Welcome to Our Community

Some features disabled for guests. Register Today.

OpenBuilds OX CNC Machine

Discussion in 'CNC Mills/Routers' started by Mark Carew, Dec 15, 2013.

  1. SlyClockWerkz

    SlyClockWerkz Well-Known
    Builder

    Joined:
    Feb 26, 2014
    Messages:
    94
    Likes Received:
    34
    You're welcome :)

    PS. If anyone is in need of some OX plates I'd be happy to do up a set for someone (I'm U.S. based). I myself used the garolite material for my ox and it has worked out well. I even machined one of the side plates for the OX in aluminum today (on my OX) and it turned out nice (maybe not quite as nice as Robert or Chris's. I think due to the belt backlash, but entirely serviceable).
     
    Robert Hummel likes this.
  2. dddman

    dddman Journeyman
    Builder

    Joined:
    Mar 2, 2014
    Messages:
    468
    Likes Received:
    187
    What were your settings for the aluminum plate on the OX?
     
  3. SlyClockWerkz

    SlyClockWerkz Well-Known
    Builder

    Joined:
    Feb 26, 2014
    Messages:
    94
    Likes Received:
    34
    I used 6061 .26" thick. .025" per pass @30ipm 7ipm plunge. Single flute 1/8" carbide endmill (inches... i know)
     

    Attached Files:

    GrayUK and Robert Hummel like this.
  4. SlyClockWerkz

    SlyClockWerkz Well-Known
    Builder

    Joined:
    Feb 26, 2014
    Messages:
    94
    Likes Received:
    34
    Also, question (dont have any lying around) the eccentric spacers, whats the OD of the shoulder that goes into the plates? I see that the store has two varieties now 6mm and 1/4 whats the diff? Height? 6mm and 1/4 is nearly the same. Also, will this affect how I have the ox plates spaced?(I spaced them closer)
     
  5. WA4WZP

    WA4WZP New
    Builder

    Joined:
    Sep 16, 2014
    Messages:
    5
    Likes Received:
    0
    John, did you make your own side gantry pieces. If not, where did you get them and could I order a set?
     
  6. JWhitten

    JWhitten Well-Known
    Builder

    Joined:
    Sep 16, 2014
    Messages:
    62
    Likes Received:
    25
    I got them from Chris Laidlaw on ebay. His seller name is 'chrisclub'. Just go to ebay, type in "Openbuilds Ox" and you'll find his listings. I am impressed with how nice they are. Well cut, accurate and nice finishing.

    John
     
  7. WA4WZP

    WA4WZP New
    Builder

    Joined:
    Sep 16, 2014
    Messages:
    5
    Likes Received:
    0
    Thanks John. Just placed an eBay order!
     
  8. Paruk

    Paruk Journeyman
    Builder

    Joined:
    Jul 13, 2014
    Messages:
    397
    Likes Received:
    149
    Talking about the plates of Chris! Just received mine of him and I have to say it's a very, very nice job he did on it. They are looking nice with the black V-slot profiles. Waiting for just a couple of more parts (hopefully end of this week) and have to find a new tap and some screws etc. locally this week. The weekend is going to be building time. I probably will start a build topic to show the results.
     
  9. Rhinofart

    Rhinofart New
    Builder

    Joined:
    Jul 22, 2014
    Messages:
    34
    Likes Received:
    6
    Got my last part today. My 8mm Threaded Rod came in. I only ordered 1, but got 2. Mark, can you please let me know how to send the $$ for the 2nd one? I'm likely going to use it when I build the 2nd OX for my Dad. He keeps emailing me "Is it done yet?" LOL
     
    Robert Hummel likes this.
  10. Mark Carew

    Mark Carew OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Jun 28, 2013
    Messages:
    2,759
    Likes Received:
    2,438
    Thank you @Rhinofart for your honesty, please tell your Dad its on OpenBuilds :) Hope you guys have a great time with your builds :thumbsup:
     
    WA4WZP likes this.
  11. Rhinofart

    Rhinofart New
    Builder

    Joined:
    Jul 22, 2014
    Messages:
    34
    Likes Received:
    6
    Wooooot! Thank you Mark! Honesty totally IS the best policy. Even when it gets you in trouble with the wife sometimes. ;0)
     
    GrayUK and Mark Carew like this.
  12. Mark Carew

    Mark Carew OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Jun 28, 2013
    Messages:
    2,759
    Likes Received:
    2,438
    More then welcome my friend and so true a statement :D
     
  13. Robert Hummel

    Robert Hummel Custom Builder
    Moderator

    Joined:
    Nov 14, 2013
    Messages:
    978
    Likes Received:
    715
    All parts are now curing for assembly :)
    image.jpg
     
