Separate names with a comma.
Some features disabled for guests. Register Today.
Dropped a new post version last night, v1.0.37 This includes a tape splitting feature that allows you to set a line limit, gcode files will be...
i cant read the labels in your photo, too small. but at least one of those pins in a signal ground, use that. I don't know if the BBx32...
MArlin has runtime settings for steps/mm and aceleration, you wil need to read the Marlin wiki
your max speeds are too high. default zsfo rlLEAD machines are [14:30:46] [ $$ ] $110=2500.000 ;X-axis maximum rate, mm/min [14:30:46] [ $$ ]...
to the signal ground in that same set of pins, NOT the ground that the 24v psu uses
no, do not connect the PSU ground to the signal ground you need 3 wires from the controller to the pulse and direction inputs on the driver GND...
then on the PC open a command prompt and type ipconfig and press enter which on mine produces Ethernet adapter Ethernet 3:...
BETWEEN the two boards, mine is labelled there
have you looked at the other side of the board?
To load the Openbuilds postprocssor for Fusion360 just follow the instructions at docs:software:fusion360 [OpenBuilds Documentation]
bCNC is really good for this, Candle is YEARS old and out of date. GitHub - vlachoudis/bCNC: GRBL CNC command sender, autoleveler and g-code...
not really a useful message..... please answer the questions: (by clicking the 'reply' button at bottom right of this message) 1 - what IP does...
and that means your 10mm indicator is too short. I tried it myself on my Z, and it just did not get me a useful calibration. a 50mm indicator...
and if you are not homing, then you should, really really should, either with the switches you have, or if you don't have, then fake the home How...
iOS, hmm, open a terminal and type ifconfig and press enter ? or, y'know, google.... ios ip adress - Google Search (-:
you connected the Interface to your wifi, what IP does it show? nowhere in the Openbuilds instructions section 3 does it mention needing credit...
just some sturdy paper over the spare holes is all you need
the PC and the phone have to be on the same network. Each will have it's own IP address on that network. if your PC is connected to the phone...
you dont click them, they change color when the state of the switch changes, sowhen you put metal at the sensor the color changes on the screen....
maybe he has selected a 'laser' cut, that would put M5/M3 between each letter.