value, in my case 12kg. You will need some extra hands to pull and tighten and prevent...
Nema17 on a router? hmm, I would not bother (-: Nema23 highpower if my google of that machine gave me the correct picture.
your Y axis is losing steps. check all grubscrews, the motors vibrate and tend to loosen everything. make sure the leadscrews are clean and nuts...
strange, was sure my Uno had the default on it, just burned it last week from a fresh copy of GRBL 1.1g oh, I see what happened, I flashed from...
also $11=0.010 ; Junction deviation, millimeters default is 0.02 please please don't change these specific defaults (junction deviation and arc...
and don't install the wrong version! you want the 3 axis version not the 4 axis version the highlighted one [ATTACH]
the 4x setup generates 0 arc segments so that will never be a problem
well, the 1x setup shows lots of little curls along the edges of the dimples, yet the 4x setup does not, so you need to compare the 4x setup to...
oh, serial console is in OBCONTROL on a PC, the Interface does not give us a lot of debugging options. [ATTACH]
is this for all the paw prints or just one? so far I cannot see a problem in the gcode excepting that it is generated by that awful default grbl...
if you do get another failure with the new post please attach your fusion drawing here so I can look at what is generating this problem
yes try it like this in the Log/Serial console tab give the command $C and it will go into check mode (or turn it off if it was on) Check...
How small? please upload the file. also, how big is your tool? Arcs that have radius smaller than the bit radius will be linearized if the...
X is slipping, mechanically or just missing steps due to overload. it is coming down in Y then curling clockwise going left in X. since it is...