Separate names with a comma.
Some features disabled for guests. Register Today.
I would turn down the maxrate and acceleration and then run the calibration wizard note that the math is simple and explained in various...
backup all your settings then try it and see. (-: or you can reduce the max speed of that axis, which will reduce the kernel speed requirement...
hard limit and homing <> soft limits turn on homing turn off soft limits
or 1 nema23 motor and belt all 4 leadscrews together no programming needed, just connect the 'dir' pin from all 2 (4) drivers to the DIR output...
you need a laser module from the store Lasers - OpenBuilds Part Store (follow the links there to the instructions) plus cables to connect it to...
iirc the shield has jumpers to pair x or y to the 4th driver
try this, i added a real Z retract
blur viewer-pause.js:1:225 Cross-Origin Request Blocked: The Same Origin Policy disallows reading the remote resource at...
unplug and replug both ends of the pwm cable, after 18 months it is likely that the pins are corroding a little and creating some resistance,...
Buda 300 font does not work for me, others do
yep, no text for me either.
is your machine actually square? and a little perspective..... you are chasing 15 thousands of an inch in WOOD, tomorrow when the weather changes...
Blackbox X32 is what you need, suports SD card, web interface, network interface, direct USB interface, our easy to use software and this great...
you can also address the size of the file.... maybe he needs to turn on 'smoothing' in Fusion360 or a similar setting in other CAM software to...
you dont need to know that at all. once the controller is calibrated to go the correct distance , ie it goes 1 inch when told to go 1 inch, the...
400 is correct as a starting point, subject to calibration for which you can use the wizard in OpenBuildsCONTROL. for a 1204 I believe the...
a hot wire foam cutter? then you need to see https://www.youtube.com/@rckeith otherwise I need pictures of the machine please, I don't get where...
I think you can mean 2 things here, 1) how to find a home position, and 2) how to calibrate the distance moved 1) if you use the 'fake the home'...
yes, this is a common problem with rotary axes and is solved in postprocessors by detecting when a rewind is needed and then doing a...