  14. Greenman

    Greenman New
    Builder

    Joined:
    Jan 21, 2014
    Messages:
    63
    Likes Received:
    19
    Just wanted to let people know I have laid in an extensive supply of Openbuild parts at Opensourceluthiersupply.com. Check out our site. Thanks
     
  15. Paruk

    Paruk Journeyman
    Builder

    Joined:
    Jul 13, 2014
    Messages:
    397
    Likes Received:
    149
    Did the mechanical build this afternoon and evening. Everything fits good and I have less than 1 mm difference on the Y between total front and total back position. Some fine tuning on the wheels have to be done to get them really perfect. Tomorrow I will make a thread for this build and post some pictures. Still waiting for the stepper drivers to arrive and than the electronic part will happen.

    Thanks to the excellent videos of Mark, all the good info and feed back on the forum and last (but not least) the excellent machined plates of Chris.
     
    Chris Laidlaw likes this.
  16. Rhinofart

    Rhinofart New
    Builder

    Joined:
    Jul 22, 2014
    Messages:
    34
    Likes Received:
    6
    Wow! Those look awesome!
     
  17. Rhinofart

    Rhinofart New
    Builder

    Joined:
    Jul 22, 2014
    Messages:
    34
    Likes Received:
    6
    Hey Mark.
    Quick one for you. It turns out that my lock nuts for the threaded rod are too small. They don't fit on the 8mm threaded rod. How do I go about exchanging them? I managed to get my TinyG hooked up last night, and performed some of the built in tests. This thing works great! So far. I just need to find a good procedure for configuring, and calibrating everything.
     
  18. James Kirkley

    Builder

    Joined:
    Sep 29, 2014
    Messages:
    3
    Likes Received:
    0
    I'm retired. I have followed the Phlatboyz on and off since the beginning, and haven't visited for a long while. But I spent all day yesterday, well into the night, pouring over this site.

    Originally the Phlatboyz printers were being used mainly for cutting foam board for the construction or RC foamy planes. That's where my interests were. I wanted either a Phlat Printer or CNC router. Besides PhlatBoyz, I also was a frequent visitor to the CNC Zone forums.

    It's only within the last year that things have been really coalescing in this maker space arena with 3D Printers and CNC routers and laser cutters. What 8020 did for extruded aluminum frame, Mark and others are doing in inventing economical components like V-Slot Wheels and Channel. So now you don't have to spend large sums of money, or go a million different places to acquire parts. You can shop in one spot and buy you parts that simply bolt together into a well proven design.

    It's has always been this monetary and complexity aspect of the hobby that has kept me from pulling the trigger.

    This OX is really something. It's really the evolution of the Phlat Printer into something way more useful. And to have an extensive build video that you can watch to see what is involved is really the best.

    So I'm going to spend all day again brainstorming and scouring this site.

    I do have a few questions:

    1.What's a good router in the $100 to $200 range...I don't need anything larger than 3 to 5 lbs..
    Bosh PR20EVSK Colt, Dewalt DWP611 seem to be popular...any others?
    The quieter the better.

    2. I know Chris makes OX plates as well as router holders. If Chris sees this, I'd like to know if the same router holder would hold different models like the Bosh Colt and Dewalt DWP611?

    3. I have no way of cutting the V-channel to length. I'd like a full 2' x 4' cutting area if at all possible. I think the large OX will do the 4' ok, but is a little shy on 2'. If I could get a full 24 to 25 in cutting width area, that would be awesome. I realize there would be some channel material left over. I don't think Mark does custom cutting, but maybe one of his distributors does.

    That's all I have for now.
     
    #1458 James Kirkley, Sep 30, 2014
    Last edited: Sep 30, 2014
  19. Mark Carew

    Mark Carew OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Jun 28, 2013
    Messages:
    2,759
    Likes Received:
    2,438
    Hello @Rhinofart
    Sorry for this mix up. Your best bet would be to contact the Part Store directly and I am sure they will take care of you.
    You can email them at http://support.openbuilds.com/support/home or us the contact form on the about us page here: http://openbuildspartstore.com/about-us/

    Hello @James Kirkley Welcome to the OpenBuilds community we are glad to have you here and looking forward to your build. I have been working on a V-Slot version of the Phlatprinter but its slow going at times with so many projects on the table :) I am looking forward to seeing more RC fab related machines here on OpenBuilds.
     
