Separate names with a comma.
Some features disabled for guests. Register Today.
also look at Acorn, one of the nicest GUI's I have seen [MEDIA]
yep, the Gecko and Mach are propbably the right thing for that machine
slow down the max feed rate in the GRBL settings, and slow down the acceleration rate. if there is dirt anywhere it can stop the axis when moving...
feedrate is set by the gcode to 381mm/min, which is pretty slow, you wil wait for that for sure,
e-stop switch must be in the power line supplying power to the 24v PSU so the stepepr motors stop instantly.. if possible it can also cut power to...
please attach the Gcode file for that job so we can look at it
beautiful enoguh to actually build (-:
some years ago when I first built my machine I used a Dremel as the spindle. I got one of these right angle heads with the aim to do exactly what...
ah, the length of the part woudl have been useful information up front (-: no way to swap in the app swapping wires, yes, but.... so, in the...
oh, another thing you could do is cut a slot in your bed so the 7" part can stick down below the bed. you will have to move the machien off the...
no need to reassign axes, just modify the Gcode with some clever search'n'replace and also limiting what is in the Gcode, IE, linear moves (G1 and...
You can ignore those builtin setttings, just leave the defaults and the post will work perfectly. (to be technical about it, that particular...
N1 is right, you dont want too little of the bit gripped by the collet You also want the least amount of stickout that will get the job done....
you can do that with the bCNC controller GUI, it is a bit of an advanced function though, I recommend just machining a fence in place that you can...
and, fit the collet to the nut before inserting the tool into it.
that off center ring is normal for an ER collet nut. when you put the collet into the nut it will center itself. (you must put the collet into...
my guess is the switches were switching power to the DC motor, the diode provides automatic 'can approach and stop and can then reverse away but...
I use a thin flexible plastic ruler to hold down the probe, keeps my fingers out of it and securely holds it down while th eprobe sequence runs
where are you setting the origin in your drawing for the CAM? CONTROL expects it to be near,left,top of the material, but it does adjust the...
like this AVR ISP USBASP Programmer Downloader + 10PIN - 6PIN Adapter