Welcome to Our Community

Some features disabled for guests. Register Today.

OX Plates

Discussion in 'CNC Mills/Routers' started by plexer, Sep 15, 2014.

  1. Peter D'Arcy

    Builder

    Joined:
    Nov 10, 2014
    Messages:
    2
    Likes Received:
    0
    I would also be interested in a set, please let me know if that is ok

    Regards

    Peter
     
  2. plexer

    plexer New
    Builder

    Joined:
    Sep 5, 2014
    Messages:
    93
    Likes Received:
    5
    Wohooo 12/12 ok guys please let me know if you're name's on the list and you still want you plates I will sort out the next step as soon as I can.

    Sorry for being absent but I've just started a new job and have no mobile service at the new office.

    Peter, you're on the reserve list in case anyone doesn't need theirs now I need to have multiples of 12 I'm afraid.

    Ben
     
  3. Dutch

    Dutch New
    Builder

    Joined:
    Oct 27, 2014
    Messages:
    9
    Likes Received:
    0
    Hi.
    Still want them. Can't wait. )
     
  4. 1972

    1972 New
    Builder

    Joined:
    Sep 21, 2014
    Messages:
    24
    Likes Received:
    20
    Hi Ben,

    I'm still in.
    Cheers,
    Chris
     
  5. thommy

    thommy New
    Builder

    Joined:
    Nov 7, 2014
    Messages:
    16
    Likes Received:
    0
    I'm in. Any chance you could cut the OX AI plates with the nice logo and belt clips?
     
  6. Keith turner

    Builder

    Joined:
    Nov 10, 2014
    Messages:
    7
    Likes Received:
    1
    Hi Ben,

    I'm on the list and still in,

    Regards,
    Keith
     
  7. Indieflow

    Indieflow Journeyman
    Builder

    Joined:
    Mar 28, 2014
    Messages:
    127
    Likes Received:
    135
    I'm still in please Ben
     
  8. JakeC

    JakeC New
    Builder

    Joined:
    Oct 31, 2014
    Messages:
    2
    Likes Received:
    0
    I'm definitely still interested,

    Thanks,
    Jake
     
  9. alistag

    alistag New
    Builder

    Joined:
    Feb 9, 2014
    Messages:
    3
    Likes Received:
    0
    Ben,

    Yes, I'm still in

    alistair
     
  10. thommy

    thommy New
    Builder

    Joined:
    Nov 7, 2014
    Messages:
    16
    Likes Received:
    0
    I needed to move this project along so have gone and got my plates cut locally as the opportunity suddenly arose. Peter can now take my place on the list and be one of the lucky 12.
     
  11. plexer

    plexer New
    Builder

    Joined:
    Sep 5, 2014
    Messages:
    93
    Likes Received:
    5
    Peter I've swapped Thommy for you if you're still interested.

    Please check the list in post one as soon as I have 12 confirmed people I will submit the latest available dxf file to my supplier and confirm pricing with everyone.

    Paypal ok for everyone? will have to add the fees into the cost unless people want to send as a gift payment but I understand that you may not want to.

    Thanks

    Ben
     
  12. Indieflow

    Indieflow Journeyman
    Builder

    Joined:
    Mar 28, 2014
    Messages:
    127
    Likes Received:
    135
    PayPal is fine for me Ben!
     
  13. 1972

    1972 New
    Builder

    Joined:
    Sep 21, 2014
    Messages:
    24
    Likes Received:
    20
    Paypal is fine with me Ben, cheers for sorting this.

    Chris
     
  14. Peter D'Arcy

    Builder

    Joined:
    Nov 10, 2014
    Messages:
    2
    Likes Received:
    0
    I'm still interested if that is an opening there for me.
    How does one pay?
    [email protected]
     
  15. plexer

    plexer New
    Builder

    Joined:
    Sep 5, 2014
    Messages:
    93
    Likes Received:
    5
    Hi Peter,

    I've added you to the list once I have a confirmed list of 12 and I've confirmed the cost with my supplier I'll contact everyone for email addresses and send out paypal details.

