Separate names with a comma.
Some features disabled for guests. Register Today.
nothing wrong with .338 here so my guess is something wrong with your usb cable or PC. move the usb cable away from allother cables and restart...
well done!
that is weird could be the plugs or the connection to the plug, make sure the wire goes into the correct gap in the plug when the screw is...
hehe, I get it, spindles don't take hostages, just like table saws. The power off switch is your friend, so is a checklist for running jobs,...
I am wondering where would this rogue signal come from? When the pin on the blackbox is low it is driven low, not just floating around about low...
router UP is the Z axis 0!!!!!! that way the Gcode can do safety moves at or near Z0 and avoid hitting things on the table. for more info Home,...
dirt on rollers? acceleration too high?
nope, it is labelled 'Mode' and since ESP32 chips need a particular pin held low in order to boot into 'flash new software mode', that is probably...
yes read the grbl wiki github.com/gnea/grbl/wiki about communicating with GRBL I would tend toward a pair of ESP8266's for bidirectional comms.
please post your Gcode file so we can review it
Peter I think he already has a suitable XY version of GRBL, as per above.
before homing (turn it off in the grbl settings) you must make sure the X and Y motions are in the correct directions. You do this by using the...
the answer is "use 8mm ID bearings" (like everyone else does) (-:
briefly, the main things are x32 has: 2 relay outputs (BB has 1) XYYZ or XYZA driver configuration, where A is a rotary axis (BB is always...
then you only need to set the X homing pulloff distance to the correct value. Then it will home and pulloff to the settting you want, then home Z
Hi Roger To upload the pictures click the 'Upload a file' button at bottom right of this reply box (on a PC, a phone/tablet will have a button...
Homing is a fundamental stage of a machine 'coming alive' and there is no way to run Gcode between X homing and Z homing because the Gcode will...
no, I don't think we want it to home the moment it resets or powers up. what I want is to power up in an alarm state, can only home before...
here is one $65=<boolean> : default 0 (off). Require homing sequence to be executed at startup(?). Replaces #define HOMING_INIT_LOCK.