Separate names with a comma.
Some features disabled for guests. Register Today.
That's going to depend on a ton of stuff.... what is the spindle speed? what chip load are you looking for? What material are you cutting? Depth...
Thank you David that makes sense... I'm sure I'm not the only that has had problems and you will have helped me and future others!! thanks Bob
CAMotics
last way and the safest. opto-isolator there is no connection at all to your camera, so if something goes hair wire your camera survives.... same...
how to wire the board. pretty standard.... stepper and power easy... pin 53 is the pin that goes from 0v to +5v as the Arduino tells the camera...
the guy I got the idea from... DIY Timelapse Motion Controller: The specs | Mrinabh Dutta 1.5 lead screw might be too long....(whipping)
must be late....LOL bit diameter was the problem, all happy now!!!!!
I had this issue before but I can't for the life of me figure out how I fixed it last time this is to hold an Arduino board down, needs 4 3mm...
I bet if you talk to mark he would change out the 3 extrusions you would need longer say 600mm instead of 500 and you would have it. It wouldn't...
I have to agree if you want more travel then just swap out the c-beam's for the 1000 mm units and add an extra y c-beam but then you are going to...
sorry I was wrong I just checked... the bearing block does stick above the c-beam and does limit the travel. you could cut the plate so that it...
yep you are off it doesn't hit it's flush with the top of the c-beam....
Mark In the video you are using a 1/8 end mill to cut aluminum do you have a link to the bit you used? Thanks Bob
Looks great I don't have the attention span for that....LOL My ox is on saw horses with a piece of plywood on it. Just bought an c-beam machine...
working, had to use a relay board to show camera firing, I don't have short enough bolts for the legs.... [MEDIA] [MEDIA]
20151115_213915 by snokid posted Nov 15, 2015 at 9:53 PM20151115_213906 by snokid posted Nov 15, 2015 at 9:53 PM20151115_192731 by snokid posted...
getting closer figured I would post my progress so far.