    Ben
     
  16. Keith turner

    Builder

    Joined:
    Nov 10, 2014
    Messages:
    7
    Likes Received:
    1
    Paypal fine with me
     
  17. Indieflow

    Indieflow Journeyman
    Builder

    Joined:
    Mar 28, 2014
    Messages:
    127
    Likes Received:
    135
    Ben,

    Any idea when you will be looking at placing the order for these? Just wondering on lead time as it would be great to have the plates by Christmas time if possible!

    Thanks
    Simon
     
  18. plexer

    plexer New
    Builder

    Joined:
    Sep 5, 2014
    Messages:
    93
    Likes Received:
    5
    I will email the latest dxf to the waterjetters tonight to check pricing is still the same'ish and then once I've confirmed the cost and shopping I will start to take payment.

    Then when I have everyone's money I'll commit the order.

    Ben
     
  19. oximoron

    oximoron New
    Builder

    Joined:
    Nov 26, 2014
    Messages:
    12
    Likes Received:
    0
    I'd like to claim a seat on the bench in cynical anticipation of a less than 100% committed first team... Or put less stupidly, if someone drops out can I have theirs? Money ready and located in South Wales.
     
  20. plexer

    plexer New
    Builder

    Joined:
    Sep 5, 2014
    Messages:
    93
    Likes Received:
    5
    Guys I just looked at the latest dxf and see there is a taller Z plate that's been added do you all want that instead of the normal one?

    Ben
     
  21. oximoron

    oximoron New
    Builder

    Joined:
    Nov 26, 2014
    Messages:
    12
    Likes Received:
    0
    The taller z plate adds the option of an extra pair of v wheels for the z axis i.e. less flex. Always a good thing, especially if the designer felt it was a worthwhile addition. Any cost implication?
     
  22. Flu

    Flu New
    Builder

    Joined:
    Nov 22, 2014
    Messages:
    4
    Likes Received:
    0
    Hi Ben,

    I’d be interested in a set too, if shipment to Austria isn’t a problem.

    Regards
    Markus
     
  23. 1972

    1972 New
    Builder

    Joined:
    Sep 21, 2014
    Messages:
    24
    Likes Received:
    20
  24. Dutch

    Dutch New
    Builder

    Joined:
    Oct 27, 2014
    Messages:
    9
    Likes Received:
    0
    Hi.
    Taller Z plates will be nice option, if it will not bring cost to much.
     
  25. plexer

    plexer New
    Builder

    Joined:
    Sep 5, 2014
    Messages:
    93
    Likes Received:
    5
    I will send the dxf off to the waterjet company this weekend and as long as they can still fit 12 sets on a sheet with the taller z plate then I don't see cost should increase at all.

    @Markus shipping to other EU countries will be at cost but only those definitely in the first 12 will be getting them now unless anyone pulls out as my waterjet company can fit 12 sets on a sheet of material.

    Thanks

    Ben
     
  26. Keith turner

    Builder

    Joined:
    Nov 10, 2014
    Messages:
    7
    Likes Received:
    1
    Hi Ben,

    Taller Z plate ok with myself.

    Cheers
     
  27. John Robertson

    Builder

    Joined:
    Dec 4, 2014
    Messages:
    2
    Likes Received:
    0
    If not too late I'd also like a set please?
     
  28. plexer

    plexer New
    Builder

    Joined:
    Sep 5, 2014
    Messages:
    93
    Likes Received:
    5
    Hi John,

    I have to order these in multiples of 12 so I can add you to the reserve list.

    Guys I will be emailing the latest dxf with the taller Z to the waterjet company tonight sorry for the delay work is manic. As soon as I have confirmation the pricing is acceptable I'll get payment details sorted out.

    Ben
     
  29. Fabian68

    Fabian68 New
    Builder

    Joined:
    Nov 23, 2014
    Messages:
    57
    Likes Received:
    10
    Hello Ben
    I've been looking round the UK for a set of gantry plates without any luck. There were 2 in the US for around £95 +Postage so getting them from you seems to be the best bet.

    When you get around to setting up another list I'd be grateful if you would add my name to it. PayPal fine with me.

    When you have a spare moment please let me know if this request is OK and I'll stop hunting for the elusive plates.

    Regards

    Michael.
     
  30. plexer

    plexer New
    Builder

    Joined:
    Sep 5, 2014
    Messages:
    93
    Likes Received:
    5
    Hi Michael,

    I'll add you to the reserve list.

    Thanks

    Ben
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice