Separate names with a comma.
Some features disabled for guests. Register Today.
maybe the relay is sticking closed?
you can reverse the pin using the $14 mask Additional or extended settings
please use the openbuilds postprocessor docs:software:fusion360 [OpenBuilds Documentation]
jog X+ must move the tool right relative to the work jog Y+ must move tool away relative to the work jog Z+ must move tool up away from work yes,...
bit are never the stated diameter. that is why very expensive tool measuring devices are used in industry to measure every tool before it is...
there is this for linear axes GRBL settings calculator the math is not difficult and is explained in several places on these forums. (though not...
machine zero, yes, but not WORKPIECE zero, used by G54. please read this Home, Fusion360 and G53 Z moves
only the router is what you want turned on and off by the controller
well, you see, machines do not work like that..... they have a Machine Coordinate System (MCS), this is set by homing, or in GRBL's case,...
then you need to be following the proper 'fake the home' method else it (the machine, nor gcode) will not work correctly please read How to 'Fake...
ah, yes that is obvious, when it retracts it expects to see the probe connection BREAK during the retract move, but it did not move far enough to...
can you post a backup of your GRBL settings? slow acceleration should not be causing a probe failure, usually probing fails if the distance is...
GRBL wants X Y I J on every G2/G3 line. writing your own Gcode is an excellent vehicle for learning Gcode, but using a CAM for production code is...
coolant should just default to none if the user has not selected an actual option (ie no coolant codes are output). Usual option is Flood, Duet...
GRBL only uses relative I J K offsets, LinuxCNC can use absolute or relative. also, although GRBL can do full circles, it does not always work,...
if the genmitsu controller runs GRBL 1.1 or grblHAL then it already stores the settings inside itself, so it will 'just work'.
you will need to remove all references to the alert() method call and if you used 'power' as a local variable, you have to change the name since...
I made a plugin for bCNC for rounding stock in a 4th axis. initial trials went ok, but it is very much alpha. You can use this to just generate...