  20. Chris Laidlaw

    Chris Laidlaw Well-Known
    Builder

    Joined:
    Mar 1, 2014
    Messages:
    77
    Likes Received:
    27
    It turns out
    Hi James,

    Virtually all routers have a slightly different diameter and I like my clamps to be +/- .002" of the actual diameter, so I make a new design and program for each router mounting kit. I've shipped about 40 mounting kits so far and 611, Colt and Makita 700/701 make up over half of them. These are all roughly 2.5" diameter. The Bosch 1617 and Dewalt 618 in the 3.5" size make up about 20%.
    Then there are a few using spindle motors on their OX.

    [email protected]
     
    #1460 Chris Laidlaw, Sep 30, 2014
    Last edited: Sep 30, 2014
  21. Chris Laidlaw

    Chris Laidlaw Well-Known
    Builder

    Joined:
    Mar 1, 2014
    Messages:
    77
    Likes Received:
    27
    "I'd like to know if the same router holder would hold different models like the Bosh Colt and Dewalt DWP611?"

    Funny you should mention this. A builder and I spent almost 2 months on this very issue. I knew the diameter of the 611, but he had a Colt, and his caliper was broken so he couldn't measure the diameter, but he had heard the diameter is the "same" as the 611, so he told me to ship him a 611 mount. Needless to say, it did not fit, but we found the issue with his calipers (a bad battery), but then the Colt mount I sent got lost in Customs for two+ weeks, so I sent another one. One would think this is the end of the story, but no, he sent one of the unused mounts back, and I thought it was the 611 mount, so I sent it to a builder with a 611, but no, it was a Colt mount. That Colt mount has more frequent flyer miles than I do. :)

    Chris
     
    #1461 Chris Laidlaw, Sep 30, 2014
    Last edited: Sep 30, 2014
  22. Mark Carew

    Mark Carew OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Jun 28, 2013
    Messages:
    2,759
    Likes Received:
    2,438
  23. Chris Laidlaw

    Chris Laidlaw Well-Known
    Builder

    Joined:
    Mar 1, 2014
    Messages:
    77
    Likes Received:
    27
    I guess mine are similar, I saw a picture of those some time back, but I think mine are simpler and better :)

    (and my Mounting kits are designed to attach your router very rigidly to the Z axis of an Openbuilds OX CNC... no new holes required)
     
    #1463 Chris Laidlaw, Sep 30, 2014
    Last edited: Sep 30, 2014
  24. Techsavvy34

    Builder

    Joined:
    Aug 5, 2014
    Messages:
    12
    Likes Received:
    0
    Here's some pictures of the mount Chris made for my spindle. image.jpg image.jpg
     
  25. Frederic Goddeeris

    Builder

    Joined:
    Jul 15, 2014
    Messages:
    39
    Likes Received:
    19
  26. Mark Carew

    Mark Carew OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Jun 28, 2013
    Messages:
    2,759
    Likes Received:
    2,438
    I see, I thought you were working with them on this design as they look the same.
     
  27. Mark Carew

    Mark Carew OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Jun 28, 2013
    Messages:
    2,759
    Likes Received:
    2,438
    This is a very good stepper resource thanks @Zootalaws :thumbsup:
     
  28. Frederic Goddeeris

    Builder

    Joined:
    Jul 15, 2014
    Messages:
    39
    Likes Received:
    19
    I had the same issue; they where 6mm. Not sure if I miss ordered or not. I drilled the holes to 8 (first 6.5, than 7, 7.5 and 8) and that worked fine.

    Fred
     
  29. Mark Carew

    Mark Carew OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Jun 28, 2013
    Messages:
    2,759
    Likes Received:
    2,438
    Thanks for this feedback guys I have to check and be sure I find the mistake and correct it.
    Mark
     
  30. Mark Carew

    Mark Carew OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Jun 28, 2013
    Messages:
    2,759
    Likes Received:
    2,438
    We posted this over at the xPRO thread but thought it would fit here as well. The gsheild has been out of stock for quite a while so the OX parts list has been updated to the xPRO driver board as well. Hope it helps to get more OX builds up and running :)
    Just an update to let you guys know OpenBuilds Part Store now carries the xPRO CNC Stepper controller/Driver board!:thumbsup:
    http://openbuildspartstore.com/cnc-xpro-controller-stepper-driver/
    We really like the ease of use of this board and that it can handle most builds we are working on.
    Because its simple to use, we are hopeful this driver will become somewhat of a standard here for OpenBuilds projects.
    We are happy to be working with Spark-Concepts and look forward to and exciting future ahead and we hope that all of us here in the OpenBuilds community can supply helpful feedback.
    Thank you
    Mark
     
    Robert Hummel likes this.

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice