I've been trying this out today on my MacBook Pro. Two things to note. 1. It doesn't seem to run very well in Safari 2. On a Mac when selecting you use the 'alt' key not the 'ctrl' key. That's as far as I have got. Just getting my head around inside cuts, outside cuts and pockets etc.
Dzień dobry rozpoczynający się z openbuilds cam. Posiadam projekt do wycięcia laserem pliku svg i cad, po wrzuceniu projektu do programu i zaznaczeniu kilku czynności i utworzeniu nazwy nazwy i jak laser może wywołać wyskakuje mi taki komunikat. „Wystąpił błąd:TypeError: Nie można odczytać właściwości nieznanych (odczyt „dzieci”)”. Prosze o pomoc i mogą jakieś materiały dla absolwentów (posiadanie szkoleń z programów)???. Posiadam maszynę LEAD 1010. Może mam ustawienia złe pod maszyną. Już opadnięte ręce.
English only please, see section 15 of the terms you agreed to during registration: Terms of Service and Rules | OpenBuilds
Good morning starting with openbuilds cam. I have a project to cut an SVG and CAD file with a laser, after uploading the project to the program and selecting a few activities and creating a name, name and how the laser can be called, this message pops up. "Error: TypeError: Unable to read unknown properties (reading 'children')." I am asking for help and some documents for graduates (possessing qualifications from programs)??? I have a LEAD 1010 machine. Maybe my settings are wrong on the machine. My hands are already slumped.
docs:software:file-errors [OpenBuilds Documentation] most likely, invalid children objects inside the SVG. Give it nice clean Path data to work with. Also see docs:software:overview [OpenBuilds Documentation] though, for lasers we highly recommend Lightburn
Hello, I hadn't used my lead1515 in a while, had to reboot the laptop and reinstall controll etc... but now that I'm setting it up again I have an issue with the Z axis when I run a job ( I use it for plasma cutting) I don't have a Z-probe so I always set xyz 0 manually. But when I do this now and run the job, the head moves to the right x-y space and then proceeds to plunge in Z way beyond point 0 until it gives an alarm about not finding the Z-probe. The only place I can find anything about a Z probe setting is in Openbuilds CAM settings under "Plasma: Touch Off Sequence" which has as a setting "G38.2 Z-30 F500; Touch off Probe G10 L20 Z-3; Set Z Zero" I have no idea if that is the issue and what I'm supposed to enter in the box to stop it from looking for the Z-probe.