Welcome to Our Community

Some features disabled for guests. Register Today.

CNC ROUTER BUILDS

Cancelled - Modified OX CNC for Mitre Cutting (Picture Framing)

Jul 22, 2015
Category
CNC ROUTER BUILDS
Build Progress
Build in Progress...

Creating a CNC mitre (45°) cutter, for picture frame cutting. Starting with an OX, but inverting various parts and adding a material table, with a stepper-controlled measuring guide.

Vic Aussie Ox

Jul 28, 2015
Category
Cartesian Style CNC
Build Progress
Build in Progress...

Dove in and ordered the kit from Makerstore in Melbourne. While awaiting for the order watched videos and sourced steppers and controllers from China. Had some fun with the 4 axis TB6600 controller board. Ran into a few problems with the build, but after stripping and restarting looks like I am on track.

Cousin CNC OX Router

Nov 1, 2018
Category
Cartesian Style CNC
Build Progress
Build in Progress...

A lower profiled machine. Built all out of aluminum. Removable control panel/PC unit. Option for vacuum table and cooling pump for a spindle.

Persnickety Plate Maker

Aug 13, 2015
Category
X/Y Table Style CNC Mill
Build Progress
Build in Progress...

My very first attempt at a CNC build. Based on the OpenBuilds C-Beam Machine, small tweaks will be made to tailor it for my goals: machining G10, aluminum & some carbon fiber for use with multirotor and motorcycle parts. I am looking forward to the day when I am comfortable enough to bring the ideas in my head to the tip of the end mill in a smooth fashion...

1200 x 2700 CNC based on OX

Aug 20, 2015
Category
Cartesian Style CNC
Build Progress
Build in Progress...

Preliminary design for cnc based on OX for cutting wood sheet products (ply, MDF etc.) for a sheet size of 1200mm x 2700mm

My Belt & Pinion Drive CNC Router

Aug 28, 2015
Category
Cartesian Style CNC
Build Progress
Build in Progress...

My CNC Router design and inspiration came from the Routy CNC project. I modified some of the aspects of the Routy build, but left the original XY dimensions intact. The build has been very enjoyable thus far and am nearing completion of all wiring in preparation for my first test run!

Pretty Standard + Slave X Axis

Sep 12, 2015
Category
CNC ROUTER BUILDS
Build Progress
Build in Progress...

Planning my build, just looking for design input at the moment. I definitely want a slave X axis. I am potentially going to go with one of the 1500W Chinese water cooled spindles.

RiNo Route

Jan 5, 2017
Category
CNC ROUTER BUILDS
Build Progress
Build Complete!

A CNC router designed to handle a 4'x8' sheet, for as close to $2000 as possible. The price barrier resulted in my choice to use timing belts rather than leadscrews or rack&pinion. Build List still being updated

OX-SUMO, SUMO-OX, OXSUMO?

Nov 10, 2015
Category
Cartesian Style CNC
Build Progress
Build in Progress...

One meter square. Short and stout.... reminds me of a Sumo Wrestler. A temporary and adjustable configuration I have devised to cut my own plates. I have kicked around ideas for about a year and the C-Beam extrusion has made this attempt to realize my ideas irresistible. This is just one step towards bigger and better things!

The Bull Dog, A RoverCNC OX based 1500mm x 1500mm CNC - Tutorial build

Jan 20, 2016
Category
Cartesian Style CNC
Build Progress
Build in Progress...

I have based this build on the OX build so I will not be going into too much detail of specefic assembly modules as they asre so well covered by Mark Carew already, but will go through the complete build on video. I will be addig additional tutorials on steppers and the other electronic parts as needed though as this project is sponsored by RS Components in the form of most of the Electronics and this is also the key focus of my YouTube channel www.youtube.com/c/thebreadboardca.

The Ox That Wood

Dec 18, 2015
Category
Cartesian Style CNC
Build Progress
Build in Progress...

This is my story about my need for a CNC router on a budget that wound up in the $5K range !!! but I have a good belt drive Ox

Wakezor

Dec 27, 2015
Category
Cartesian Style CNC
Build Progress
Build in Progress...

I'm starting my first own build cnc machine which is inspired by routy and the ox. Were my goal was not to use the ox plates but use the standard plates available in the parts store for the design.

eeYZee Router

Aug 18, 2016
Category
Other Style CNC Mills
Build Progress
Build in Progress...

The first criteria was portability, the second was cutting out a sheet of ply, the third was the ability to shape a foam surfboard blank, but the main criteria was a small budget.

The MULE (an OX inspired 3-axis CNC)

Jan 15, 2016
Category
Cartesian Style CNC
Build Progress
Build in Progress...

The Mule is a 3-axis CNC inspired by the OX CNC by Mark Carew. This machine borrows the OX's sturdy frame and upgrades the X and Y linear actuators through the use of three 500mm lead screws (as opposed to the belt system of the OX). The result is an inexpensive, sturdy, and powerful design built for cutting tough materials such as aluminum.

Desktop CNC

Oct 15, 2018
Category
Cartesian Style CNC
Build Progress
Build Complete!

This unit is made with openbuild v-rail and c-beam. using direct drive with lead screws. Nema23 motors

C-Beam Plate Machine

Feb 23, 2016
Category
X/Y Table Style CNC Mill
Build Progress
Build Complete!

My first openbuilds submission, plain old c-beam machine. Seems like I've spent more time fighting the forum here redirecting in circles than actually building the machine. I'll try to add more pics if I ever find a path out of this corn maze...

Textile machine bearing structures CNC engraving machine

Mar 21, 2016
Category
CNC ROUTER BUILDS
Build Progress
Build Complete!

With the textile machine bearing feel better strength, better durability 用纺织机轴承感觉强度要好一些,耐用性更好

Murphy OX-CNC Dreamin

Mar 12, 2016
Category
Cartesian Style CNC
Build Progress
Build in Progress...

I am in the design phase of my CNC. I would like to thank everyone who has placed resources on the site. I am using it to the up most! I will update as I continue the design and share my progress.

Ooznest build - 1500mm x 1000mm

Apr 2, 2016
Category
Cartesian Style CNC
Build Progress
Build in Progress...

Its the first build for me so its just the story of me attempting to build the kit and hopefully end up with something I can use. Hopefully without destroying anything or anyone.

Expanded Routy using 290 build instructions

Apr 6, 2016
Category
CNC ROUTER BUILDS
Build Progress
Build in Progress...

Using the Routy290 build and an awful lot of help from puntoMX, this machine has been expanded in the X and Y axis. My first build, I'm learning a lot about all of this. I've had to disassemble parts of this thing many times due to forgetfulness, but that's ok. Also, I've forgotten to take constant pictures throughout the build.

New Custom CNC with C-Beam Rails

Apr 20, 2016
Category
X/Y Table Style CNC Mill
Build Progress
Build in Progress...

Hello all, wanted to share my custom build that I planed to do. My idea was to drill foam blocks to make molds for my projects. The CNC will be 1500-1500mm with a higher Z-Axis. So I redesigned the Gantry Plates that will be cut out at some other place. I hope you can share your opinion on my project.

OX Super "C" - Cpmpleted 11/02/16

Dec 2, 2016
Category
Cartesian Style CNC
Build Progress
Build Complete!

This CNC utilizes the C-BEAM extruded aluminum for the "X", "Y", and "Z" axis. The gantry will move similar to the OX along with the "Z" except I am incorporating the C-BEAM instead of the 20x60 V-RAIL. To make the system as strong as possible I am using two C-BEAM rails back to back. The "Y" axis will encompass two sets of roller on both side of the C-BEAM extruded rails for added strength. All of the plates for this were created using the C-BEAM machine I completed several month ago.

Idea for any axis support and Drive

Apr 27, 2016
Category
CNC ROUTER BUILDS
Build Progress
Build in Progress...

Just an idea right now but will attempt a prototype in the near future. Not sure if this has been tried before or not.....

Plate 'o CBEAM

May 3, 2016
Category
Cartesian Style CNC
Build Progress
Build in Progress...

I'm starting with the c-beam bundle, and I hope to end up with a pretty useful little platemaker/shallow relief carver. I'm hoping to discover how accurate and efficient it can be.

My First CNC Machine

Jun 2, 2016
Category
Other Style CNC Mills
Build Progress
Build in Progress...

This will be a step by step record charting my successes and failures in my voyage of discovery while building a CNC router. Please excuse my English-English which may lose something in translation to American-English. I would be grateful for any advice during the build

Matt's Ox

Aug 8, 2016
Category
Cartesian Style CNC
Build Progress
Build Complete!

I'm building an OX CNC router. It will be the larger size of 750x 1000mm. This should give me a working area of about 22"x30".

Ooznest OX CNC for Architecture Modell

Jun 12, 2016
Category
CNC ROUTER BUILDS
Build Progress
Build in Progress...

While i achieved the desired taler Z axis this was very notable of the cost of the stiffness of the Y axis - the Y axis is now quite wobbly. i do not recommend such a big Z axis on a OX CNC machine where the requirement is a good precision.

My first build: a other OX CNC

Aug 31, 2016
Category
Cartesian Style CNC
Build Progress
Build Complete!

I love to build things. I decided to build a CNC machine to help me build more things! I had a lot of fun and I learn a lot of thing in the process of building this machine. p.s. my primary language is french not english. Forgive me if I made some mistake.

1x1m Ooznest Ox

Jul 12, 2016
Category
Cartesian Style CNC
Build Progress
Build in Progress...

Building my first router and I choose the ooznest Ox since it looks to be the latest and greatest among routers.

C-Beam Big Mouth

Jun 27, 2016
Category
CNC ROUTER BUILDS
Build Progress
Build in Progress...

My first build was with the basic C-Beam Build. I soon found the z clearance a little constricting So I added 2 500 mm actuators to support the x axis rail . I also left off the front and back y axis support rails for easy cleaning. I mounted the base of the machine to 1/2" mdf with 10/32 screws and blind nuts.

C-Beam Prototype

Jul 15, 2016
Category
Cartesian Style CNC
Build Progress
Build in Progress...

This is a variant of a typical OX (Mark Carew inspiration) router using C-Beams/8mm Acme rods to drive all three axis. I went with a 1000mm x 1000mm frame size. Useable space is 28" (711mm) X 26" (660mm) with a Z axis work travel of approx. 3.25" (82.5mm). A TinyG is used as a controller along with Fusion 360/Chilipper as the software for generating and running gcode files.

Metalguru's C-Beam 750

Jul 12, 2016
Category
Cartesian Style CNC
Build Progress
Build in Progress...

This is a C-Beam build, fairly heavy duty, and 750mm x 750mm. Should be a good, sturdy machine that's relatively easy to assemble.

Dream to practical

Nov 26, 2016
Category
Cartesian Style CNC
Build Progress
Build in Progress...

This is my journey from a dream machine to a practical (for me) machine. This is a Cartesian style frame that can change tool heads quickly. The first version will have milling and 3D printing tool heads. Later on I'll add a drag knife tool head.

Jim's C-Beam Machine Build

Jan 29, 2017
Category
X/Y Table Style CNC Mill
Build Progress
Build Complete!

This machine is fantastic. Teamed up with Fusion 360, Inkscape, and GrblPanel, I'm well on my way towards making at least one Christmas gift this year. I had some frustrating times during the build, mainly with getting everything to go together square, but overall it was fun. I can see that I'm going to need to be a bit creative in order to max out the work area for this machine so that I can produce the product I bought it for, but it will be able to do so much more for me as well.

My 1st C-Beam Router

Aug 13, 2016
Category
Cartesian Style CNC
Build Progress
Build in Progress...

Pretty happy with the build, had some difficulty with the software loading up the settings due to me using the wrong com.

BrandoneOuX

Aug 29, 2016
Category
CNC ROUTER BUILDS

I'm Brandoneous; hence, the BrandoneOuX, a cartesian CNC build. Large format (1000mm x 1000mm) but beefed-up to solidly augment the ability to cut Aluminum in addition to wood and other solid materials. As I am currently living in a rented apartment for an out-of-state job, my secondary challenge is to build a sound dampening enclosure that will function as a torsion box base, a sound dampening enclosure, and a dust containment system. Easy, right? Well, we'll see... Join my journey

My first CNC - The C-Beam Basic

Sep 14, 2016
Category
X/Y Table Style CNC Mill
Build Progress
Build in Progress...

I am a newbie and this is my first build. After hours and hours of research I decided on the C-Beam. I will be changing one or two things but I will basically be building this as per Mark's video.

Hobby OX CNC

Oct 24, 2016
Category
CNC ROUTER BUILDS
Build Progress
Build Complete!

This "hobby OX" CNC is built for multiple purposes such as cutting and engraving various materials, laser etching and cutting, etc... Its a great platform for hobby enthusiasts like me where this machine can be used for so many different purposes effectively and efficiently!

Reference sensor for CNC Tools

Nov 1, 2016
Category
CNC ROUTER BUILDS
Build Progress
Build Complete!

For the x and y Axis you set the zero point with a limit switch, but how can you get the zero position for the z Axis? You have different thickness of material to mill and when you change the tool, you have also a other z Axis positon. With the Sensor, you can define the zero position of the piece automaticly.

C-Beam Machine XL

Feb 9, 2017
Category
Cartesian Style CNC
Build Progress
Build Complete!

Overview of my experience building the C-Beam Machine XL from OpenBuilds, along with updates as I move along and get it going. My application is for creating plates needed for lab functions, 19 rack bay covers, and whatever else arises.

Cartesian CNC router

Nov 22, 2016
Category
CNC ROUTER BUILDS
Build Progress
Build Complete!

This project has been a steep learning curve in an unfamiliar area for me. It has been a very rewarding experience and has opened up so many more possibilities to pursue in the future.

Kruk 0.1

Nov 27, 2016
Category
Cartesian Style CNC
Build Progress
Build Complete!

This is a stool, designed in 18mm wood for a cnc router, it's easily scaleable to different wood-thicknesses, in 18mm wood it takes up 1200*1200mm. It can be assembled without screws, nails or glue and can therefore also be easily disassembled.

Stainless OX kit

Dec 28, 2016
Category
Cartesian Style CNC
Build Progress
Build in Progress...

This is a 1500 X 1500 Stainless OX kit build, by a cnc novice. It is the first cnc machine i have ovned and build I got this kit from http://makersupplies.dk/20-ox-cnc-kits

CBeam OX

Dec 30, 2016
Category
CNC ROUTER BUILDS
Build Progress
Build in Progress...

i wanted to use both the ox and the C beam C beam for the gantry because its stronger i also made the gantry 20 mm higher so i can cut thinker material i will maybe later go to rack& pinion on the 1500 mm Y axes also instead of the V wheels i will maybe go to hiwin in the furture

Large C-Beam Sphinx style CNC Build

Jan 12, 2017
Category
Cartesian Style CNC
Build Progress
Build in Progress...

Started my build of a large Sphinx style cnc Router. I wanted one to handle the Dollar Tree Foam Board (DTFB) so I am making this to handle 2' X 3'. This is my first endeavor for a CNC so I am learning as I go but there is one thing for sure.

Loading...
Loading Build images...
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice