Hello everyone I have mounted a 1010 workbee with a blackbox the motors move in the right direction and the limit switch functions. I can not get the numeric values in the open builds software of the machine position, it always remains "Disable" here are the screenshots I specify that I use a nema 213 motor from stepperonline reference: Nema 23 Bipolar 1.8deg 1.9Nm (269oz.in) 3A 3.36V 57x57x76mm 4 Wires ref 23HS30-3004S the cable connection is as follows engine / Blackbox Black (A +) / Red (A +) Green (A -) / Blue (A-) Red (B +) / Green (B +) Blue (B -) / Yellow (B-) has anyone ever had the problem? What could I have forgotten? Thank you for your help
Troubleshooting tab > application diagnostics > untick Disable DRO You've accidentally disabled the DROs - that menu is for disabling features on slow PCs