Welcome to Our Community

Some features disabled for guests. Register Today.

V-Slot Custom Rack & Pinion

Discussion in 'General Talk' started by Adam Filipowicz, Apr 14, 2018.

  1. Rob Taylor

    Rob Taylor Master
    Builder

    Joined:
    Dec 15, 2013
    Messages:
    1,470
    Likes Received:
    748
    Also check out these racks that are screwed in the other way: McMaster-Carr

    Might be interesting for strength purposes.

    (And their plastic gears and racks are dirt cheap to experiment with...)
     
  2. David Riedell

    Builder

    Joined:
    Feb 11, 2020
    Messages:
    6
    Likes Received:
    4
    @Rob Taylor

    Onshape

    Check out branch B1. Instead of putting the stepper on spacers I just moved the pivot plate out with a 9mm aluminum spacer. It's only a slightly wider footprint but it would definitely give us more flexibility as far as what racks and spur gears to use inside the c-beam.

    That lets me double the width of the rack and the spur gear and have the rack through-mounted up to the top of the c-beam. I like this idea better.

    upload_2020-2-13_16-17-20.png
     

    Attached Files:

  3. Rob Taylor

    Rob Taylor Master
    Builder

    Joined:
    Dec 15, 2013
    Messages:
    1,470
    Likes Received:
    748
    That looks much more sturdy, for sure. My only concern is the spring/bolt tensioner, seems like just being sprung like that it could be susceptible to inefficient jiggling around the pitch height and uneven wear, or even skipping. Enough tension to hold it against the force of the motor and the spindle might be too much tension to hold the pitch diameter at the pitch height, and rather force the teeth too far into mesh. Would one or two bolts with some arc slots and spacers be a little more of a positive location strategy? Not to mention more manufacturable in terms of BOM, that arm is a whole assembly in itself. Looks cool, but I feel like it would also get in the way of attaching other things to the plate in general- gantry columns, a z-axis, whatever.
     
  4. David Riedell

    Builder

    Joined:
    Feb 11, 2020
    Messages:
    6
    Likes Received:
    4
    Yeah you couldn't attach a gantry column to this setup on the outside of the machine. It would have to be mounted to the interior plate, so it would limit X travel by a little bit. Unless you double the height of the C-Beam Gantry Plate and attach the gantry column to the top part. But I would have some concerns about rigidity if you did that.

    The spring assembly I basically stole from CNC Router Parts, see below. Seems to work well enough for them. (Of course they're using hardened steel gear racks and I believe aluminum pinions, so it would depend on the materials used for the Openbuilds machine.)

    I'm not sure what you mean by bolts with arc slots and spacers, do you have an example?

    [​IMG]
     
  5. Mark Carew

    Mark Carew OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Jun 28, 2013
    Messages:
    2,759
    Likes Received:
    2,438
    That looks great David! We also are working to stay in the system as much as we can and keep it as simple to build and use in any area of the system.
    Like Rob mentions above if your able to move the belt system to the outside of the plate using standoffs you may be able to take advantage of having the room for a heavy duty off the shelf rack system which is a nice advantage.
     
    Peter Van Der Walt likes this.
  6. David Riedell

    Builder

    Joined:
    Feb 11, 2020
    Messages:
    6
    Likes Received:
    4
    Hi Mark, thanks for the response!

    I agree, it makes more sense to move the belt outside like I posted above, because it gives us much more room to work with inside the C-beam for the rack and spur gears. This is a link to my branch with an additional 9mm aluminum spacer moving the pivot plate out, so that the belt can be in between the C-beam plate and the pivot plate.
    Onshape

    upload_2020-2-14_8-58-10.png

    Assuming the Rack and Pinion system is on the exterior of the Y Axis C-beams to mitigate getting chips stuck in the gearing, it does make it difficult to mount the gantry column as you guys typically do on the LEAD CNC. I think it would require a new, longer C-Beam Plate similar to what you do on the workbee.

    upload_2020-2-14_9-2-36.png

    upload_2020-2-14_9-4-55.png
     

    Attached Files:

    Mark Carew likes this.
  7. SailingBuild

    Builder

    Joined:
    Feb 16, 2024
    Messages:
    4
    Likes Received:
    0
    Not to bring up an old thread, but did you build this? Im currently working on a larger footprint cnc that needs rack and pinion, and even though, i am looking at the delrin internal tslot rack, I will need to do some sort of sprung setup like this. Just wondering if there is some feedback on how well the design worked out.
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice