Separate names with a comma.
Some features disabled for guests. Register Today.
yes you can do that, you will need a high torque motor for the X as it is lifting the weight of the router.
Thanks for the file. First I deleted small segments from the ends of the bridging parts. The bits I deleted are about 0.3mm long. Example of...
no, CONTROL feeds gcode to a GRBL based controller via USB Mach3 cannot do that, it feeds commands to a parallel port, or one of the external USB...
i will await the sketchup file, backstitching is a known issue caused by sketchups internal shenanigans with line order, ie it *sometimes*...
replace the mouse NOW I have had this exact thing with 2 different brands of wireless mouse (Microsoft and Genius), a cheap wired USB mouse solved...
i agree, bit fast for drills, I would do a spiral bore operation for the larger holes (3mm up) for the 1 and 2mm drill 10k rpm will be ok,...
you use the 'fake the home' method How to 'Fake the home' also, why we home,,, Home, Fusion360 and G53 Z moves
please upload your Gcode file so we can check it
thanks, ,.looking at the J we can see that the head is cutting left to right and moving bottom to top to do the curve, then X stops moving and Y...
slow it down more (half the maxrate, and half the accdeleration), the jog is not at full speed, but G0 moves are at full speed, and clearly that...
puty a 0 in the blank field, then save
G53 commands operate with reference to home and add to that my apologies, I missed the randomness of it. random movements imply EMI or other...
some Gcode moves are relative to home, that is why homing is important, as explained in the 2 links I gave you
The machine needs to be homed before you run Gcode. Either homed with limit switches or use the 'fake the home' method if you have no switches....
only jerking in Y- direction as far as i can see, other curves are just fine
the above means you have the old version of the postprocessor you need at least v1.0.42
15m with the right cables will not be a problem. wifi WILL be a problem, the slightest glitch will cause sync errors and the gantry will twist
some do, some don't. Tormach is commercial, so it Millright and they both have conversational interfaces.
most commerical cnc come with 'conversational programming' built into the interface. Notable is Pathpilot built on top of LinuxCNC on the...
dial down to 8x microstepping, you don't need more than that. then you will be able to increase the acceleration and max speed too.