Separate names with a comma.
Some features disabled for guests. Register Today.
check all motor connections, especially Y2, and by check I mean unplug, pull/wiggle the wire in the plug and physically make sure all is properly...
seems like you are not getting a successful homing. in the GRBL settings turn homing off and reset the xpro now you should be able to jog around....
why does the bike lift safety instruction include 'do not use during thunderstorms'.... what? <-:
how about this [MEDIA]
if there is no setting, then you dont need it (-: exact radius of cutter will apply mostly to finishing cuts, for which a morphed spiral is not used.
GRBL firmware cannot do this, you have to do it in the GUI software (CONTROL/bCNC/UGS etc). In CONTROL, you can write a macro that will do your...
yes in Fusion360, , in the options for each cut there is a section for 'compensation' with options for in computer in controller in computer...
GRBL, the software in the BlackBox, does indeed prefer some things different to the Gcode Mach3 likes, so using our postprocessor is recommended....
so that is what REALLY changed, the size of the bit. A lot of automation goes on in generating Gcode, I don't know VCarve but Fusion360 has...
the hardware of the blackbox X32 can do it, the actuators will need home switches to establish '0'. after that just send the Gcode to get the...
the exact dimensions of the tool are important enough that some very expensive equipment is made to measure them, no you don't need a Spironi, you...
Measure the tool diameter with a micrometer (1)and enter that into the CAM so that the Gcode is generated with the correct offsets. 0.6mm can...
The Acorn is FPGA based IIRC, not GRBL, Acron sells their own pendant MPG CNC control pendant wireless WMPG-4
and there are resources: HOWTO Calibrate your CNC Machine for MACH3 or GRBL
seems to me you have not specified a feedrate OR there is a communication problem and the feedrate is being mangled, thus the return of 'FaN'...
once you have selected mm mode and the jog you want, close the program and it will save those setttings for the next startup
oh this is *delicious* . Very keen on playing with this.
you can use bCNC to edit the code, it splits the code into blocks on Z motion, when you click a block it highlights it in the preview. you don't...
no, the blaockbox has drivers built into it, to drive open loop steppers via 4 power wires closed loop steppers have their own drivers (that do...
or you can use the correct postprocessor to generate Gcode that does not contain M6 codes (-: how are you generating your Gcode now?