Separate names with a comma.
Some features disabled for guests. Register Today.
He it wants in the Interface Yes, CONTROL already has it (though I'd like the alternate, type in a number and press enter to have that axis set...
This is pointing toward EMI causing lost steps, or more lilkely, dirt in the wheels/bearings or leadscrews. If it si EMI whicjh was not happenign...
when you click 'reply', at the bottom of the edit box where you type your reply, is a button labelled 'upload a file'....
are you still using Candle? I liked Candle but it does not handle work offsets correctly all the time, have you tried OpenBuilds CONTROL? When...
That machine has a very low cost driver chip in it, and though the spec sheet is not clear I strongly suspect it is one of the chips that needs a...
No, I am saying that the drivers and psu are better, the controller is a GRBL box as far as I can tell from their website which tries quite hard...
I don't a see a mention of how you are generating your Gcode, nor an attached Gcode file for us to check so I am guessing. if you are using...
the Duet connections you linked make no mention of needing an extra psu connection
while SketchUcam is great, the slow ramp you want can be done in Fusion360 with the free private use license (-: staying down is as simple as...
Seems to me it is as simple as connecting the "GNG and 0-10v output" on the BlackBox to the "GND and Us" connections on the Mafell Then set the...
Their web page does not give any detail on their control box except that they are running separate drivers at 48v That is in fact better than the...
tables are all very well, and I like them. but logic tells me 0.1 per tooth is breaking the endmill (whereas half that is NOT, the ramp feedrate...
looks like you are ramping at 350mm/min and then it accelerates to 700mm/min when the real cut starts, but that is fast enough to break the...
what Giarc is really saying is that you need to make sure your tool is moving in the correct direction relative to the work. X+ is tool to the...
could he use a button the the X32 for 'resume'?
this is an absolutely infallable way to crash into something valuable (-:
2 wires and 2 interfaces doing the same thing indicates a problem at the Blackbox end. please talk to the store for diagnosis
the best way is to use 2 tools, a big one for roughing quickly, and a small one for the details (-:
after you generate the gcode open the file in notepad search for the M6 command remove it like T1 M6 will select tool 1 T4 M6 will select tool 4...
doubt it can do the motors, they are DC motors, right? the steppers will move but might be overpowered, I don'tknwo what the low end of the...