Separate names with a comma.
Some features disabled for guests. Register Today.
if you have fusion360 on an actual licence then you can partly ignore this.... if you have it 'free for personal use' then you should be using the...
do not use R format arcs, anywhere, anytime, just don't <-: so prone to massive errors, just not worth it X32 shoudl do a circle ok with IJK...
no need to rewire motors, the GRBL settings for axis direction will fix the basic directions then the settings for homing direction will fix...
this is wrong, something has reset your GRBL setup 1 - turn homing off 2 - set axis drirections so that X+ moves right Y+ moves away Z+...
which is why I use an optical sensor.... Optoisolated Z probe and I also think that the XYZ probe plate should have an optoisolator and battery in...
I use a fishing scale to pull my belts to 12kg tension, making sure all the belts are the same tension. This removes the guesswork from belt...
it is essential that, using the computer, you configure the correct directions for the machine. OpenBuildsCONTROL makes it easy to change the axis...
please confirm which Blackbox you have, the old 4X or the new X32? thing is, the 4X will make probing from fusion360 impossible, but the X32 has...
here is a good primer on arc coding, more than you need to know, CAM is much easier, much quicker and much more robust (ie once the CAM is...
not unexpected, the post has no code in it for probing, you are the first to try it (-: I will have to write code to handle probing routines since...
I think fusion wants you to select the center of the base of the ball as the WCS. since you can measure with your handy micrometer (actually it...
will look monday, too late now
you just need to change the pulloff distance, proximity sensors need a bit more pulloff than mechanical switches. in openbuildsCONTROL activate...
sounds like you reset the calibration on the blackbox you can use openbuildsCONTROL to recalibrate after you have the calibration confirmed, you...
yes, put M0 in the Gcode. This will cause a pause, you cannot display a message, press 'run' to continue Using a timed pause while an operator...
so far the instructions consist of this page on github OpenBuilds-Fusion360-Postprocessor/README-plasma.md at master ·...
probably not, the mega is only running at 16mhz and the gRBL code is highly optimized to be able to run at all at that speed. Adding more...
so you are saying that when the tool is moved 'far' away from home, Z acts weirdly. (knwoing exactyl what it does would help us analyse....) I see...
Hahaha! Yes, possibly. I’m a bit of a neat freak. I would like know more about those fixed offsets you mentioned. Can you elaborate or send me...
reset the Blackbox and run the home cycle, should be fine after that