Separate names with a comma.
Some features disabled for guests. Register Today.
ChatGPT (free AI chatbot) does an excellent job of translating French to English and back. so you can type your question in french, have it...
so get a donek and put some CA gluein the bearings ? (-:
I did a bunch of sketchup CAM videos some years ago, cant recall now if one of them does a full walkthrough from drawing to product. Have a waltze...
I like to do a binary search: say the default is 400mm/min double it and try 800, works? double it to 1600, works? double it to 3200, fails! ok,...
GRBL is dead, long live grblHAL (-: no reason to try the others unless you are willing to dig into the documentation for each of them to see if...
I did not say you need a Blackbox X32, I said you need to look at what grblHAL can do with a Teensy or similar board, the ESP32 in the X32 is...
there are so many variables! are all these tests with the same USB cable? that might be the root issue, bad cable, bad life (-: are some of the...
you do not want an Uno nor Blackbox based system anymore since a grblHAL based system with something like a Teensy board can do all of what you...
Hmmm, found some interesting things in the plasma processing.... go here GitHub - OpenBuilds/OpenBuilds-Fusion360-Postprocessor: Post Processor...
I will look deeper at this later but so far I can see that his gcode thinks the tool diameter is 1.38 inches. ( Tool 3: Plasma Cutter Diam =...
yup, seeing the same behavior when your settings are loaded. Will check later against the BB X32 as well, and maybe run it on my router (belt...
thankyou, I will load this into a controller later and test again GRBL 1.1g as loaded by CONTROL.
wrong (or different) GRBL version. when I load GRBL for the 4x from openbuildsCONTROL I get version [VER:1.1g.20181112:] please flash this...
turn homing off and use the 'fake the home' method instead. this means home is where it turns on or resets, so you only need to make sure to park...
that would be trying to move in inches instead of mm. G20 and G21 are modal commands, they are remembered until changed all macros must always set...
you don't mention it so lets check, you are jogging to the point on the material that you indicate din the CAM is the 0,0,0 point and clicking the...
yes, in V1.0.0.38 GitHub - OpenBuilds/OpenBuilds-Fusion360-Postprocessor: Post Processor for Fusion 360 for use with OpenBuilds Machines running...
in the background of that error message the GRBL version is displayed as V1.3a Rabbit GRBL for the ESP32 I am pretty sure the since CONTROL is...
Well, I have now barked at this tree for a couple of hours: a) both your Gcode and any Gcode I generate is correct b) neither the 4X nor the X32...
it caters for router, laser and plasma machines it fixes small arc errors it reinserts missing rapid moves when needed it does not use G28 but...