Welcome to Our Community

Some features disabled for guests. Register Today.

plasma cnc

Discussion in 'Other Builds' started by cureac, Nov 26, 2014.

  1. cureac

    cureac New
    Builder

    Joined:
    Mar 1, 2014
    Messages:
    18
    Likes Received:
    28
  2. Steve B

    Steve B Well-Known
    Builder

    Joined:
    Dec 12, 2014
    Messages:
    47
    Likes Received:
    47
    I'm starting to put together a BOM for an OX Plasma as well. Look forward to tracking your design, please post updates as you go. I plan on tweaking the standard OX design to accomplish the following:

    - 2 x 2 cutting area
    - portable, plan on placing the machine onto the material to be cut
    - mill compatible - be able to switch between milling and plasma
    - THC

    Have you thought about your electronics at all? Anything out there that includes THC or DTHC is really expensive.
     
  3. cureac

    cureac New
    Builder

    Joined:
    Mar 1, 2014
    Messages:
    18
    Likes Received:
    28
    today I bought 4 axis driver LV8727T4V1 and a power supply S-350-24 ( input 100-120v or 200-220 v depending on country output +24v 15A)
     
  4. Psychosaffa

    Builder

    Joined:
    Aug 16, 2014
    Messages:
    2
    Likes Received:
    0
    looking good. what plasma cutter are you using?
     
  5. cureac

    cureac New
    Builder

    Joined:
    Mar 1, 2014
    Messages:
    18
    Likes Received:
    28
    I have not bought plasma cutter
     
  6. Mark Carew

    Mark Carew OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Jun 28, 2013
    Messages:
    2,759
    Likes Received:
    2,438
    This is a great looking build so far @cureac looking forward to seeing this one in action. Thank you for sharing
     
  7. Jeferson SImoes

    Builder

    Joined:
    Mar 7, 2014
    Messages:
    16
    Likes Received:
    9
    @cureac what can you tell about the LV8727T4V1?
     
  8. cureac

    cureac New
    Builder

    Joined:
    Mar 1, 2014
    Messages:
    18
    Likes Received:
    28
    The driver is Chinese made. It's only working with mach 3, not compatible with emc2. The driver are 4 axis. 24 v, working well with nema 23, 250 Oz,4a.
     
  9. Bob Andres

    Builder

    Joined:
    Sep 7, 2014
    Messages:
    2
    Likes Received:
    0
    Hi new to the forum. I am a fabricator welder delving into the unknown world of building a plasma cnc.
    I bought a Chinese controller board USB6560 12V which also has on board drivers for 4 axis system. Just got the board and software it came with working today.
    I'm going to be using a Hypertherm plasma cutter. This is probably one of the best machines in the business.
    Dont worry about your welding it looks fine as long as the penetration is good no worries.
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice