Separate names with a comma.
Some features disabled for guests. Register Today.
jog/cut directions must match the cartesian coordinate system of tool movement, this must be correct before you can home correctly. X+ is tool to...
There is, upgrade your wetware with actual Gcode knowledge (-: The <offset> in the file is a variable and not part of standard Gcode. The...
do make sure the stepper motor is NOT connected at the time , they can generate enough voltage to blow the drivers.
it is possible to mount the limit sqwitch upside down causing a short between the power and the frame of the machine, which will cause a reset...
not sure I understand what you are seeing..... home is machine 0,0,0 (Machine Coordinate System), set by homing when you 'setZero' you are...
love that! now i need one... or more...
either backlash or the head is nodding. as a test, put the work on a 2" thick block so the Z does not have to extend down so far.
I followed the NYCCNC channel's 'fusion Friday' videos for years, focussed short dives into specific things, rather than 2 hour long videos that...
check your email spam folder
that is a tool change command GRBL does not support tool changes, which infers that you have not chosen the correct post processor in Vectric to...
load the LEAD 1515 profile and then adjust as needed after you have motion. you will need to calibrate
your X axis is losing steps, most likely during a rapid move. check for anything loose, grub screws in the couplers etc. make sure one of the...
[MEDIA] the pause is the G4 command G Codes draw the path you want on some paper and fill in the coordinates, then wrtie the Gcode using those...
nothing wrong with that gcode, it expects the top of the material to be Z0, and it expects Z home to be the top of Z travel as is standard on all...
This just means that you have accidentally done the right thing in turning on/reset the controller with the Z high enough that it acted as a fake...
the machine must be homed before starting a job, before settting the work offsets even. Once the machine knows where home is (at the very least Z...
your maxrate and acceleration are probably too high causing the motors to stall after accelerating for a bit. Grbl v1.1 Configuration
a bit fast for copper.... copper workhardens to be careful to never rub on it, and a dull tool will do that. sharp solid carbide is what you...
please upload your gcode for checking
backlash is always mechanical, something loose somewhere. a regular oval hole is more lilkely calibration, X or Y is travelling further/less than...