Separate names with a comma.
Some features disabled for guests. Register Today.
and once you know the uno pin you can follow it through the traces on the protoneer board....
so obviously we need to see the macro code, please attach it to your next post
mount, and takes 5v or 10v pwm input as a brightness setting
stepper is better, i find servos to be very jerky mount the pen on a spring, then 'depth of cut' will set penpressure
does it make noise after it stops? then max speed is too high and/or motor current is too low
I avoid using G92, it has too many side effects that can surprise you. G20 G54 G91 ; move relative to current point G38.2 Z-1 F2 ; probe Z down...
more information Home, Fusion360 and G53 Z moves How to 'Fake the home'
no need to remove anything, just raise Z to the top and reset the blockbox there. That is the simplest 'fake the home' move of all since 'home'...
in Fusion360 you have to move the origin of the setup. [MEDIA]
X and Y and Z ? at bottom left of your workpiece? from the code it looks like your work zero is the middle of the worpeice, so you need to...
SketchUcam has a mode for that, tools|phlatboyz|options|feature options|force all gcodes on for marlin [ATTACH]
SketchUcam has a laser mode but not a plasma mode. To get plasma touchoffs you will have to do some searchandreplace in the gcode file. I don't...
have to agree, and yet it was simple to allow SketchUcam to output positive Z moves, so, longterm you must plan to do the above, meanwhile...
yes uncheck it, and colored blue is NOT the default, that indicates a change.
because the machine moves and vibrates and copper work hardens and cracks when bent repeatedly. that is why we use cable chains and cable chain...
also, in OBControl you can see the machien coordinates if you hover your mouse over one of the co-ordinate boxes mouse cursor is over the X box...
this action means you have changed soem of the postprocessor settings from the defaults. The default is to raise Z to just below the limit switch...
I do a lot of windows installs and somehing I have noticed for many years now is that no matter the hardware windows is nice and snappy until I...
if you search for my postings on this topic you will find a link to an excellent video on how to use bCNC for this.
my belt drive Ox has been running fine for years, the only thing I need to replace are the blunt cutters (-: so, get some spare cutters, and plan...