Welcome to Our Community

Some features disabled for guests. Register Today.

Automated Linear Welding

Discussion in 'Other Builds' started by Breker, Apr 15, 2015.

  1. Breker

    Breker New
    Builder

    Joined:
    Apr 15, 2015
    Messages:
    1
    Likes Received:
    0
    I work in a metal fabrication shop and am looking into cheap, open-source options for building linear rail welders. The seams I am looking to automate are 5' in length and one solid bead.

    Because v-slot only comes in 1500 mm max lengths, I'm looking at using 2 x 1000 mm lengths of 60 mm. Does anyone have experience with joining such long lengths? What is the strength of the joints like?

    Thanks
     
  2. Jonny Norris

    Jonny Norris Well-Known
    Builder

    Joined:
    Aug 17, 2014
    Messages:
    495
    Likes Received:
    95
    You could make the joints very strong but 20mm thick profile at anything over 1500 will be very flexible. Id be looking to use mild steel over that length with either hiwin carriages and square rail or cheaper option you could just weld on some v rail.
     
  3. Rick 2.0

    Rick 2.0 OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Dec 20, 2013
    Messages:
    2,892
    Likes Received:
    1,549
    The strength of your joints will be whatever the strength of your backer is. Butt joints have no inherent strength. And while you could join the two sections with double tee nuts, I don't know as I'd trust them for your specific application. With a piece of 3x2x1/8 aluminum tubing as a backer you should have no difficulty keeping the alignment straight.

    You might also give some thought as to dealing with the heat generated in the process and its impact on plastic wheels. The steel wheels and rail configurations discussed here might be worth consideration.
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice