Welcome to Our Community

Some features disabled for guests. Register Today.

Delta-Six

Discussion in '3D printers' started by Sage, Jan 26, 2014.

  1. DiggerJ

    DiggerJ Journeyman
    Builder

    Joined:
    Sep 2, 2014
    Messages:
    412
    Likes Received:
    109
    Rostock at our local MakerSpace (Area515)
    I can join month to month. $37.50 gets me access to all the tools (including print time)
     
  2. Robert Hummel

    Robert Hummel Custom Builder
    Moderator

    Joined:
    Nov 14, 2013
    Messages:
    978
    Likes Received:
    715
    Nice :)
     
  3. DiggerJ

    DiggerJ Journeyman
    Builder

    Joined:
    Sep 2, 2014
    Messages:
    412
    Likes Received:
    109
    Yeah, except the guy who charged me $200.00 to print my Laurtr3k parts is also a member and prolly not owerwhelmed by me printing these for about $25.00!!!
    Decent group of people, and I am only one of three people checked out to use the printer, so I get tons of time.
     
  4. Nugz

    Nugz New
    Builder

    Joined:
    Oct 8, 2014
    Messages:
    58
    Likes Received:
    10
    I had something similar happen to me. I came here to build a CNC router in order to build an all aluminum Delta printer I was designing after watching Werner Berry's "BerryBot 3D" videos on youtube. It wasn’t long before I stumbled into the Delta-Six build. Now I need a 3D printer to build a 3D printer. Conclusion: A guy can never have enough tools. :D
    -Nugz
     
  5. Kyo

    Kyo Veteran
    Staff Member Builder Resident Builder

    Joined:
    Feb 27, 2014
    Messages:
    673
    Likes Received:
    702
    Nice, We could really use a makerspace around here (nearest one is about 120miles away) But being in a small community ( population of roughly 1,500 ) I don't know how well one would do..


    So True. lol I get project side tracked easier then most and it almost always involves more / new tools. Or learning how to use those tools.
     
    #125 Kyo, Dec 8, 2014
    Last edited: Dec 8, 2014
  6. dddman

    dddman Journeyman
    Builder

    Joined:
    Mar 2, 2014
    Messages:
    468
    Likes Received:
    187
    So, up to now (a lot of parts, but nothing for the extruder yet, excepting the effector)

    - M5x35mm --> 12X
    - M5x40mm --> 3 packs of 10
    - M5x10mm --> 3 packs of 25

    - M3x12mm --> 12X
    - M3x16mm --> 12X
    - M3x20mm --> 12X

    - M3 nuts --> 24X
    - M5 lock-nuts --> 15X
    - M5 t-nuts --> 3 packs of 25

    - Eccentric spacers --> 15X
    - 1/4" spacers --> 18X
    - 1mm shims (for mini v-wheels) --> 24X

    - Carbon rods --> 6X 240mm
    - Traxxas joint --> 12X
    - GT2 (2mm) belt --> 3X 1400mm
    - GT2 (2mm) pulley 20 teeth 5mm shaft --> 3X
    - Mini v-wheels --> 12X
    - Idler pulley kit --> 3X

    - Limit switches --> 3X
    - Heated bed --> 1X
    - Nema17 steppers --> 3X
    - Arduino Mega with Ramps (or your own choice) --> 1X
    - 12V supply ( I have a 29 amps) --> 1X

    - 2040 V-slots 300mm --> 6X
    - 2040 V-slots 600mm --> 3X

    - Printed vertexes (vertices?) --> 6X
    - Printed carriage --> 3X
    - Aluminum plates for the carriage --> 6X
    - Aluminum plates for the idlers --> 3X
    - Effector (of your choice) --> 1X
    - Extruder of your choice (not there yet... you'll have to design it yourself if you can't wait :p ) --> 1X

    I covered much of it, I surely forgot something (murphy's law) but this BOM is much more complete than the original one :p
     
  7. Nugz

    Nugz New
    Builder

    Joined:
    Oct 8, 2014
    Messages:
    58
    Likes Received:
    10
    Too funny! :ROFL:
    Wish we had a MakerSpace in my neck of the woods.
    -Nugz
     
  8. dddman

    dddman Journeyman
    Builder

    Joined:
    Mar 2, 2014
    Messages:
    468
    Likes Received:
    187
    I feel that I have to answer to that :p Did you know that PLA/PHA is 4 times the price of PLA? Did you know too that Lautr3K is a freaking lot a parts too? I'm happy for you, you did found a place to print them yourself for cheap, specially that 25$ isn't even the price of a filament roll :)
     
  9. DiggerJ

    DiggerJ Journeyman
    Builder

    Joined:
    Sep 2, 2014
    Messages:
    412
    Likes Received:
    109
    Ummm...I think I should be a bit more specific. The other member I spoke of is a member of our local makerspace, NOT a member here. My parts are ABS, and If you do some research, you can see that many of the popular filament vendors claim to make their own filament, but use the same manufacturer. The price of PLA/PHA is indeed twice the price of PLA, and is by all accounts, better in the right application. We buy our ABS for about $25/KG roll. Depending on color, + or - a couple of bucks. Prints great, and no problems with crazy shaft variance.

    Sorry if it seemed I was faulting anyone here.
     
  10. dddman

    dddman Journeyman
    Builder

    Joined:
    Mar 2, 2014
    Messages:
    468
    Likes Received:
    187
    That's fine :p Back to Delta Six?
     
  11. DiggerJ

    DiggerJ Journeyman
    Builder

    Joined:
    Sep 2, 2014
    Messages:
    412
    Likes Received:
    109
    I am building mine with magnetic ends and ball bearings. How can i help?
    We are using the wffector and carriages from Infill3d on Thingiverse. I have magnets and theaded ball bearings on the way.
     
  12. Robert Hummel

    Robert Hummel Custom Builder
    Moderator

    Joined:
    Nov 14, 2013
    Messages:
    978
    Likes Received:
    715
    So all three carriages are assembled and running smooth, then it's just a matter of aligning/running the belts:D
    image.jpg
    Once my CF tubs arrive the real fun will start ;)
    Again dddman has come through with awesome printed parts
    Here's some eye candy
    image.jpg
     
    DiggerJ and Jestah like this.
  13. Robert Hummel

    Robert Hummel Custom Builder
    Moderator

    Joined:
    Nov 14, 2013
    Messages:
    978
    Likes Received:
    715
    Got the Effector with 1.75mm E3Dv6 done :D
    image.jpg
     
  14. DiggerJ

    DiggerJ Journeyman
    Builder

    Joined:
    Sep 2, 2014
    Messages:
    412
    Likes Received:
    109
    I really long for the day that i do something before you :banghead:
     
    SlyClockWerkz likes this.
  15. Robert Hummel

    Robert Hummel Custom Builder
    Moderator

    Joined:
    Nov 14, 2013
    Messages:
    978
    Likes Received:
    715
    Lol :p
     
  16. DiggerJ

    DiggerJ Journeyman
    Builder

    Joined:
    Sep 2, 2014
    Messages:
    412
    Likes Received:
    109
    Well, I just found out that my lathe does not have a through hole, making it much harder to turn down these screws! Never needed it before, but now when I do...

    On the upside, the RobotDigg 8/20 lead screw fits the Y carriage on the Lautr3k at full length. Only need to turn the end down to 5mm for a length of 12mm.
     
    Robert Hummel likes this.
  17. Robert Hummel

    Robert Hummel Custom Builder
    Moderator

    Joined:
    Nov 14, 2013
    Messages:
    978
    Likes Received:
    715
    Little further with the E3D6
    image.jpg
     
  18. Robert Hummel

    Robert Hummel Custom Builder
    Moderator

    Joined:
    Nov 14, 2013
    Messages:
    978
    Likes Received:
    715
    Carbon tubes showed up yesterday, I cut them all to length and then epoxied the traxx in place on one end.
    image.jpg
    image.jpg
    I now have to build a jig in order to get the other ends in and all of them to be the same length
     
  19. Robert Hummel

    Robert Hummel Custom Builder
    Moderator

    Joined:
    Nov 14, 2013
    Messages:
    978
    Likes Received:
    715
    Here it is, a simple but effective jig :)
    image.jpg
    I have done all six rods and they are now curing.
     
    Jestah likes this.
  20. Robert Hummel

    Robert Hummel Custom Builder
    Moderator

    Joined:
    Nov 14, 2013
    Messages:
    978
    Likes Received:
    715
    Test fitting of the arms went well :D
    image.jpg
     
  21. DiggerJ

    DiggerJ Journeyman
    Builder

    Joined:
    Sep 2, 2014
    Messages:
    412
    Likes Received:
    109
    You are moving right along! Looking good.
     
  22. Robert Hummel

    Robert Hummel Custom Builder
    Moderator

    Joined:
    Nov 14, 2013
    Messages:
    978
    Likes Received:
    715
    Ty, most of my waiting times are due to shipping wait times but in between it gives me time for other things :)
    Now that I got things in it sure is moving nicely :)
    Special thanks to dddman for all printed parts and more :thumbsup:

    We've been working together on a few projects, this being the major one and it just goes to show how we have a great bunch people here.

    Here are some pics of an i3 style printer that again dddman and I are building.
    He is taking care of modding/printing and collecting all 3d parts used and I'm modding the laser DFX files so they can be milled on an OX.
    I will be posting the files when I'm done as a OX project in my OX AI build along with a few other fun projects :)
    My frame and progress
    image.jpg
    image.jpg
    image.jpg
    This printer is being built out of 1/4 lime acrylic, recycled inkjet printer rails and other gathered parts from the local hardware store :)
     
  23. snokid

    snokid Journeyman
    Builder

    Joined:
    Oct 11, 2014
    Messages:
    335
    Likes Received:
    104
    the cuts look great, Robert what do speed/feed and cutter do you use?
     
  24. Robert Hummel

    Robert Hummel Custom Builder
    Moderator

    Joined:
    Nov 14, 2013
    Messages:
    978
    Likes Received:
    715
    Ty !
    I use my used 45 helex two flute bits after a few run in aluminum.
    Spindle @10000 rpm and feed is 40 ipm
     
  25. Robert Hummel

    Robert Hummel Custom Builder
    Moderator

    Joined:
    Nov 14, 2013
    Messages:
    978
    Likes Received:
    715
    Soapy water is what I use as a cutting fluid with acrylic ;)
     
  26. snokid

    snokid Journeyman
    Builder

    Joined:
    Oct 11, 2014
    Messages:
    335
    Likes Received:
    104
  27. Robert Hummel

    Robert Hummel Custom Builder
    Moderator

    Joined:
    Nov 14, 2013
    Messages:
    978
    Likes Received:
    715
    Yep that's it and spindle speed won't matter much in acrylic as long as your feed is fast and you keep things cool with cutting fluids "soap water in my case"
     
  28. Robert Hummel

    Robert Hummel Custom Builder
    Moderator

    Joined:
    Nov 14, 2013
    Messages:
    978
    Likes Received:
    715
    BTW that's a fare price on the bit as long as it performs :)
     
  29. Jeffscnc

    Jeffscnc New
    Builder

    Joined:
    Jan 2, 2015
    Messages:
    6
    Likes Received:
    0
    I believe they are still giving away delta 3d printer ABS part kits away on the Google delta Kossel forum free, only catch is that you have to promise to make and give two more kits away, it's like a pay it forward type of gig.
     
  30. snokid

    snokid Journeyman
    Builder

    Joined:
    Oct 11, 2014
    Messages:
    335
    Likes Received:
    104
    that's a cool idea.
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice