Separate names with a comma.
Some features disabled for guests. Register Today.
does the Genmitsu controller run standard GRBL 1.1? if not then CONTROL will not work, but bCNC might.
once you have fixed the wiring, if you still have no movement, change the max rate and acceleration settings to half of the existing values and...
just load the settings, only erase eeprom when you have proof that you need to.
cannot see anything wrong with the Gcode, but I do see that the post version is 1.0.32, the latest is 1.0.36, please upgrade so we are all using...
not the bluepill, the PiPico, responds like this [15:57:41] [ 3D Viewer ] WebGL Support found! success: this application will work optimally on...
will try it again and see...
Nema17's are great for 3D printers and laser etchers. Nema23's are what you want for a CNC router, especially Z has to move much more weight. You...
I tried a BluePill with the same result, believe that CONTROL is looking for the USB ID of the BlackBox, though it will find a generic Uno/GRBL...
shorter USB cable is ALWAYS better (-: 2 feet is a nice length
yes TTL is 0 to 5V 5.8v is ABOVE the TTL standards and will probably hurt soemthing
many many people have had similar problems it is one of 2 things 1 - the mac is power saving the usb port, windows does it too, and the power...
when I was looking into moving my OX from dual Y drivers to single driver runnign both motors I found a number of web pages advising connecting...
if this is a belt drive machine then you have the motors wired incorrectly, one must be reversed. if it is leadscrew driven, then the wiring is ok...
autolevelling is an advanced thing, so time for some advanced software, bCNC
also, calibrate over longer distances, 100mm is too short for the best accuracy. ie you cannot see 0.01% error over 100mm, but you can over 1000mm
in the gcode I see that some holes (top left) are being cut with arc commands and some (top center) are being cut with many small line segments,...
that is probably because they were running very high current through the motor and then turning the driver off to let it cool, the lock keeps it...
yes, please attach the gcode file meanwhile, you may want to enable smoothing, this reduces the number of short line segments making it easier...
with reference to your image of a broken limit switch.... change the way the switches are mounted so that it is triggered as the carriage goes...
please tell us your process, which CAD software, which CAM software, and attach a screenshot of the drawing and the Gcode you are using.